Sony DSC-RX1RM2 (serv.man2) Service Manual ▷ View online
4-2-6.
Cabinet (Front) Block Section-2
• Refer to
“Cabinet (Front) Block Section-2”
on exploded view for Ref. No.
[1]
[11]
[18]
[16]
[17]
[12]
[13]
[14]
[15]
[2]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[3]
251
252
256
257
253
254
255
261
267
267
268
269
270
271
271
272
262
263
264
265
266
258
259
273
274
275
276
277
278
260
ns
ns
#115
(Note 1)
(Note 2)
(Note 3)
(Note 2)
(Note 2)
ns
#20
#285
#285
#46
#46
#46
Note 1
The BALL, STEEL ASSY (SERVICE) is supplied with the
certain grease applied to steel balls (Ref. No. 252).
When replacing steel balls, replace them the certain grease
applied.
certain grease applied to steel balls (Ref. No. 252).
When replacing steel balls, replace them the certain grease
applied.
BALL, STEEL ASSY (SERVICE) は STEEL BALL (Ref. No. 252) に
特定グリスが塗布された状態で供給されます。
特定グリスが塗布された状態で供給されます。
スチールボールを交換する際は，特定グリスが塗布されたまま
交換してください。
DSC-RX1RM2
4-23
Note 2
When replacing the M DIAL, the E DIAL or the STEEL BALL
(Ref. No. 274) apply the certain grease supplied with the
BALL, STEEL ASSY (SERVICE) and replace them.
(Ref. No. 274) apply the certain grease supplied with the
BALL, STEEL ASSY (SERVICE) and replace them.
M DIAL，E DIALまたはSTEEL BALL (Ref. No. 274) を交換する場
合は，BALL, STEEL ASSY (SERVICE) に含まれている特定グリスを
塗布して交換してください。
合は，BALL, STEEL ASSY (SERVICE) に含まれている特定グリスを
塗布して交換してください。
Note 3
When replacing the TOP INNER, apply the certain grease
supplied with the BALL, STEEL ASSY (SERVICE)
(A-1911-422-A) and replace the TOP INNER.
supplied with the BALL, STEEL ASSY (SERVICE)
(A-1911-422-A) and replace the TOP INNER.
TOP INNERを交換する場合は，BALL, STEEL ASSY (SERVICE)
(A-1911-422-A) に含まれている特定グリスを塗布して
交換してください。
(A-1911-422-A) に含まれている特定グリスを塗布して
交換してください。
Disassembly Places
[1]: #285 X 1
#285
Bottom View
[4]: #285 X 1
#285
Bottom View
[7]: #115 X 2
#115
Top View
DSC-RX1RM2
4-24
[8]: #46 X 1
#46
Back View
[9]: #46 X 2
#46
Back View
[12]: #20 X 2
#20
Bottom View
DSC-RX1RM2
4-25
Notes on Assembling the Cabinet (Front) Block Section-2
Installing the E Dial and M Dial
D Cut portion
D Cut portion
Apply the certain grease
M Dial Ball Springs
M Dial
Steel Balls
1. Apply the certain grease that comes with BALL, STEEL ASSY (SERVICE) (A-1911-422-A) to
the Steel Balls.
2. Install the two M Dial Ball Springs and the two Steel Balls, and then install the M Dial fitting it
with the D Cut portion. Then tighten a screw.
the Steel Balls.
2. Install the two M Dial Ball Springs and the two Steel Balls, and then install the M Dial fitting it
with the D Cut portion. Then tighten a screw.
D Cut portion
D Cut portion
E Dial Ball Spring
E Dial
Steel Ball
Apply the certain grease
3. Apply the certain grease that comes with BALL, STEEL ASSY (SERVICE) (A-1911-422-A) to
the Steel Ball.
4. Install the E Dial Ball Spring and the Steel Ball, and then install the E Dial fitting it with the D
Cut portion. Then tighten a screw.
the Steel Ball.
4. Install the E Dial Ball Spring and the Steel Ball, and then install the E Dial fitting it with the D
Cut portion. Then tighten a screw.
DSC-RX1RM2
4-26
Click on the first or last page to see other DSC-RX1RM2 (serv.man2) service manuals if exist.