Sony DSC-T50 (serv.man4) Service Manual ▷ View online
6-2
DSC-T50_ADJ
INITIAL LANGUAGE Default Data Check
If the SY-164 board is replaced, initial language setting may be changed. Check the default data of INITIAL LAN-
GUAGE if destination code is right. If not, rewrite to the right value.
GUAGE if destination code is right. If not, rewrite to the right value.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page
Address
Data
Language
GP1
GP2
GP3
GP4
4F
84
00
English
z
z
z
01
Japanese
z
04
Spanish
z
z
06
Portugal
z
08
Simplified Chinese
z
0B
Russian
z
0D
Korean
z
GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 84, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 84, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
6-3
DSC-T50_ADJ
Method for Copying or Erasing the Data in Internal Memory
(Internal Memory/Music)
(Internal Memory/Music)
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)
internal memory.)
Note 1:
When replacing the SY-164 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-164 board or the IC401 on the SY-164 board, execute formatting and initialize the
internal memory after replacement.
internal memory after replacement.
Method for copying the data in internal memory
Method for formatting the internal memory
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having 64 MB or larger capacity.
2 Touch [COPY].
2 Touch [COPY].
The message “All data in internal memory will be copied Ready?” appears.
3 Touch [OK].
Copying starts.
• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files
using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or
possibly corrupting the data.
possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory)..
• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a
• Even if you copy data, a
(Print order) mark is not copied.
Copy
OK
Copies the image files in the internal memory.
Cancel
Cancels the copying.
Copying
102_COPY
60min
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
The message “All data in internal memory will be erased Ready?” appears.
Format
OK
Formats the internal memory.
Cancel
Cancels the formatting.
6-4
DSC-T50_ADJ
Method for formatting the Music
If you cannot play back a Music file for the Slide Show, the Music file might be corrupted. If
this happens, perform [Format Music].
When [Format Music] is performed, all the Music files are erased. Use the supplied
application software “Music Transfer” to activate [Download Music].
this happens, perform [Format Music].
When [Format Music] is performed, all the Music files are erased. Use the supplied
application software “Music Transfer” to activate [Download Music].
The message “All data will be erased Ready?” appears.
Format Music
OK
Formats the Music files. All data other than Music files remain as
it is.
it is.
Cancel
Cancels the formatting.
6-5
DSC-T50_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit, Touch panel
Backlight unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Camera DSP)
(Audio, Video amp.)
(64M super AND) (Note 4)
(LCD drive)
(PITCH, YAW sensor)
LCD901
D901
D002
IC101
IC301
IC601
IC401
IC901
SE501, SE502
(COMPLETE)
(COMPLETE) (Note 3, 4, 5)
Lens block
CCD block assy (Including CD-614 flexible board and CCD imager)
Flash unit
LCD block
LCD block
BT-030 flexible board
SY-164 board
SY-164 board
SY-164 board
SY-164 board
SY-164 board
SY-164 board
BT-030 flexible board
SY-164 board
VIDEO adjustment
Video output level adj.
z
z
z
CAMERA adjustment 1
Hall adj.
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 2
Flange back adj.
z
z
z
CAMERA adjustment 3
Flange back check
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 6
Strobe adj.
z
z
z
z
CAMERA adjustment 7
Auto focus illumination check
z
z
z
CAMERA adjustment 8
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
Control system adjustment
Touch panel adj.
z
z
(Note 1)
Initialization of data
z
z
z
z
z
z
CAMERA adjustment 5
z
CAMERA adjustment 4
z
z
LCD adjustment
z
z
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data” and “Wide Limit Adjustment”. Perform them
manually.
manually.
Note 2:
Use the AWB Adjustment Program (T50AwbAdjustment.exe).
Note 3:
When replacing the SY-164 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-164 board or the IC401 on the SY-164 board, execute formatting and initialize the internal memory after
replacement.
replacement.
Note 5:
When replacing the SY-164 board, perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” after re-
placement.
placement.
Table 6-1-1
