Sony DSC-P10 / DSC-P12 (serv.man4) Service Manual ▷ View online
DSC-P10/P12
6-3
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-8
J-9
Name
Filter for color temperature correction (C14)
Pattern box PTB-450
Color bar chart for pattern box
Siemens star chart
Clear chart for pattern box
Minipattern box
Parts Code
J-6080-058-A
J-6082-200-A
J-6020-250-A
J-6080-875-A
J-6080-621-A
J-6082-353-B
Usage
Auto white balance adjustment/check
White
White
OS: Windows 98/98SE/Me/2000/XP Home/XP Pro
USB connector
USB connector
× 2
HASP key and application for adjustment
(SEUS)
(SEUS)
balance adjustment/check
For checking the flange back
J-6
J-7
Personal computer
USB cable
1-823-932-11
For connecting the camera to PC
Contact our service headquater of each area how to get
the application for adjustment (SEUS) and HASP key
the application for adjustment (SEUS) and HASP key
For adjusting the flange back
J-10
Back ground paper
J-2501-130-A For adjusting the strobe
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
• Regulated power supply
• Digital voltmeter
• Calculating machine capable of calculating hexadecimal numbers.
Fig. 6-1-1
J-1
J-5
J-2
J-6
J-7
J-3
J-4
J-8
J-9
COVER
COVER
J-10
and application for
adjustment (SEUS)
DSC-P10/P12
6-4
Fig. 6-1-3
1-1-2.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-3.
2) Start up the application for adjustment (SEUS).
2) Start up the application for adjustment (SEUS).
Note 1:
Setting the “Forced CAMERA mode power ON Mode”
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 21, and write data 03.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 21, and write data 03.
The above procedure will enable the camera power
to be turned on. After completing adjustments, be
sure to exit the “Forced CAMERA mode power ON
Mode”.
to be turned on. After completing adjustments, be
sure to exit the “Forced CAMERA mode power ON
Mode”.
Note 2:
Exiting the “Forced CAMERA mode power ON Mode”
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 21, and write data: 00.
3) Select page: 00, address: 01, and set data: 00.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 21, and write data: 00.
3) Select page: 00, address: 01, and set data: 00.
Fig. 6-1-2
Front of the lens
Pattern box
L
L = About 25 cm
DSC-P10/P12
HASP Key
Insert the Memory Stick
and the Batteries
and the Batteries
*.
To USB connector
To USB connector
To USB connector
USB cable
(1-823-932-11)
PC
with USB connectors (x 2)
(Windows 98/98SE/ME/2000/XP)
LOCK
Audio (Black)
Video (yellow)
Color monitor
Vectorscope
Terminated
75
Ω
To A/V OUT
jack
AC IN
AC power adaptor
To DC IN jack
DSC-P10/P12
6-5
Fig. 6-1-5
1 k
Ω
/1 W
Wrap insulating tape.
Fig. 6-1-4
R:1 k
Ω
/1 W
(Part code:
1-215-869-11)
1-215-869-11)
Capacitor
ST
-81
1-1-3.
Discharging of the Flashlight Power Supply
The capacitor which is used as power supply of flashlight is charged
with 200 V to 300 V voltage. Discharge this voltage before start-
ing adjustments in order to protect service engineers from electric
shock during adjustment.
with 200 V to 300 V voltage. Discharge this voltage before start-
ing adjustments in order to protect service engineers from electric
shock during adjustment.
Discharge procedure
1. Press the FLASH button (SW-386 board S004 (CONTROL
1. Press the FLASH button (SW-386 board S004 (CONTROL
UP)) and set the NO FLASH mode.
2. Fabricate the discharging jig as shown in Fig. 6-1-5 locally by
yourself. Connect the discharging jig to the positive (+) and
negative (–) terminal of the flash voltage charge capacitor. Al-
low ten seconds to discharge the voltage.
negative (–) terminal of the flash voltage charge capacitor. Al-
low ten seconds to discharge the voltage.
DSC-P10/P12
6-6
1-1-4.
Precautions
1.
Setting the Switch
Unless otherwise specified, set the switches as follows and per-
form adjustments.
1. Mode Dial .......................................... CAMERA
2. ZOOM switch
form adjustments.
1. Mode Dial .......................................... CAMERA
2. ZOOM switch
(SW-386 board S001, S002) .............. WIDE end
3. EV (Menu display) ............................ 0EV
4. DISPLAY/LCD ON/OFF button
4. DISPLAY/LCD ON/OFF button
(SW-386 board S005) ........................ OSD OFF
5. WB (WHITE BALANCE)
(Menu display) ................................... AUTO
6. P.EFFECT (Menu display) ................ OFF
7. VIDEO OUT (SET UP setting) ......... NTSC
7. VIDEO OUT (SET UP setting) ......... NTSC
2.
Order of Adjustments
Basically carry out adjustments in the order given.
3.
Subjects
1) Color bar chart (Standard picture frame).
When performing adjustments using the color bar chart, ad-
just the picture frame as shown in Fig. 6-1-6. (Standard pic-
ture frame)
just the picture frame as shown in Fig. 6-1-6. (Standard pic-
ture frame)
2) Clear chart (Standard picture frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations dur-
ing this time)
clear chart in its place. (Do not perform zoom operations dur-
ing this time)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig a
and the monitor TV display shown in Fig. b.
obtain the output waveform shown in Fig a
and the monitor TV display shown in Fig. b.
Fig. 6-1-6
H
A=B/2
A
B
B
A
Enlargement
V
C=D
Electronic beam scanning frame
Fig. b (monitor TV picture)
CRT picture frame
B
A
Difference in level
Ye
llow
Cyan
Green
White
Magenta
Red
Blue
D
C
Ye
llow
Cyan
Green
White
Magenta
Red
Blue
Fig. a
(VIDEO terminal of A/V jack
output waveform)
(VIDEO terminal of A/V jack
output waveform)
Color bar chart (Standard picture frame)
Click on the first or last page to see other DSC-P10 / DSC-P12 (serv.man4) service manuals if exist.