Sony DSC-H3 (serv.man4) Service Manual ▷ View online
6-12
DSC-H3_ADJ
1-3.
DESTINATION DATA WRITE
Note: The DESTINATION DATA WRITE cannot be set with other
than the Service board.
1.
Function of Each Button on Destination Data Write
Screen
Screen
Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-11 will appear.
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-11 will appear.
Fig. 6-1-11
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Destination List
Select the written destination.
Select the written destination.
3
[Data Write] button
Write the destination data to the camera.
Write the destination data to the camera.
2.
Destination Data Write
[Writing method]
1) Select the target destination from the pulldown list.
1) Select the target destination from the pulldown list.
2) Click the [Data Write] button.
3) Following message will be appeared after completing data
writing.
3
2
1
Table 6-1-2
Japanese
English
French
German
Spanish
Italian
Portuguese
Simplified
Chinese
Traditional
Chinese
Dutch
Russian
Korean
Persian
Arabic
Thai
Melayu
Swedish
Norwegian
Danish
Finnish
Polish
Czech
Hungarian
Turkish
Greek
J1
J
z
NTSC
JE3
JE
z
a
a
a
a
a
a
a
a
a
PAL
U2
US
z
a
a
a
a
a
NTSC
CA2
CND
z
a
a
a
a
a
NTSC
CEE2
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
PAL
CEE8
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEE9
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
E15
z
a
a
a
a
a
a
a
a
a
PAL
E32
z
a
a
a
a
a
a
a
a
a
PAL
E33
a
z
a
a
a
a
a
a
a
a
NTSC
AU2
AUS
z
a
a
a
a
a
PAL
HK1
HK
z
a
a
a
a
a
a
a
a
a
PAL
CN2
CH
a
a
a
z
a
a
a
a
a
a
PAL
KR2
KR
a
a
a
a
a
z
a
a
a
a
NTSC
AR2
AR
a
z
a
a
a
a
a
a
a
a
NTSC
BR1
BR
a
a
z
a
a
a
a
a
a
a
NTSC
z: INITIAL LANGUAGE
E
VIDEO OUT
Default
AEP
DESTINATION
AREA
SELECTABLE LANGUAGE
6-13
DSC-H3_ADJ
1.
Function of Each Button on USB Serial No. Input
Screen
Screen
Click the [USB SERIAL No. INPUT] button on the Main Menu screen,
and “USB SERIAL No. INPUT” screen in Fig. 6-1-12 will ap-
pear.
and “USB SERIAL No. INPUT” screen in Fig. 6-1-12 will ap-
pear.
Fig. 6-1-12
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Display area
The “PRODUCT ID”, “SERIAL No.” and “ASCII TRANS-
LATION” are displayed.
For the “ASCII TRANSLATION”, the last 5 characters of
model name are displayed if the PRODUCT ID is set from the
model name in the MANUAL WRITE. For the PRODUCT ID
set in the factory, the model name is not displayed but “?” etc.
will be displayed.
The “PRODUCT ID”, “SERIAL No.” and “ASCII TRANS-
LATION” are displayed.
For the “ASCII TRANSLATION”, the last 5 characters of
model name are displayed if the PRODUCT ID is set from the
model name in the MANUAL WRITE. For the PRODUCT ID
set in the factory, the model name is not displayed but “?” etc.
will be displayed.
3
[Check Serial] button
The USB SERIAL No. data is read from the camera and dis-
played in the display area.
The USB SERIAL No. data is read from the camera and dis-
played in the display area.
4
[Read and Save] button
The USB SERIAL No. data is read from the camera and saved
in PC as a file.
Default file name is as follows:
The USB SERIAL No. data is read from the camera and saved
in PC as a file.
Default file name is as follows:
5
[Load and Write] button
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camera.
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camera.
6
Input area
Enter the “SERIAL No.”.
For the “PRODUCT ID”, the last 5 characters of model name
are fixed. For the “SERIAL No.”, read it from the label on the
camera body and enter it.
Enter the “SERIAL No.”.
