Sony DSC-P32 (serv.man3) Service Manual ▷ View online
66
To delete shot images
When using this mode, you cannot delete
only certain frames. When you delete
images, all 16 of the frames are deleted at
the same time.
only certain frames. When you delete
images, all 16 of the frames are deleted at
the same time.
1
Display the Multi Burst image you want
to delete.
to delete.
2
Press
(Delete).
3
Select [Delete], then press z.
All of the frames are deleted.
All of the frames are deleted.
67
S
till ima
g
e
e
d
iti
n
g
Protecting images
– Protect
Mode selector:
To prevent accidental erasure of an
important image, you can protect it.
important image, you can protect it.
On the single screen
a
Set the mode selector to
.
b
Display the image you want to
protect with
protect with
b
/
B
.
c
Press MENU.
The menu appears.
d
Select [Protect] with
b
/
B
, then
press
z
.
The image currently being displayed is
now protected, and the - (Protect)
mark is indicated on the screen.
now protected, and the - (Protect)
mark is indicated on the screen.
e
To protect other images,
display the image you want to
protect with
display the image you want to
protect with
b
/
B
, then press
z
.
To cancel the protection
In Step 4 or 5, press z again. The -
mark disappears.
mark disappears.
On the Index (nine-image)
screen
screen
a
Set the mode selector to
,
press the zoom W (index)
button once to switch to the
Index (nine-image) screen.
button once to switch to the
Index (nine-image) screen.
b
Press MENU.
The menu appears.
c
Select [Protect] with
b
/
B
, then
press
z
.
d
Select [Select] with
b
/
B
, then
press
z
.
e
Select the image you want to
protect with
protect with
v
/
V
/
b
/
B
, then
press
z
.
The green - (Protect) mark is
indicated on the selected image.
indicated on the selected image.
f
To protect other images,
repeat Step
repeat Step
5
.
g
Press MENU.
Mode selector
Zoom buttons
Control button
MENU
VGA
101
2/9
OK
BACK/NEXT
Protect
Exit
TO NEXT
MENU
MOVE
SELECT
Still image editing
68
h
Select [OK] with
B
, then press
z
.
The - mark turns white and the
selected image is protected.
selected image is protected.
To cancel the protection
In Step 4, select [Cancel], or in Step 8,
select [Exit].
select [Exit].
To release protection
In Step 5, select an image for which you
want to release protection with v/V/b/B,
and press z. The - mark turns gray and
repeat this operation for all the images for
which you want to release protection. Then,
press MENU, select [OK], and press z.
want to release protection with v/V/b/B,
and press z. The - mark turns gray and
repeat this operation for all the images for
which you want to release protection. Then,
press MENU, select [OK], and press z.
To protect all the images in
folder
folder
In Step 4, select [All In Folder], then press
z. Next, select [On], then press z.
z. Next, select [On], then press z.
To release protection of all the
images in the folder
images in the folder
In Step 4, select [All In Folder], and press
z. Then select [Off], and press z.
z. Then select [Off], and press z.
On the Index (triple-image)
screen
screen
a
Set the mode selector to
,
press the zoom W (index)
button twice to switch to the
Index (triple-image) screen.
button twice to switch to the
Index (triple-image) screen.
b
Move the image you want to
protect to the center with
protect to the center with
b
/
B
.
c
Press MENU.
The menu appears.
d
Select [Protect] with
v
/
V
, then
press
z
.
The center image is protected, and the
-
-
(Protect) mark is indicated on that
image.
e
To protect other images, move
the image you want to protect
to the center with
the image you want to protect
to the center with
b
/
B
, and
repeat Step
4
.
To release protection
In Step 4, select the image from which
you want to release protection, and press z.
To release protection from all of your
images, repeat this process for each of them.
you want to release protection, and press z.
To release protection from all of your
images, repeat this process for each of them.
10:30
PM
2003 7 4
101-0002
Protect
DPOF
Folder
BACK/NEXT
OK
69
S
till ima
g
e
e
d
iti
n
g
Changing image size
– Resize
Mode selector:
You can change the image size of a
recorded image, and save it as a new file.
You can resize to the following sizes.
3.1M, 2.0M, 1.2M, and VGA.
The original image is retained even after
resizing.
recorded image, and save it as a new file.
You can resize to the following sizes.
3.1M, 2.0M, 1.2M, and VGA.
The original image is retained even after
resizing.
a
Set the mode selector to
.
b
Display the image you want to
resize with
resize with
b
/
B
.
c
Press MENU.
The menu appears.
d
Select [Resize] with
b
/
B
, then
press
z
.
e
Select the new size with
v
/
V
,
then press
z
.
The resized image is recorded in the
recording folder as the newest file.
recording folder as the newest file.
To cancel the resizing
In Step 5, select [Cancel].
•
Movies (MPEG movie), or images recorded in
Clip Motion/Multi Burst modes cannot be
resized.
Clip Motion/Multi Burst modes cannot be
resized.
•
When images are resized from a smaller to a
larger size, the image quality will deteriorate.
larger size, the image quality will deteriorate.
•
You cannot resize to 3:2-sized image.
•
If you try to resize a 3:2-sized image, black
bands will appear at the top and bottom of the
image.
bands will appear at the top and bottom of the
image.
Mode selector
Control button
MENU
Click on the first or last page to see other DSC-P32 (serv.man3) service manuals if exist.