DOWNLOAD Sony DSC-S600 (serv.man2) Service Manual ↓ Size: 1.56 MB | Pages: 35 in PDF or view online for FREE

1-1

DSC-S600_L2

Self-diagnosis display
• C: ss: ss

You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)

• E: ss: ss

Contact your Sony dealer or local
authorized Sony service facility.

Display Code

  C:32:ss

  C:13:ss

Countermeasure

Turn the power off and on again.

Cause

Trouble with hardware.

Caution Display During Error

SYSTEM ERROR

FORMAT ERROR

MEMORY STICK ERROR

  E:61:ss

  E:91:ss

  E:92:ss

Turn the power off and on again.

Trouble with internal memory.

INTERNAL MEMORY ERROR

Checking of lens drive circuit.

When failed in the focus and zoom
initialization.

—

Checking of flash unit or replacement
of flash unit.

Insert batteries correctly.

Abnormality when flash is being
charged.

Batteries are not inserted correctly.

Format the “Memory Stick Duo” or
internal memory.

“Memory Stick Duo” or internal memory is
unformatted.

Insert a new “Memory Stick Duo”.

“Memory Stick Duo” is broken.

1-2

DSC-S600_L2

Copies all images in the internal memory to a “Memory Stick Duo”.

1

Insert a “Memory Stick Duo” having 32 MB or larger capacity.

2

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.

3

Select [OK] with v, then press z.
Copying starts. 

Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files 
using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly 
corrupting the data.
You cannot copy individual images.
The original images in the internal memory are retained even after copying. To delete the contents of the 
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 

 (Internal Memory Tool) (page 46).

You cannot select a folder copied on a “Memory Stick Duo”.
Even if you copy data, a 

 (Print order) mark is not copied.

OK

See the following procedure.

Cancel

Cancels the copying.

This item does not appear when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with 

.

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.

2

Select [OK] with v, then press z.
The format is complete.

OK

See the following procedure.

Cancel

Cancels the formatting.

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)

Note1: When replacing the SY-145 board, erase the data in internal memory of the board before replacement.
Note2: When replacing the SY-145 board or the IC203 on the SY-145 board, execute formatting and initialize the internal memory after replacement.

1-3E

DSC-S600_L2

Cabinet (front) assembly

LB-117 board

Remove the claw

LB-117 board

S101 switch
(Lens barrier open)

SW-461 board

Adhesive tape

solder the leads

Remove the LB-117 board from the cabinet (front) asembly, solder the leads to the SW-461 board, and fix the S101 switch (Lens barrier 
open) to the ON position with an adhesive tape.

• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not required.
• Perform “Initial Language Data Check” mentioned below, and also the adjustment items necessary after SY Board replacement.

If the SY-145 board was replaced, initial language setting may be changed. Accordingly, change the following data so as to set same initial
language as that of the set distributing in each region.

Initial language: Language displayed at the next starting if the setting of Setup menu was reset.

It is different from the language setting selectable with the menu.

GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.

Writing Method:
1)

Select page: 00, address: 01 and set data: 01.

2)

Select page: 4F, address: 8C, and set the Initial Language Data.

3)

Select page: 40, address: 38, and set data: 00.

4)

Click [Save] on the SEUS screen.

5)

Select page: 80, address: 34, and check that the data is “00”.

6)

Select page: 80, address: 30, and check that the data is “00”.

7)

Select page: 00, address: 01, and set data: 00.

8)

Turn off the camera.

9)

Turn on the camera. Execute “Initialize” of Setup screen.

10) Check the language displayed when the camera starts.

Page

Address

Data

Language

GP2

GP3

GP4

4F

8C

00

English

z

z

z

04

Spanish

z

z

06

Portugal

z

08

Simplified Chinese

z

0B

Russian

z

0D

Korean

z

DSC-S600_L2