Sony DSC-T300 (serv.man3) Service Manual ▷ View online
6-32
DSC-T300_ADJ
2.
Switch Check
Click the [Switch Check] button on the SERVICE MODE screen,
and the “SWITCH CHECK” screen will appear.
and the “SWITCH CHECK” screen will appear.
Using method:
Click the [Start] button, and the switch check will start.
During execution of switch check, the pressed switch is displayed
in orange. Also, once the switch was pressed, its name characters
change to blue in color.
Click the [Start] button, and the switch check will start.
During execution of switch check, the pressed switch is displayed
in orange. Also, once the switch was pressed, its name characters
change to blue in color.
2-2.
SERVICE MODE
1.
Function of Each Button on Service Mode Screen
Click the [SERVICE MODE] button on the Main Menu screen, and
the “SERVICE MODE” screen in Fig. 6-2-2 will appear.
the “SERVICE MODE” screen in Fig. 6-2-2 will appear.
Fig. 6-2-2
1
[To Menu] button
Return to the main manu.
Return to the main manu.
2
[Switch Check] button
“SWITCH CHECK” screen appears.
“SWITCH CHECK” screen appears.
3
[LED Check] button
“LED CHECK” screen appears.
“LED CHECK” screen appears.
4
[Record Data] button
“RECORD DATA” screen appears.
“RECORD DATA” screen appears.
5
[Aging] button
“AGING” screen appears.
“AGING” screen appears.
1
4
5
2
3
6-33
DSC-T300_ADJ
4.
Record Data
Click the [Record Data] button on the SERVICE MODE screen,
and the “RECORD DATA” screen will appear.
and the “RECORD DATA” screen will appear.
The record data such as Lifetime counter is displayed.
Initializing method:
Click the [Clear Shot Count] button on the screen, and the Lifetime
Count data will be initialized.
Click the [Clear Shot Count] button on the screen, and the Lifetime
Count data will be initialized.
3.
LED Check
Click the [LED Check] button on the SERVICE MODE screen, and
the “LED CHECK” screen will appear.
the “LED CHECK” screen will appear.
Using method:
LED ON or OFF can be controlled with [LED ON] or [LED OFF]
button on the screen.
LED ON or OFF can be controlled with [LED ON] or [LED OFF]
button on the screen.
6-34
DSC-T300_ADJ
5.
Aging
On the AGING screen, various types of aging can be executed.
Select the type of aging to be executed with the Aging Mode Se-
lect buttons.
Select the type of aging to be executed with the Aging Mode Se-
lect buttons.
Supply the power not from an AC adapter but from the fully charged
battery and execute the aging until the battery end, so that its bat-
tery use time and how many pictures the camera can record/play
back can be checked.
battery and execute the aging until the battery end, so that its bat-
tery use time and how many pictures the camera can record/play
back can be checked.
During the execution of aging, the camera automatically repeats
recording/playback.
During the recording, if the recording memory capacity becomes
full, its memory is automatically formatted.
Accordingly, when executing the aging, insert the Memory Stick
into the camera.
recording/playback.
During the recording, if the recording memory capacity becomes
full, its memory is automatically formatted.
Accordingly, when executing the aging, insert the Memory Stick
into the camera.
[Preparation]
For the aging, set the camera as follows:
For the aging, set the camera as follows:
Setting icon on the screen:
1) Flash mode ....................................................................... Auto
1) Flash mode ....................................................................... Auto
Home Items
1) Shooting ...................................................... Auto Adjustment
2) AF Mode
1) Shooting ...................................................... Auto Adjustment
2) AF Mode
(Settings – Shooting Settings – Shooting Settings 1) .... Single
Menu Items
1) REC Mode ................................................................... Normal
1) REC Mode ................................................................... Normal
(1) 10MODE
In the 10MODE, perform continuous recording in accordance with
the CIPA Standard. When the 10MODE starts, the following op-
eration is repeated until the battery end.
1) The zoom moves to the TELE end.
2) The camera records a still picture with a strobe light flashed at
the CIPA Standard. When the 10MODE starts, the following op-
eration is repeated until the battery end.
1) The zoom moves to the TELE end.
2) The camera records a still picture with a strobe light flashed at
the maximum level.
