Sony DSC-S3000 (serv.man3) Service Manual ▷ View online
– 5 –
DSC-S3000_L2
(4) Clean the surface of the BARRIER ASSY with ethyl alcohol.
(5) Attach the COSMETIC RING ASSY.
Outside
Inside
INTER BLOCK 1 AND FIXED BARREL DISASSEMBLING/ASSEMBLING METHOD
Removal
(1) Disconnect the soldered connection.
(2) Remove the four screws. (4-277-820-01)
(3) Remove the REAR RETAINER.
REAR RETAINER
– 6 –
DSC-S3000_L2
2ND FOCUS GEAR
ZOOM LONG GEAR
Half-extend barrel
Tele-end
(4) Remove the 2ND FOCUS GEAR and the ZOOM LONG GEAR.
(5) Turn the gear part in the arrow direction with a flat-blade screwdriver.
(6) Turn the half-extend barrel in the arrow direction to the Tele-end.
FPC
Passed
(7) Pass the FPC through the hole.
(8) Remove the PI part with a tool such as flat-blade screwdriver.
(9) Release the hooked FPC, and remove the other PI part with a tool such as flat-blade screwdriver.
PI part
Flat-blade screwdriver
Flat-blade screwdriver
Hooked FPC
– 7 –
DSC-S3000_L2
Hooked
Unhooked
The end-loop of
REAR LENS SPRING
REAR LENS SPRING
COVER TAPE
REAR LENS
FOCUSING
SHAFT ASSY
SHAFT ASSY
REAR LENS
SPRING
SPRING
(10) Remove the COVER TAPE.
(11) Unhook the end-loop of REAR LENS SPRING.
(12) Remove the following three items together.
Retracted
FIXED BARREL
The inner-block_1
(13) Turn the Tele-ended barrel in the arrow direction to the retracted position.
(14) Turn the gear part in the arrow direction with a flat-blade screwdriver.
(15) Remove the inner-block_1 from the FIXED BARREL.
– 8 –
DSC-S3000_L2
The inner-block_1
SHUTTER ASSY
The inner-block_2
DRIVE CAM BARREL
The inner-block_3
The inner-block_2
LINEAR GUIDE BARREL
FRONT BARREL ASSY
The inner-block_3
(16) Remove the SHUTTER ASSY.
(17) Detach the DRIVE CAM BARREL.
(18) Detach the LINEAR GUIDE BARREL.
LINEAR GUIDE BARREL
FRONT BARREL ASSY
The inner-block_3
Space for the lever of Lens barrier
FRONT BARREL ASSY
LINEAR GUIDE BARREL
Installation
(1) Align the FRONT BARREL ASSY with the LINEAR GUIDE BARREL as shown in the figure.
(2) Assemble the FRONT BARREL ASSY and the LINEAR GUIDE BARREL as the inner-block_3 as shown in the figure.
Click on the first or last page to see other DSC-S3000 (serv.man3) service manuals if exist.