DOWNLOAD Sony DSC-H3 (serv.man4) Service Manual ↓ Size: 884.94 KB | Pages: 41 in PDF or view online for FREE

6-8

DSC-H3_ADJ

Transparent window

A

B

A

C

B

C

C14: Filter for AWB 5800K adjustment

A

2

Effective picture frame

C14

Blue

Magenta

Red

White

Cyan

Green

Yellow

W14

Fig. a

LCD screen or under scan

monitor TV picture

A = B

C =

3

B

(                                    )

1) 9 colors chart (Standard picture frame).

When performing adjustments using the 9 colors chart, adjust
the picture frame as shown in Fig. 6-1-6. (Standard picture
frame)

2) Clear chart (Standard picture frame)

Remove the 9 colors chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations dur-
ing this time)

Unless otherwise specified, set the switches as follows and perform adjustments.
1. Mode dial ...................................................................... Auto Adjustment
2. ZOOM button ................................................................ WIDE end
3. Digital Zoom

(Settings – Shooting Settings – Shooting Settings 1) .... Off

4. Conversion Lens

(Settings – Shooting Settings – Shooting Settings 1) .... Off

Adjust the camera position and direction
to obtain the LCD screen or the monitor
TV display shown in Fig. a.

6-9

DSC-H3_ADJ

A dark room is required to provide an accurate flash adjustment.
If it is not available, prepare the flash adjustment box as given
below;

1) Provide woody board A, B and C of 15 mm thickness.

2) Apply black mat paint to one side of woody board A and B.
3) Attach background paper (J-2501-130-A) to woody board C.
4) Assemble so that the black sides and the background paper

side of woody board A, B and C are internal. (Fig. 6-1-8)

woody board A (2)

400 mm

woody board B (2)

370 mm

woody board C (1)

700 mm

513 mm

513 mm

700 mm

700 mm

730 mm

woody board A

woody board B

woody board B

woody board C

woody board A

Flash adjustment box

Front of the lens

Background paper

L = 50cm

L

Camera

6-10

DSC-H3_ADJ

When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-10 will appear. On this screen, select each ad-
justment section.

1

[Connecting the Equipment] button
A connection diagram of the equipment is displayed.

2

[CONNECT] button
The mode of Camera is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 – 0 is enabled.

3

[END] button
The mode of Camera is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.

4

[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.

5

[USB SERIAL No. INPUT] button
The “USB SERIAL No. INPUT” screen appears.

6

[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.

7

[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.

8

[LCD SYSTEM ADJUSTMENT] button
The “LCD SYSTEM ADJUSTMENT” screen appears.

9

[SERVICE MODE] button
The “SERVICE MODE” screen appears.

q;

[DATA BACKUP] button
The “DATA BACKUP” screen appears.

qa

This part indicates the version of Automatic Adjustment Pro-
gram.

The DSC-H3 is adjusted by the Automatic Adjustment Program.
The Automatic Adjustment Program enters automatically via the
SeusEX the adjustment operations that were formerly entered
manually by the adjustment remote commander (some items may
be adjusted by manual operation on the operation screen of the
SeusEX).

1) The Automatic Adjustment Program writes the adjustment re-

sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusEX. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusEX operates.

2) The Automatic Adjustment Program cannot be used when the

SEUS or the SeusCam is running. Exit the SEUS or the
SeusCam before using the Automatic Adjustment Program.

3) The SeusEX must be already started on the PC when using the

Automatic Adjustment Program. With the SeusEX not started,
some adjustment items will take time in adjustment.

4) The program run time may vary depending on the environ-

ment of the personal computer used.

Double-click the application file (DSC-H3 Auto-Adj
Ver_1.3r04.exe), and the Automatic Adjustment Program will start.

3

5

4

7

6

2

1

9

0

8

qa

6-11

DSC-H3_ADJ

Before performing the adjustment, “Setting of Adjustment Mode”
is required.

[Setting method]
1) Connect the Camera to the PC with a USB cable, and turn on

the power switch.

2) Start the Automatic Adjustment Program, and click the [Con-

nect] button on the Main Menu screen.

3) When the following message is displayed, turn off and on again

the power switch of the Camera.
Note: Turning off and on the power switch causes the Cam

era to be switched to the Adjustment Mode. After the
Camera restarted, click the [OK] button in the message
window.

4) Upon successful completion of the settings in the Adjustment

Mode, the operation of each button on the Main Menu screen
is enabled.

To finish the adjustment, be sure to perform “Release of Adjust-
ment Mode”.

[Releasing method]
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-

ment mode has completed. Click the [OK] button in the mes-
sage window to exit the Automatic Adjustment Program.
Note: The Camera switches to the normal mode by turning

off and on the power switch. After the adjustment fin-
ished, turn off and on again the power switch of the
Camera to confirm that the USB mode screen is dis-
played.