DOWNLOAD Sony DSC-T300 (serv.man2) Service Manual ↓ Size: 1.89 MB | Pages: 52 in PDF or view online for FREE

Model
DSC-T300 (serv.man2)
Pages
52
Size
1.89 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-t300-sm2.pdf
Date

Sony DSC-T300 (serv.man2) Service Manual ▷ View online

SERVICE MANUAL
LEVEL
 
2
Link
DISASSEMBLY
SERVICE NOTE
SPECIFICATIONS
SCHEMATIC DIAGRAMS
FRAME SCHEMATIC DIAGRAM
BLOCK DIAGRAMS
REPAIR PARTS LIST
PRINTED WIRING BOARDS
Link
Revision History
Revision History
Sony EMCS Co.
DSC-T300_L2
Internal memory
ON BOARD
Internal memory
ON BOARD
Ver. 1.5  2010.03
DIGITAL STILL CAMERA
2010C0800-1
  © 2010.03
Published by Tokai TEC
9-852-253-33
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Thai Model
Japanese Model
Tourist Model
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
• Precaution on Replacing the SY-191 Board
DSC-T300
Photo: Silver
Precaution on Replacing the Exterior Screw
DSC-T300_L2
— 2 —
SPECIFICATIONS
Camera
[System]
Image device: 7.7 mm (1/2.3 type) color CCD, 
Primary color filter
Total pixel number  of camera:
Approx. 10.3 Mega pixels
Effective pixel number of camera:
Approx. 10.1 Mega pixels
Lens:
Carl Zeiss Var io-Tessar 5
× zoom lens
f = 5.8 – 29.0 mm (33 – 165 mm (35 mm
film equivalent))
F3.5 (W) – F4.4 (T)
Exposure control: Automatic exposure, Scene 
Selection (11 modes)
White balance: Automatic, Daylight, Cloudy, 
Underwater White Balance: Auto, Underwater 
1, 2, Flash
Fluorescent 1, 2, 3, Incandescent, Flash
 
File format (DCF compliant): 
Still images: Exif Ver.  2.21 JPEG compliant, 
DPOF compatible
Movies: MPEG1 compliant (Monaural)
Recording media: Internal Memory 
(approx. 15 MB), “Memory Stick Duo”
Flash: Flash range (ISO sensitivity 
(Recommended exposure Index) set to Auto): 
Approx. 0.1 to 3.5 m (4 inches to 11 feet 
5 7/8 inches) (W)/approx. 0.8 to 2.7 m (2 feet 
7 1/2 inches to 8 feet 10 3/8 inches) (T)
[Input and Output connectors]
Multi connector: Video output
Audio output (Monaural)
USB communication
USB communication: Hi-Speed USB (USB 2.0 
compliant)
[LCD screen]
LCD panel: 
Wide (16:9), 8.8 cm (3.5 type) TFT drive
Total number of dots: 230 400 (960 
× 240) dots
[Power, general]
Power: Rechargeable battery pack NP-BD1, 3.6 V 
NP-FD1 (not supplied), 3.6 V
AC-LS5K AC Adaptor  (not supplied), 4.2 V
Power consumption (during shooting): 
1.0 W
Operating temperature: 0 to 40˚C (32 to 104˚ F)
Storage temperature: –20 to +60˚C (–4 to +140˚F)
Dimensions:  94.0 
× 59.3 × 21.4 mm
(3 3/4 
× 2 3/8 × 7/8 inches) 
(W/H/D, excluding protrusions)
Mass (including NP-BD1 battery pack, paint pen 
and strap etc.):
Approx. 177 g (6.2 oz)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
BC-CSD battery charger
Power requirements: AC 100 V to 240 V,  
50/60 Hz, 2.2 W
Output voltage: DC 4.2 V, 0.33 A
Operating temperature: 0 to 40˚C (32 to 104˚ F)
Storage temperature:  –20 to +60˚C (–4 to 
+140˚F)
Dimensions: Approx. 62 
× 24 × 91 mm (2 1/2 × 
31/32 
× 3 5/8 inches) (W/H/D)
Mass: Approx. 75 g (2.7 oz)
Rechargeable battery pack 
NP-BD1
Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Capacity: 2.4 Wh (680 mAh)
Design and specifications are subject to change 
without notice.
DSC-T300_L2
— 3 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
FLEXIBLE Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1-1
ENGLISH
JAPANESE
ENGLISH
JAPANESE
DSC-T300_L2
1. SERVICE  NOTE
1-2. SELF-DIAGNOSIS  FUNCTION
1-2-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-2-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen
shows a 4-digit display consisting of an alphabet and numbers, which
blinks at 3.2 Hz. This 5-character display indicates the “repaired
by:”, “block” in which the problem occurred, and “detailed code”
of the problem.
0 0
3 2
C
Repaired by:
Refer to “1-2-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
13 ....Format the “Memory Stick Duo”.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
engineer
LCD screen
1-1. PRECAUTION  ON  REPLACING  THE  SY-191  BOARD
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Refer to Service Manual ADJ, and perform “DESTINATION DATA WRITE”.
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Refer to Service Manual ADJ, and perform “USB SERIAL No. INPUT”.
Page of 52
Display

Sony DSC-T300 (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony DSC-T300 (serv.man2) Service Manual ↓ Size: 1.89 MB | Pages: 52 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-T300 (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-T300 (serv.man2) Digital Camera. Information contained in Sony DSC-T300 (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.