Sony DSC-P7 (serv.man3) Service Manual ▷ View online
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM]
masterpage:L1-Right
model name1[DSC-P7/P9]
[3-075-896-11(1)]
13
G
e
tt
in
g star
te
d
•
The battery life and the number of images
recordable are decreased under the following
conditions:
recordable are decreased under the following
conditions:
–
At low temperatures.
–
Using the flash.
–
Turning on and off frequently.
–
Using the zoom frequently.
–
When [POWER SAVE] is set to [OFF].
–
Using the battery pack used repeatedly or
self-discharged after charging (page 97).
self-discharged after charging (page 97).
The POWER SAVE function
When the POWER SAVE function is
activated, you can shoot for a longer
period of time.
Set the mode dial to SET UP, and set
[POWER SAVE] in [SETUP 2] to [ON].
The factory setting is [ON] (page 94).
activated, you can shoot for a longer
period of time.
Set the mode dial to SET UP, and set
[POWER SAVE] in [SETUP 2] to [ON].
The factory setting is [ON] (page 94).
When the POWER SAVE
function is activated
function is activated
•
The LCD screen will be darker than it is when
[POWER SAVE] is set to [OFF]. You cannot
change the settings for [LCD BACKLIGHT]
at this time (page 94).
[POWER SAVE] is set to [OFF]. You cannot
change the settings for [LCD BACKLIGHT]
at this time (page 94).
•
When the power turns on, the Flash mode is
normally set to “
normally set to “
” (No flash).
•
If you want to shoot using the flash, press v
( ) on the control button, and select “ ”
(Forced flash) or Auto (page 26).
( ) on the control button, and select “ ”
(Forced flash) or Auto (page 26).
•
When shooting sill images, the focus only
works while the shutter button is pressed
down halfway.
works while the shutter button is pressed
down halfway.
01cov.book Page 13 Thursday, May 23, 2002 3:57 PM
14
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM]
model name1[DSC-P7/P9]
[3-075-896-11(1)]
masterpage:L1-Left-01
Using an external power source
,
Open the jack cover, and
connect the AC-LS1A AC
power adaptor (supplied) to the
DC IN jack of the camera.
connect the AC-LS1A AC
power adaptor (supplied) to the
DC IN jack of the camera.
Connect the plug with the v mark facing
up.
up.
•
Connect the AC power adaptor to an easily
accessible wall outlet (wall socket) close by. If
something goes wrong while you are using the
adaptor, immediately shut off the power by
pulling the plug out of the wall outlet.
accessible wall outlet (wall socket) close by. If
something goes wrong while you are using the
adaptor, immediately shut off the power by
pulling the plug out of the wall outlet.
1
Jack cover
AC power adaptor
DC plug
,
Connect the power cord (mains
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
•
When you have finished using the AC power
adaptor, disconnect it from the DC IN jack of
the camera.
adaptor, disconnect it from the DC IN jack of
the camera.
•
The set is not disconnected from the AC power
source as long as it is connected to the wall
outlet (wall socket) even if the set itself has
been turned off.
source as long as it is connected to the wall
outlet (wall socket) even if the set itself has
been turned off.
2
2
To a wall outlet
(wall socket)
Power cord
(mains lead)
(mains lead)
1
Using your camera
abroad
abroad
Power sources
You can use your camera in any country or
area with the supplied AC power adaptor
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
area with the supplied AC power adaptor
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
[a]
, if necessary, depending on the design of
the wall outlet (wall socket)
[b]
.
•
Do not use an electrical transformer. Using this
may cause a malfunction.
may cause a malfunction.
AC-LS1A
01cov.book Page 14 Thursday, May 23, 2002 3:57 PM
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM]
masterpage:L1-Right-01
model name1[DSC-P7/P9]
[3-075-896-11(1)]
15
G
e
tt
in
g star
te
d
Turning on/off your camera
,
Press POWER to turn on the
power.
power.
The POWER lamp lights in green, the
power is on. When you turn on your camera
for the first time, the CLOCK SET screen
appears (see the next page).
power is on. When you turn on your camera
for the first time, the CLOCK SET screen
appears (see the next page).
To turn off the power
Press POWER again, the POWER lamp
goes out, and the camera turns off.
goes out, and the camera turns off.
•
If you turn the power on when the mode dial is
set to SCN,
set to SCN,
, or
the lens comes out.
Please be careful not to touch the lens portion.
POWER
ON/OFF(CHG)
POWER
POWER lamp
The Auto Power Off
function
function
If no tasks are performed for a while
*
when shooting, viewing images, or
setting up the camera while using the
battery pack, power is automatically
shut off to preserve battery power.
However, in the following
circumstances, even if the battery pack
is being used to power the camera, the
Auto Power Off function will not work.
• Movies are being played back
• A slide show is being played back
• A cable is connected to the USB jack
setting up the camera while using the
battery pack, power is automatically
shut off to preserve battery power.
However, in the following
circumstances, even if the battery pack
is being used to power the camera, the
Auto Power Off function will not work.
• Movies are being played back
• A slide show is being played back
• A cable is connected to the USB jack
or the A/V OUT (MONO) jack
*
When [POWER SAVE] is set to [ON]:
approximately 90 seconds
When [POWER SAVE] is set to [OFF]:
approximately three minutes
approximately 90 seconds
When [POWER SAVE] is set to [OFF]:
approximately three minutes
How to use the
control button
control button
To change the current settings of the
camera, bring up the menu or the SET UP
screen (page 52), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired setting item, then press the center z
or b/B to make the setting.
camera, bring up the menu or the SET UP
screen (page 52), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired setting item, then press the center z
or b/B to make the setting.
WHITE BAL
AUTO
ISO
WB
EV
ISO
0EV
0EV
01cov.book Page 15 Thursday, May 23, 2002 3:57 PM
16
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM]
masterpage:Left
model name1[DSC-P7/P9]
[3-075-896-11(1)]
Setting the date and time
,
Set the mode dial to
.
•
You can also carry out this operation when the
mode dial is set to SCN,
mode dial is set to SCN,
, or
.
•
To change values for the time and the date that
have been previously set, set the mode dial to
SET UP, select [CLOCK SET] in [SETUP 1]
(page 93), then proceed from Step 3.
have been previously set, set the mode dial to
SET UP, select [CLOCK SET] in [SETUP 1]
(page 93), then proceed from Step 3.
,
Press POWER.
The POWER lamp lights in green and the
CLOCK SET screen appears.
CLOCK SET screen appears.
,
Select the desired order for the
date, the month and the year
using
date, the month and the year
using
v
/
V
on the control
button, then press the center
z
.
You can select from [Y/M/D] (year/month/
day), [M/D/Y], and [D/M/Y].
day), [M/D/Y], and [D/M/Y].
•
If the rechargeable button battery, which
provides the power for saving the time data,
ever loses its charge (page 95), the CLOCK
SET screen automatically reappears. If this
happens, reset the date and time by following
the above procedure, starting from Step 3.
provides the power for saving the time data,
ever loses its charge (page 95), the CLOCK
SET screen automatically reappears. If this
happens, reset the date and time by following
the above procedure, starting from Step 3.
1
Mode dial
D/M/Y
O K
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
POWER
ON/OFF(CHG)
2
POWER
3
D/M/Y
O K
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
01cov.book Page 16 Thursday, May 23, 2002 3:57 PM
Click on the first or last page to see other DSC-P7 (serv.man3) service manuals if exist.