Sony DSC-T500 (serv.man2) Service Manual ▷ View online
1-2
DSC-T500_L2
1-4. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)
Note 1:
When replacing the SY-209 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-209 board, execute formatting and initializing the internal memory after replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting permanently erases all data in the internal memory, including even protected images.
1
Touch [Format].
The message “All data on internal memory will be erased” appears.
The message “All data on internal memory will be erased” appears.
2
Touch [OK].
Formatting starts.
Formatting starts.
To cancel the formatting
Touch [Cancel] or [BACK] in step
2
.
Format
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having sufficient free capacity.
2 Touch [Copy].
The message “All data on internal memory will be copied” appears.
3 Touch [OK].
Copying starts.
To cancel the copying
Touch [Cancel] or [BACK] in step
3
.
• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot select images to copy.
• The original images in the internal memory are retained even after copying. To delete the contents of the
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then format the internal memory
([Format] in [Internal Memory Tool])
([Format] in [Internal Memory Tool])
• A new folder is created on the “Memory Stick Duo” and all the data will be copied to it. You cannot
choose a specific floder and copy images to it.
choose a specific floder and copy images to it.
• The
DPOF
(Print order) marks on the images are not copied.
Copy
1-2. PRECAUTION ON REPLACING THE LENS
When replacing the lens, write down the PITCH/YAW data and wide limit data given on the data sheet of the replacement lens for service.
Refer to Service Manual ADJ, and perform “Wide Limit adj” and “Angular velocity sensor sensitivity adj”.
Refer to Service Manual ADJ, and perform “Wide Limit adj” and “Angular velocity sensor sensitivity adj”.
Note:
The PITCH/YAW data and wide limit data of lens are written only repair parts.
Wide Limit Data (2-byte data)
XXXX
YAW data
t
L2
PITCH/YAW Data
PITCH data
t
L1
P.PP / Y.YY
P.PP/ Y.YY
XXXX
1-3. PRECAUTION ON REPLACING THE MICROPHONE
Exchange two pieces at the same time when exchange microphones.
Adjust the condition of the reflow to 240 degrees or less and make time that it reaches 240 degrees within 30 seconds.
Do not close the sound hole when reflow.
Adjust the condition of the reflow to 240 degrees or less and make time that it reaches 240 degrees within 30 seconds.
Do not close the sound hole when reflow.
1-3
DSC-T500_L2
1-5. INTERNAL MEMORY (Write Enable)
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
1. Function of Each Button on INTERNAL MEMORY (Write Enable) Screen
Click the [INTERNAL MEMORY (Write Enable) ] button on the Main Menu screen, and the follwing “INTERNAL MEMORY (Write
Enable)” screen will appear.
Enable)” screen will appear.
2. INTERNAL MEMORY (Write Enable)
[Preparations]
•
•
Insert the battery pack.
•
Remove the Memory Stick.
[Procedure]
[Procedure]
[Procedure]
[Procedure]
[Procedure]
1) Click the [Activate Write Enable] button.
2) Upon completion of the setting change, the following message will be displayed.
1) Click the [Activate Write Enable] button.
2) Upon completion of the setting change, the following message will be displayed.
3) Disconnect the lead wire from the GND of the modified multioutput stand.
4) Disconnect the USB cable and reconnect the USB cable to activate the MassStorage mode for the USB connection.
5) Write the data read out into the PC to the internal memory of the camera.
6) Exit the adjustment program, and turn off the power of the camera, and the write enable setting will be cancelled.
4) Disconnect the USB cable and reconnect the USB cable to activate the MassStorage mode for the USB connection.
5) Write the data read out into the PC to the internal memory of the camera.
6) Exit the adjustment program, and turn off the power of the camera, and the write enable setting will be cancelled.
1
2
3
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
[Activate Write Enable] button
Change the setting so that the data can be written to the
internal memory.
Change the setting so that the data can be written to the
internal memory.
3
[Procedure] button
Indicate the procedure.
Indicate the procedure.
