Sony DSC-HX400 / DSC-HX400V Service Manual ▷ View online
DSC-HX400/HX400V
4-9
(4) Notes on Installing the PR-1006 Board
Pins
PR-1006 Board
Lever
MF Slide
MF Ring
Assy
PR-1006 Board
Lever
MF Ground Plate
Pins
Groove
Insert the MF Ground Plate to these portions
Groove
DSC-HX400/HX400V
4-10
4-4. LENS BLOCK
4-4-1. Ornamental Plate Replacing Method
Removal
(1) Pour a solvent such as alcohol from four places A to the tweezers or a needle shown below into a gap of Ornamental Plate.
(2) Remove the Ornamental Plate.
(1) Pour a solvent such as alcohol from four places A to the tweezers or a needle shown below into a gap of Ornamental Plate.
(2) Remove the Ornamental Plate.
Tweezers
A
A
Ornamental Plate
Solvent
(3) Remove the three screws to detach the Filter Screw Frame Assy.
Filter Screw Frame Assy
Installation
(1) Match the boss of the Filter Screw Frame Assy with the concave of the 1st Frame Assy, install the Filter Screw Frame Assy, and then tighten
(1) Match the boss of the Filter Screw Frame Assy with the concave of the 1st Frame Assy, install the Filter Screw Frame Assy, and then tighten
three screws.
Filter Screw Frame Assy
1st Frame Assy
Concave
Boss
(2) Peel off the release paper of the Ornamental Plate and stick the Ornamental Plate matching the boss of the Ornamental Plate with the screw
A position.
Ornamental Plate
Screw A position
Boss
DSC-HX400/HX400V
4-11
4-4-2. 2nd Assy Replacing Method
Removal
(1) Peel off the Polyester Tape.
(2) Unsolder the Main Flexible Board and the Shutter Flexible Board.
(1) Peel off the Polyester Tape.
(2) Unsolder the Main Flexible Board and the Shutter Flexible Board.
Shutter Flexible Board
Main Flexible Board
Solders
Polyester Tape
(3) Peel off the Shutter Flexible Board.
Adhesive Tape
Shutter Flexible Board
Main Flexible Board
(4) Disconnect the 5th Assy Flexible Board from the connector on the Main Flexible Board.
Main Flexible Board
5th Assy
Flexible Board
Flexible Board
DSC-HX400/HX400V
4-12
(5) Peel the Main Flexible Board off the Fixed Stationary Tube Assy.
Adhesive Tapes
Fixed Stationary Tube Assy
Main Flexible Board
(6) Remove the three screws to detach the Z Motor.
(7) Disconnect the Vibration Absorption Flexible Board from the connector on the Main Flexible Board.
(8) Peel the Main Flexible Board off the Fixed Stationary Tube Assy.
(7) Disconnect the Vibration Absorption Flexible Board from the connector on the Main Flexible Board.
(8) Peel the Main Flexible Board off the Fixed Stationary Tube Assy.
Fixed Stationary
Tube Assy
Tube Assy
Main Flexible
Board
Board
Vibration Absorption
Flexible Board
Flexible Board
Adhesive Tape
Z Motor
(9) Remove the six screws to detach the Rear Mirror Assy.
Rear Mirror Assy
Click on the first or last page to see other DSC-HX400 / DSC-HX400V service manuals if exist.