For the “PRODUCT ID”, the last 5 characters of model name
are fixed. For the “SERIAL No.”, read it from the label on the
camera body and enter it.
7
[Write Manually] button
The USB SERIAL No. data entered in the input area is written
to the camera.
The USB SERIAL No. data entered in the input area is written
to the camera.
1-4.
USB SERIAL No. INPUT
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model
name) and SERIAL No. into the screen and write them.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model
name) and SERIAL No. into the screen and write them.
5
3
4
2
7
6
1
DSC-H3_SERIAL_xxxxxxxx_yyyymmdd.dat
Date
USB serial number
Data name
USB serial number
Data name
6-14
DSC-H3_ADJ
1-5.
VIDEO SYSTEM ADJUSTMENTS
1-5-1.
Function of Each Button on Video System
Adjustment Screen
Adjustment Screen
Click the [VIDEO SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “VIDEO SYSTEM ADJUSTMENT”
screen in Fig. 6-1-13 will appear.
Menu screen, and the “VIDEO SYSTEM ADJUSTMENT”
screen in Fig. 6-1-13 will appear.
Fig. 6-1-13
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
Each adjustment “Composite Video Level Adjustment” or
“Component Video Level Adjustment” starts.
Each adjustment “Composite Video Level Adjustment” or
“Component Video Level Adjustment” starts.
4
[Reboot] button
When this button is clicked, the camera is rebooted.
When this button is clicked, the camera is rebooted.
5
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
1-5-2.
Adjustment Items of VIDEO System Adjust-
ment
ment
The adjustment items of video system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Table 6-1-3. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Table 6-1-3
Component
Video Level
Adjustment
Video Level
Adjustment
Block
Page
Address
Composite Video
Composite
Level Adj.
VIDEO terminal of USB, A/Vcable
for multi-use terminal
(75 ohm terminated)
for multi-use terminal
(75 ohm terminated)
Oscilloscope
Component Out
Y Level Adj.
Y Level Adj.
Land of HD_Y
(Component video out jig)
(Component video out jig)
Oscilloscope
Component Out
Pb Level Adj.
Pb Level Adj.
Oscilloscope
Component Out
Pr Level Adj.
Pr Level Adj.
Oscilloscope
Button
Name
Adjustment
Measurement Point
Measuring
Instrument
Adjusting Address
Video Level
Adjustment
Adjustment
11
11
11
11
60
60
60
60
06B8
0680
0681
0682
Land of HD_Pb
(Component video out jig)
(Component video out jig)
Land of HD_Pr
(Component video out jig)
(Component video out jig)
5
4
3
2
1
6-15
DSC-H3_ADJ
1-5-3.
Adjusting Method
1.
Composite Video Level Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. Composite Video Level Adj.
3. Release of Data Setting during Video Adj.
sequence]
1. Data Setting during Video Adj.
2. Composite Video Level Adj.
3. Release of Data Setting during Video Adj.
[Adjusting method]
1) Click the [Start] button of the Composite Video Level Adj.
2) The Automatic Adjustment Program executes the “1. Data
1) Click the [Start] button of the Composite Video Level Adj.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Video Adj.”.
3) If “1. Data Setting during Video Adj.” completed successfully,
the following screen is displayed during the execution of “2.
Composite Video Level Adj.”. Using the [Up]/[Down] button
on the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, click the
[End] button in the screen.
Composite Video Level Adj.”. Using the [Up]/[Down] button
on the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, click the
[End] button in the screen.
4) If the [End] button is clicked, the following message and screen
are displayed. Check that the sync signal level and burst level
of the video signals satisfies the specified value, and click the
[OK] button in the message.
of the video signals satisfies the specified value, and click the
[OK] button in the message.
5) If the [OK] button is clicked, “3. Release of Data Setting dur-
ing Video Adj.” will be executed.
6) Upon successful completion of all item the Composite Video
Level Adjustment, the following message is displayed. Click
the [OK] button.
the [OK] button.
Click on the first or last page to see other DSC-H3 (serv.man4) service manuals if exist.