1-4
DSC-T500_L2
1-6. SELF-DIAGNOSIS FUNCTION
1-6-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-6-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen
shows a 4-digit display consisting of an alphabet and numbers, which
blinks at 3.2 Hz. This 5-character display indicates the “repaired
by:”, “block” in which the problem occurred, and “detailed code”
of the problem.
shows a 4-digit display consisting of an alphabet and numbers, which
blinks at 3.2 Hz. This 5-character display indicates the “repaired
by:”, “block” in which the problem occurred, and “detailed code”
of the problem.
0 0
3 2
C
Repaired by:
Refer to “1-6-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
13 ....Format the “Memory Stick Duo”.
32 ....Turn on power again.
step to be taken.
E.g.
13 ....Format the “Memory Stick Duo”.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
E : Corrected by service
engineer
LCD screen
C : 32 : 00
1-5
DSC-T500_L2
1-6-3. Self-diagnosis Code Table
C
C
E
E
E
E
E
E
E
E
E
Block
Function
1
3
3
2
6
1
6
1
6
2
6
2
6
2
6
2
6
2
9
1
9
2
Detailed
Code
0
1
0
1
0
0
1
0
0
2
1
0
1
1
1
2
2
0
0
1
0
0
Symptom/State
The internal memory has experienced
a media error.
a media error.
The internal memory has experienced
a format error.
a format error.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” type error
The camera cannot read or write data on
the “Memory Stick Duo”.
the “Memory Stick Duo”.
Trouble with hardware
Difficult to adjust focus
(Cannot initialize focus)
(Cannot initialize focus)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
Abnormality of IC for steadyshot.
Lens initializing failure.
Lens overheating (PITCH).
Lens overheating (YAW).
Abnormality of thermistor.
Abnormality when flash is being charged.
Non-standard battery is used.
Self-diagnosis Code
Repaired by:
Correction
Turn the power off and on again.
Format the internal memory.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a supported “Memory Stick Duo”.
Turn the power off and on again, or taking out and inserting the
“Memory Stick Duo” several times.
“Memory Stick Duo” several times.
Turn the power off and on again.
Retry turn the power on by the power switch. If it does not recover,
check the focus reset sensor of lens block (pin 6 of CN1208 on
the SY-209 board). If it is OK, check the focus motor drive IC
(IC902 on the SY-209 board).
check the focus reset sensor of lens block (pin 6 of CN1208 on
the SY-209 board). If it is OK, check the focus motor drive IC
(IC902 on the SY-209 board).
Retry turn the power on by the power switch. Check the zoom
reset sensor of lens block (pin 9 of CN1208 on the SY-209 board),
if zooming is performed when the zoom button is operated. If it is
OK, check the zoom motor drive IC (IC902 on the SY-209 board).
reset sensor of lens block (pin 9 of CN1208 on the SY-209 board),
if zooming is performed when the zoom button is operated. If it is
OK, check the zoom motor drive IC (IC902 on the SY-209 board).
Check or replacement of the IC for steadyshot (IC1003 on the SY-
209 board).
209 board).
Check or replacement of the IC for steadyshot (IC1003 on the SY-
209 board).
209 board).
Check the HALL element (PITCH) of optical image stabilizer (pin
ea
ea
, es of CN1208 on the SY-209 board). If it is OK, check PITCH
angular velocity sensor (SE1002 on the SY-209 board) peripheral
circuits.
circuits.
Check the HALL element (YAW) of optical image stabilizer (pin
ed
ed
, ef of CN1208 on the SY-209 board). If it is OK, check YAW
angular velocity sensor (SE1001 on the SY-209 board) peripheral
circuits.
circuits.
Check the OIS temp sensor of optical image stabilizer (pin wa of
CN1208 on the SY-209 board).
CN1208 on the SY-209 board).
Checking of flash unit or replacement of flash unit. (Note)
Use the compatible battery only.
Note:
After repair, be sure to perform “1-7. PROCESS AFTER FIXING FLASH ERROR”.
Click on the first or last page to see other DSC-T500 (serv.man2) service manuals if exist.