DOWNLOAD Sony DSC-P10 / DSC-P12 Service Manual ↓ Size: 4.14 MB | Pages: 31 in PDF or view online for FREE

Photo: DSC-P10

US Model

Canadian Model

DSC-P10

AEP Model

UK Model

DSC-P10/P12

E Model

Hong Kong Model

Australian Model

Chinese Model

Korea Model

Tourist Model

Japanese Model

DSC-P10

1. SERVICE NOTE

2. DISASSEMBLY

3. BLOCK DIAGRAMS

OVERALL

POWER

4. PRINTED WIRING BOARDS AND

CD-434, SW-386, ST-81,

SCHEMATIC DIAGRAMS

MS-130

5. REPAIR PARTS LIST

EXPLODED VIEWS

ELECTRICAL PARTS LIST

• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987622751.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987622741.pdf).
• This service manual contains information for Japanese model as well.

• Reference No. search on printed wiring boards is available.

— 2 —

4-2.

Schematic Diagrams ························································ 4-5
SY-83 (1/10) (CAMERA MODULE) ····························· 4-9
SY-83 (2/10) (CAMERA DSP, 256M SDRAM) ··········· 4-11
SY-83 (3/10) (VIDEO AMP) ········································· 4-13
SY-83 (4/10) (LENS DRIVE) ······································· 4-15
SY-83 (5/10) (SH DSP, 16M FLASH) ·························· 4-17
SY-83 (6/10) (MEMORY, CLOCK GENERATOR) ····· 4-19
SY-83 (7/10) (FRONT CONTROL) ······························ 4-21
SY-83 (8/10) (AUDIO) ·················································· 4-23
SY-83 (9/10) (FLASH CONTROL) ······························ 4-25
SY-83 (10/10) (DC/DC CONVERTER) ························ 4-27
JK-243 (JACK) ······························································ 4-35
JK-244 (JACK) ······························································ 4-36

4-3.

Printed Wiring Boards ··················································· 4-39
SY-83 ············································································· 4-43
JK-243 ··········································································· 4-51
JK-244 ··········································································· 4-51

4-4.

Waveforms ····································································· 4-55

4-5.

Mounted Parts Location ················································ 4-58

5-2.

Electrical Parts List ························································· 5-6

Section

Title

Page

4-5

(For schematic diagrams)
• All capacitors are in 

µ

F unless otherwise noted. pF : 

µ

µ

F.  50 V or less are not indicated except for electrolytics

and tantalums.

• Chip resistors are 1/10 W unless otherwise noted.

k

Ω

=1000 

Ω

, M

Ω

=1000 k

Ω

.

• Caution when replacing chip parts.

New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum
capacitor, Because it is damaged by the heat.

• Some chip part will be indicated as follows.

Example

C541

L452

22U

10UH

TA  A

2520

• Constants of resistors, capacitors, ICs and etc with XX

indicate that they are not used.
In such cases, the unused circuits may be indicated.

• Parts with 

★

 differ according to the model/destination.

Refer to the mount table for each function.

• All variable and adjustable resistors have characteristic

curve B, unless otherwise noted.

• Signal name

XEDIT

→ 

EDIT

PB/XREC 

→

 PB/REC

•

2

: non flammable resistor

•

5

: fusible resistor

•

C

: panel designation

•

A

: B+ Line

•

B

: B– Line

•

J

: IN/OUT direction of (+,–) B LINE.

•

C

: adjustment for repair.

•

A

: VIDEO SIGNAL (ANALOG)

•

A

: AUDIO SIGNAL (ANALOG)

•

A

: VIDEO/AUDIO SIGNAL

•

A

: VIDEO/AUDIO/SERVO SIGNAL

•

A

: SERVO SIGNAL

• Circled numbers refer to waveforms.
(Measuring conditions voltage and waveform)

• Voltages and waveforms are measured between the

measurement points and ground when camera shoots
color bar chart of pattern box.  They are reference values
and reference waveforms.
(VOM of DC 10 M

Ω

 input impedance is used)

• Voltage values change depending upon input

impedance of VOM used.)

1. Connection

2. Adjust the distance so that the output waveform of

Fig. a and the Fig. b can be obtain.

When indicating parts by reference number, please
include the board name.

Kinds of capacitor

External dimensions (mm)

Les composants identifiés par une marque

0

 sont critiques pour la sécurité.

Ne les remplacer que par une pièce portant
le numéro spécifie.

The components identified by mark 

0

  or

dotted line with mark 

0

 are critical for safety.

Replace only with part number specified.

Fig.b (Picture on monitor TV)

H

A=B/2

A

B

B

A

Y

ellow

Cyan

Green

White

Magenta

Red

Blue

Fig. a (Video output terminal output waveform)

CRT picture frame

Electronic beam
scanning frame

Case Size

Front of the lens

Pattern box

L

L = About 25 cm