DOWNLOAD Sony DSC-RX100M2 (serv.man2) Service Manual ↓ Size: 8.1 MB | Pages: 39 in PDF or view online for FREE

DSC-RX100M2_L2

1-14

Linear Guide Tube (B)

Cam Tube

CAV No.

Linear Guide Tube (B)

Installation
1. While matching the marks of the Linear Guide Tube (B) and the Cam Tube, assemble these parts.

2. Set the     Mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
3. Install the 2 Group Frame Block Assy at a position where the      Mark of the Linear Guide Tube (B) matches CAV No. of 
    the 2 Group Frame Block Assy.
4. Install the 3 Group Frame Block Assy at a position where the      Mark of the Linear Guide Tube (B) matches the hole of the 
    3 Group Frame Block Assy.

5. Set the     Mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
6. Match the Mark of the Cam Tube with the concave portion of the 1 Group Frame Block Assy.
7. Install the Cam Tube and the 1 Group Frame Block Assy, and turn the Cam Tube.

2 Group Frame Block Assy

3 Group Frame Block Assy

1 Group Frame 

Block Assy

Cam Tube

Cam Tube

Cam Tube

Linear Guide Tube (B)

Cam Tube

Linear Guide Tube (B)

Mark

Mark

Mark

Concave

portion

Mark

Hole

8.

9.

10. Turn the Cam Tube counterclockwise to the maximum extent.

11.

12. Check that the five Helicoids are engaged with the grooves.

Cam Tube

Straight Tube (A) 
Block Assy

Stationary Tube

Near the
Naruto Gear

Concave
portion

CAV No.

Straight Tube (A) 
Block Assy

Match CAV No. inside the Straight Tube (A) Block Assy with the concave portion position of the 1 Group 
Frame Block Assy.

Push the Straight Tube (A) Block Assy in the arrow direction with the Cam Tube turned clockwise to the 
maximum extent.

While matching the Helicoid near the     Mark with the groove near the Naruto Gear of the Stationary 
Tube, assemble the Stationary Tube.

Helicoid

Mark

DSC-RX100M2_L2

1-15

13. Install the Naruto Gear.
14. Turn the Naruto Gear in the arrow direction to extend the Lens Barrel to the center of TELE and WIDE.

15. Pull the Flexible Boards out of the Lens Barrel and fix the Flexible Boards with the Boss and the Ribs.
16. Turn the Naruto Gear in the arrow direction to return to the WIDE end.

17. Install the LF-155 Flexible Boards.
18. Connect the Flexible Boards to the connectors.

19. Install the Rear Tube Mirror Block.

Rear Tube Mirror Block

LF-155 Flexible Board

Naruto Gear

Naruto Gear

Flexible 
Boards

Boss

Rib

Rib

Rib

Naruto Gear

Hook

Boss

Connectors

Flexible 
Boards

Rib

Rib

Rear Tube Mirror Block

20. Connect the Flexible Board (Focus) to the connector.
21. Install the FPC Retainer and a screw.
22. Install the Zoom Gear Assy (1560).

Zoom Gear Assy (1560)

Screw

23. Install the Sensor.
24. Install five screws and the Z Retainer.

Screws

Screw

Z Retainer

Screw

Flexible Board (Focus)

Connector

FPC Retainer

Hook

Sensor

Rib

Boss

Rib

DSC-RX100M2_L2

1-16E

下図は当機種と本体の形状が異なります。

Note: As for the figure below, this model and the shape

of the main body are different.

Inspect it as follows when you exchange parts in the lens block.

Zoom motion (Check five postures: horizontal, upward/downward, upper/lower oblique 45º)
No abnormal sound or motion must be found over full stroke between TELE end and WIDE end.
Zoom image
No abnormality such as a skipped image or wavy image must be found in the image through LCD or finder over full stroke between
TELE end and WIDE end.
Barrier (Check five postures: horizontal, upward/downward, upper/lower oblique 45º)
The barrier must be opened and closed fully, free from a sticking in the midway.
No abnormal sound must be heard during the operation.
Appearance condition
Scratches or stains must not be noticeable, except that the customer permits them.
Foreign matters on the lens
The lens condition must not be worse than that when the camera was received from the customer.

Lens at TELE end

Lens at WIDE end

Upward

Downward

Horizontal

Full stroke check

1

2

3

4

5

Focus check
1

  Preparation

 

•  Camera installed re-assemble lens.

 

•  Chart (Printed PDF file at the same magnification) (Refer to <Reference>)

 • 

Tripod

 

•  Mirror (ex. CD)

 • 

Memory 

card

 • 

PC

2

  Shoot setting

 

(1)  Paste the chart.

 

•  Chart should be on the flat wall.

 

•  Illuminance level in the chart should be the same.

 

•  Make the tripod’s height and the center of the chart to the same height.

