Sony DSC-T7 (serv.man2) Service Manual ▷ View online
2-5
2. DISASSEMBLY
2. DISASSEMBLY
DSC-T7
2-3. CIRCUIT BOARDS LOCATION
NAME
FUNCTION
CCD IMAGER
MULTI CONNECTOR
LENS DRIVE, CAMERA A/D CONV., TIMING GENERATOR, CAMERA DSP, LENS CONTROL,
256M SDRAM, AUDIO PROCESS, CONNECTOR, DC/DC CONVERTER
MULTI CONNECTOR
LENS DRIVE, CAMERA A/D CONV., TIMING GENERATOR, CAMERA DSP, LENS CONTROL,
256M SDRAM, AUDIO PROCESS, CONNECTOR, DC/DC CONVERTER
CD-541
MC-149
MC-149
SY-115
MC-149
CD-541
SY-115
2-6E
2. DISASSEMBLY
2. DISASSEMBLY
DSC-T7
2-4. FLEXIBLE BOARDS LOCATION
The flexible boards contained in the lens block is not shown.
CONTROL SWITCH BLOCK
(RL51710)
(RL51710)
CONTROL SWITCH BLOCK
(GP51710)
(GP51710)
SW-454
MS-258
DSC-T7
HELP
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
1
2
3
4
5
To prevent the cabinet (front) assembly from
producing a gap, install the screws in the order
as in the figure on the right when reassembling.
producing a gap, install the screws in the order
as in the figure on the right when reassembling.
When reassembling, attach the CCD insulation sheet first, and then
attach the CD radiation sheet, adhesive surface of the CD-541 board.
attach the CD radiation sheet, adhesive surface of the CD-541 board.
When reassembling, insert the claw of the cabinet (front)
assembly under the claw of the cabinet (rear) assembly
at the deep end of the hole "a".
assembly under the claw of the cabinet (rear) assembly
at the deep end of the hole "a".
Cabinet (front) assembly
Claw
Claw of the Cabinet
(rear) assembly
(rear) assembly
Claw of the Cabinet
(rear) assembly
(rear) assembly
Hole a
Claw of the Cabinet
(rear) assembly
(rear) assembly
Claw of the Cabinet
(front) assembly
(front) assembly
Claw of the Cabinet
(front) assembly
(front) assembly
Adhesive surface of the
CD-541 board
CD-541 board
CD radiation sheet
CD-541 board
2
3
Note:
Removing it CCD imager as a
single unit requires adjustment.
CCD insulation sheet
CCD insulation
sheet
sheet
1
CD radiation sheet
HELP 01
HELP 02
HELP 03
DSC-T7
HELP
HELP 04
(disassembly of the control
switch block (GP51710))
(disassembly of the control
switch block (GP51710))
a
a
Control switch block (GP51710)
1
Insert a flat-tipped object such as a flat-head
screwdriver or tweezers into the gap on the control
switch block (GP51710). While slightly raising the
control switch block (GP51710), forcefully press the
two portions "a" in the direction of the arrow.
3
Insert a flat-tip object such as a flat-head screwdriver
or tweezers in the gap on the control switch block
(GP51710). While slightly raising the control switch
block (GP51710), forcefully press the two portions "b"
in the direction of the arrow.
2
4
Control switch block (GP51710)
b
b
Click on the first or last page to see other DSC-T7 (serv.man2) service manuals if exist.