Sony DSC-P7 (serv.man3) Service Manual ▷ View online
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\01COV-DSCP7UC\010COV01.FM]
masterpage:Right
model name1[DSC-P7/P9]
[3-075-896-11(1)]
3-075-896-11(1)
Digital Still Camera
Operating Instructions
Before operating the unit, please read this manual thoroughly, and
retain it for future reference.
retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. DSC-P7/P9
Serial No.
DSC-P7/P9
© 2002 Sony Corporation
Getting started
_________________________
Shooting still images
___________________
Viewing still images
____________________
Deleting still images
____________________
Copying still images to your computer
__________
Before advanced operations
______________
Advanced still image shooting
_____________
Advanced still image viewing
______________
Still image editing ____________________
Enjoying movies
_________________________
Troubleshooting
_________________________
Additional information
____________________
Index
010COV01.FM Page 1 Thursday, May 23, 2002 3:52 PM
2
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\02WAR.FM]
masterpage:Left
model name1[DSC-P7/P9]
[3-075-896-11(1)]
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
not expose the unit to rain or
moisture.
Never expose the battery pack to temperature
above 60°C (140°F), such as in a car parked in
the sun or under direct sunlight.
above 60°C (140°F), such as in a car parked in
the sun or under direct sunlight.
If you have any questions about this product,
you may call:
you may call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
1-800-222-SONY (7669)
The number below is for the FCC related
matters only.
matters only.
Regulatory Information
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
WARNING
For the Customers in the U.S.A.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Declaration of Conformity
Trade Name:
SONY
Model No.:
DSC-P9
Responsible Party:Sony Electronics Inc.
Address:
Address:
680 Kinderkamack
Road, Oradell, NJ
07649 USA
Road, Oradell, NJ
07649 USA
Telephone No.:
201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Declaration of Conformity
Trade Name:
SONY
Model No.:
DSC-P7
Responsible Party:Sony Electronics Inc.
Address:
Address:
680 Kinderkamack
Road, Oradell, NJ
07649 USA
Road, Oradell, NJ
07649 USA
Telephone No.:
201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
01cov.book Page 2 Thursday, May 23, 2002 3:57 PM
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\02WAR.FM]
masterpage:Right
model name1[DSC-P7/P9]
[3-075-896-11(1)]
3
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
receiver is connected.
—Consult the dealer or an experienced
radio/TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
RECYCLING LITHIUM-ION
BATTERIES
BATTERIES
Lithium-Ion batteries are
recyclable.
You can help preserve our
environment by returning your
used rechargeable batteries to the
collection and recycling location nearest you.
recyclable.
You can help preserve our
environment by returning your
used rechargeable batteries to the
collection and recycling location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or visit
http://www.rbrc.org/
rechargeable batteries, call toll free
1-800-822-8837, or visit
http://www.rbrc.org/
Caution
: Do not handle damaged or leaking
Lithium-Ion batteries.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT
USE THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
USE THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
A moulded plug complying with BS 1363 is
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be
replaced, a 5 AMP fuse approved by ASTA or
BSI to BS 1362, (i.e., marked with
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be
replaced, a 5 AMP fuse approved by ASTA or
BSI to BS 1362, (i.e., marked with
or
mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact your
nearest Sony service station.
detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact your
nearest Sony service station.
Directive:EMC Directive 89/336/EEC,
92/31/EEC
This equipment complies with the EMC
regulations when used under the following
circumstances:
regulations when used under the following
circumstances:
•
Residential area
•
Business district
•
Light-industry district
(This equipment complies with the EMC
standard regulations EN55022 Class B.)
standard regulations EN55022 Class B.)
For the Customers in the U.S.A.
and Canada
and Canada
Notice on the supplied AC
power adaptor for the
customers in the United
Kingdom
power adaptor for the
customers in the United
Kingdom
For the Customers in Germany
01cov.book Page 3 Thursday, May 23, 2002 3:57 PM
4
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\02WAR.FM]
masterpage:Left
model name1[DSC-P7/P9]
[3-075-896-11(1)]
This product has been tested and found
compliant with the limits sets out on the EMC
Directive for using connection cables shorter
than 3 meters.
compliant with the limits sets out on the EMC
Directive for using connection cables shorter
than 3 meters.
The electromagnetic fields at the specific
frequencies may influence the picture and
sound of this digital camera.
frequencies may influence the picture and
sound of this digital camera.
Notice
If static electricity or electromagnetism causes
data transfer to discontinue midway (fail),
restart the application or disconnect and
connect the USB cable again.
data transfer to discontinue midway (fail),
restart the application or disconnect and
connect the USB cable again.
For the Customers in the U.S.A.
and Canada
and Canada
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
Trademarks
•
“Memory Stick,”
, “MagicGate Memory
Stick,” and
, are trademarks of Sony
Corporation.
•
“MagicGate” and
are
trademarks of Sony Corporation.
•
“InfoLITHIUM” is a trademark of Sony
Corporation.
Corporation.
•
Microsoft and Windows are registered
trademarks of the U.S. Microsoft Corporation
in the United States and other countries.
trademarks of the U.S. Microsoft Corporation
in the United States and other countries.
•
Macintosh, Mac OS, and QuickTime, are
trademarks or registered trademarks of Apple
Computer, Inc.
trademarks or registered trademarks of Apple
Computer, Inc.
•
In addition, system and product names used in
this manual are, in general, trademarks or
registered trademarks of their respective
developers or manufacturers. However, the
this manual are, in general, trademarks or
registered trademarks of their respective
developers or manufacturers. However, the
™
or ® marks are not used in all cases in this
manual.
manual.
Attention for the Customers in
Europe
Europe
“Memory Stick” and battery
pack
pack
N50
01cov.book Page 4 Thursday, May 23, 2002 3:57 PM
Click on the first or last page to see other DSC-P7 (serv.man3) service manuals if exist.