Sony DSC-H9 (serv.man3) Service Manual ▷ View online
6-3
DSC-H9_ADJ
1-1. ITENS DOS AJUSTES QUANDO TROCAR AS PLACAS E PRINCIPAIS PEÇAS
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Wide Limit Adjustment”. Perform it manually.
Note 2:
When replacing the SY-177 board, erase the data in internal memory of the board before replacement.
Table 6-1-1
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD901 (H9), LCD902 (H7) LCD unit
D002 (AF illumination LED)
IC301 (Timing gen., CCD signal process)
IC602 (Audio, Video amp.)
SE501, SE502 (PITCH, YAW sensor)
(COMPLETE)
(COMPLETE) (Note 2)
Lens block
CCD block assy (Including CD-703 flexible board and CCD imager)
Flash unit
LCD block
PW-134 board
SY-177 board
SY-177 board
SY-177 board
DD-272 board
SY-177 board
Destination Data Write
Destination data write
z
USB Serial No. Input
USB serial No. input
z
Composite video level adj.
z
z
Component out Y level adj.
Component out Pb level adj.
Component out Pr level adj.
CAMERA adjustment 1
Hall adj.
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 2
Flange back adj.
z
z
z
CAMERA adjustment 3
Flange back check
z
z
z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 5
Strobe adj.
z
z
z
z
z
CAMERA adjustment 6
Auto focus illumination check
z
z
CAMERA adjustment 7
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
z
LCD adjustment
z
CAMERA adjustment 4
z
z
z
z
VIDEO adjustment
z
z
6-4
DSC-H9_ADJ
Personal computer
(Note 1)
(Note 1)
J-1
J-11
J-10
J-8
HASP key and application
for adjustment (SeusEX)
for adjustment (SeusEX)
Contact our service headquater of each area
how to get the application for adjustment
(SeusEX) and HASP key.
how to get the application for adjustment
(SeusEX) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-5
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-7
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Back ground paper
J-2501-130-A
J-2501-130-A
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6082-562-A
J-6
USB, A/V, DC IN cable
for multi-use terminal
1-830-848-21
for multi-use terminal
1-830-848-21
J-3
J-9
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
AC power adaptor
AC-LS5
1-479-284-51
AC-LS5
1-479-284-51
J-12
USB cable
1-829-868-41
1-829-868-41
J-4
360 mm
155 mm
280 mm
woody boad A
woody boad A
9 colors chart
135 mm
Fig. 6-1-1
1-2. Lista de ferramentas de serviço
•
Oscilloscope
•
Color monitor
Note 1:
Personal computer
OS:
OS:
Windows98/98SE/Me/2000/XP Home/XP Pro
RAM: 256 MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Note 2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it matches
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
6-5
DSC-H9_ADJ
J-13
Component
video out jig
J-6082-659-A
video out jig
J-6082-659-A
J-14
Camera table
J-6082-384-A
J-6082-384-A
Fig. 6-1-2
6-6
DSC-H9_ADJ
Fig. 6-1-4
Note:
The set must be connected to the Component video out jig when performing the “Component out (Y, Pb, Pr) level adjustment” of
the “Video System Adjustment”.
the “Video System Adjustment”.
6-1. AJUSTES DE SEÇÃO DA CAMERA
1-1. PREPARAÇÕES ANTES DO AJUSTE
1-1-1. PREPARAÇÕES
1) Connect the equipment for adjustments according to Fig. 6-1-4.
2) Start up the application for adjustment (SeusEX).
2) Start up the application for adjustment (SeusEX).
Fig. 6-1-3
Pattern box
Front of the lens
L = About 9 cm
L
Camera
PC
(The SeusEX must be installed in the PC.)
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Audio
(Black)
(Black)
Video
(yellow)
(yellow)
Color monitor
Video system Adjustment
(Composite video level adj.)
(Composite video level adj.)
Osilloscope
Terminated
75
75
Ω
AC IN
AC power adaptor
AC-LS5
(1-479-284-51)
AC-LS5
(1-479-284-51)
USB, A/V, DC IN cable
for multi-use terminal
(1-830-848-21)
for multi-use terminal
(1-830-848-21)
HASP Key
To DC IN jack
To USB
connector
connector
DISP SEL switch setting
TV: Video/Camera
System Adjustment
System Adjustment
CAMERA: LCD/Control
System Adjustment
System Adjustment
To Multi connector
•
Connecting the Equipment
Click on the first or last page to see other DSC-H9 (serv.man3) service manuals if exist.