3) The camera stands by for the time (sec.) set to the “Rec Inter-
val”.
4) The zoom moves to the WIDE end.
5) The camera records a still picture without flashing a strobe
5) The camera records a still picture without flashing a strobe
light.
6) The camera stands by for the time (sec.) set to the “Rec Inter-
val”.
7) Each time 10 still pictures are recorded, the power is turned
off, and after the time (min.) set to the “Power Off Interval”,
the power is turned on again.
the power is turned on again.
At the start of 10MODE, the counter in the camera is initialized.
This counter counts the number of recording times during the ex-
ecution of 10MODE, and it holds the counts even during the power
off.
This counter counts the number of recording times during the ex-
ecution of 10MODE, and it holds the counts even during the power
off.
Aging Mode Select button
6-35
DSC-T300_ADJ
10MODE screen and functions of each item
1
[Preparation] button
Notes for aging is displayed.
Notes for aging is displayed.
2
Rec Interval setting and display
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
3
Power Off Interval setting and display
The setting of power off interval (min.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
The setting of power off interval (min.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
4
[START] button
The settings of parameters specified by the Rec Interval and
Power Off Interval for execution of 10MODE are sent to the
camera.
The 10MODE starts when the camera power is turned off once
and then on again.
The settings for execution of 10MODE are held until the cam-
era detects the battery end. They cannot be reset by the power
off or RESET button. To interrupt the 10MODE, use the [STOP]
button.
The settings of parameters specified by the Rec Interval and
Power Off Interval for execution of 10MODE are sent to the
camera.
The 10MODE starts when the camera power is turned off once
and then on again.
The settings for execution of 10MODE are held until the cam-
era detects the battery end. They cannot be reset by the power
off or RESET button. To interrupt the 10MODE, use the [STOP]
button.
5
[STOP] button
The settings for execution of 10MODE are reset.
The settings for execution of 10MODE are reset.
6
[GET] button
After the 10MODE was executed, the number of recording
times is got from the counter in the camera. The result is dis-
played in the “Count” display field.
After the 10MODE was executed, the number of recording
times is got from the counter in the camera. The result is dis-
played in the “Count” display field.
7
Count display
The number of recording times got by the [GET] button is dis-
played.
The number of recording times got by the [GET] button is dis-
played.
(2) AGING_REC
In the AGING_REC mode, still pictures are continuously recorded
at the interval (sec.) set to the “Rec Interval”.
At the start of AGING_REC, the counter in the camera is initial-
ized. This counter counts the number of recording times during
the execution of AGING_REC, and it holds the counts even dur-
ing the power off.
at the interval (sec.) set to the “Rec Interval”.
At the start of AGING_REC, the counter in the camera is initial-
ized. This counter counts the number of recording times during
the execution of AGING_REC, and it holds the counts even dur-
ing the power off.
AGING_REC screen and functions of each item
1
[Preparation] button
Notes for aging is displayed.
Notes for aging is displayed.
2
Rec Interval setting and display
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
3
[START] button
The AGING_REC starts. In the AGING_REC mode, the ag-
ing starts immediately when the [START] button is clicked.
At the battery end, the AGING_REC stops. To interrupt the
AGING_REC, use the [STOP] button, though the AGING_REC
stops also by the power off or RESET button.
The AGING_REC starts. In the AGING_REC mode, the ag-
ing starts immediately when the [START] button is clicked.
At the battery end, the AGING_REC stops. To interrupt the
AGING_REC, use the [STOP] button, though the AGING_REC
stops also by the power off or RESET button.
4
[STOP] button
The AGING_REC stops.
The AGING_REC stops.
5
[GET] button
After the AGING_REC was executed, the number of record-
ing times is got from the counter in the camera. The result is
displayed in the “Count” display field.
After the AGING_REC was executed, the number of record-
ing times is got from the counter in the camera. The result is
displayed in the “Count” display field.
6
Count display
The number of recording times got by the [GET] button is dis-
played.
The number of recording times got by the [GET] button is dis-
played.
6
4
5
1
7
2 3
5
3
4
1
6
2
Click on the first or last page to see other DSC-T300 (serv.man3) service manuals if exist.