 

•  Enough space needed for shooting.

 

(2)  Set the camera.

 

•  Set [P] mode

 

•  Set [Maximum] size

 

•  Set ISO lowest level

 

•  Set Steady Shot [OFF]

 

•  Set Flash [OFF]

 

(3)  Set the camera on a tripod.

 

(4)  Adjust the position of the camera and the chart.

 

1. Set the zoom position of the camera at Wide end.

 

2. Attach the mirror onto the center of the chart.

 

    * The mirror should not tilt on the chart.

 

3. Set the camera to display the chart on LCD like in the following picture.

 

4. Adjust the camera position to the center of the chart.

 

    * Adjust the tripod height and the position (Lateral direction).

 

5. Adjust the camera angle to the frame of the chart with tripod.

 

    Remove the mirror.

3

  Shooting

      (1)  Set [Self-Timer]
      (2)  Shot
4

  Check the shot image.

      (1)  Check the shot image on PC.
 

100% Display (Display at the same magnification of its Pixel.)

 

Compare the image with the sample you set.

      No extreme focus blurring
      It should be distinguished the black and white by the sharpness between them.
      If it is in NG level, replace the lens unit.

<Reference>
•     How to Print the Chart
      Print “Focus-Chart_A3.pdf” with printer.
      Print at the same magnification (It means 100 % size).
      Check the settings of printer to print in proper size.
•     Check of chart size.
      Make charts together and check if the size of charts is the following size.
      * The chart consists of 2 pcs.

DSC-RX100M2_L2

2-1

Follow the disassembly in the numerical order given.

NOTE:
•  -XX, -X mean standardized parts, so they may have some differences from the 

original one.

•  Items marked “*” are not stocked since they are seldom required for routine service. 

Some delay should be anticipated when ordering these items.

•  The mechanical parts with no reference number in the exploded views are not 

supplied.

•  Due to standardization, replacements in the parts list may be different from the 

parts specified in the diagrams or the components used on the set.

• CAPACITORS:
 uF: 

μF

• COILS
 uH: 

μH

• RESISTORS
  All resistors are in ohms.
  METAL: metal-film resistor
  METAL OXIDE: Metal Oxide-film resistor
 F: 

nonflammable

• SEMICONDUCTORS
  In each case, u: μ, for example:
 uA...: 

μA... , uPA... , μPA... ,

 uPB... 

, 

μPB... , μPC... , μPC... ,

 uPD..., 

μPD...

The components identified by mark 0 or dotted line with 

mark 0 are critical for safety.

Replace only with part number specified.
Les composants identifiés par une marque 0 sont 

critiques pour la sécurité.
Ne les remplacer que par une pièce portant le numéro 
spécifié.

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.

注意

如果电池更换不当会有爆炸危险。
只能用同样类型或等效类型的电池来更换。
务必按照说明处置用完的电池。

•  Color Indication of Appearance Parts
 Example:
 

(SILVER) : Cabinet’s Color

 

(Silver)  : Parts Color

【使用上の注意】 

•  ここに記載されている部品は,  補修用部品であるため,  回路図及びセットに付い

ている部品と異なる場合があります。

•  -XX, -Xは標準化部品のため, セットに付いている部品と異なる場合があります。
•  *印の部品は常備在庫しておりません。

•  抵抗の単位Ωは省略してあります。
  金  被：金属被膜抵抗。
  サンキン：酸化金属被膜抵抗。
•   インダクタの単位でuHはμHを示します。
•   半導体の名称でuA..., uPA..., uPB..., uPC..., uPD...等はそれぞれμA..., μPA..., μPB..., 

μPC..., μPD...を示します。

0印の部品，または0印付の点線で囲まれた部品は，
安全性を維持するために，重要な部品です。
従って交換時は，必ず指定の部品を使用してください。

電池の交換は、正しく行わないと破裂する恐れがあり
ます。
電池を交換する場合には必ず同じ型名の電池又は同等
品と交換してください。
使用済み電池は、取扱指示に従って処分してください。

•  外装部品色表示
 

例：

 

(SILVER) ：セットの色を表す。

 

(Silver)  ：部品の色を表す。

• Abbreviation
  CH 

: Chinese model

  CND  : Canadian model
  HK 

: Hong Kong model

 IND : 

Indian 

model

  J 

: Japanese model

  KR 

: Korea model

 RU  : 

Russian 

model

  TW   : Taiwan model

Right View

Left View

Front View

Bottom View

Top View

Back View

• CD-847 Flexible Board
• SE-184 Flexible Board

• SH-1007 Flexible Board

• RL-1016 Flexible Board

• LC-1009 Flexible Board

• ST-1016 Board
• FL-217 Flexible Board

• BT-2007 Flexible Board

The changed portions from
Ver. 1.2 are shown in blue.