Sony DSC-F828 (serv.man3) Service Manual ▷ View online
22
Inserting and removing a “Memory Stick”
,
Open the battery/“Memory
Stick” cover.
Stick” cover.
Slide the cover in the direction of the arrow.
,
Insert the “Memory Stick.”
Insert the “Memory Stick” all the way in
until it clicks as shown in the illustration.
until it clicks as shown in the illustration.
•
Whenever you insert a “Memory Stick,” push it
as far as it can go. If you do not insert it
correctly, a proper recording or playback may
not be carried out.
as far as it can go. If you do not insert it
correctly, a proper recording or playback may
not be carried out.
,
Close the battery/“Memory
Stick” cover.
Stick” cover.
To remove the “Memory Stick”
Open the battery/“Memory Stick” cover,
then push the “Memory Stick” to pop it out.
then push the “Memory Stick” to pop it out.
• Whenever the access lamp is lit, the
camera is recording or reading out an
image. Never remove the “Memory
Stick” or turn off the power at this time.
The data may be corrupted.
image. Never remove the “Memory
Stick” or turn off the power at this time.
The data may be corrupted.
2
1
3
2
1
2
Label side
Terminal side
3
Access lamp
23
S
h
o
o
tin
g
s
til
l ima
g
e
s
Inserting and removing a Microdrive/CF card
,
Open the CF card cover.
Slide the
OPEN (CF) lever in the
direction of the arrow.
,
Insert the Microdrive/CF card.
Insert the Microdrive/CF card all the way in
as shown in the illustration.
as shown in the illustration.
•
Whenever you insert a Microdrive/CF card,
push it as far as it can go. If you do not insert it
correctly, a proper recording or playback may
not be carried out.
push it as far as it can go. If you do not insert it
correctly, a proper recording or playback may
not be carried out.
,
Close the CF card cover.
•
Close the CF card cover properly, otherwise
you cannot record or play back images using
the Microdrive/CF card.
you cannot record or play back images using
the Microdrive/CF card.
1
2
Front (The
v
mark-
printed side)
3
24
To remove the Microdrive/CF card
Open the CF card cover, then push the CF
card eject lever so that the Microdrive/CF
card is ejected.
card eject lever so that the Microdrive/CF
card is ejected.
•
Note that the Microdrive may be heated right
after using the camera.
after using the camera.
• Whenever the access lamp is lit, the
camera is recording or reading out an
image. Never remove the Microdrive/CF
card or turn off the power at this time.
The data may be corrupted or the
Microdrive/CF card may become
unusable.
image. Never remove the Microdrive/CF
card or turn off the power at this time.
The data may be corrupted or the
Microdrive/CF card may become
unusable.
CF card eject
lever
lever
Access lamp
Setting the still image size
,
Set the mode dial to
and
turn on the power, then press
MENU.
MENU.
The menu appears.
•
You can carry out this operation even when the
mode dial is set to P, S, A, M, SCN.
mode dial is set to P, S, A, M, SCN.
1
8M
3:2
5M
3M
1M
Image Size
8M
Mode
MENU
,
Select
(Image Size) by
moving the multi-selector to
b
/
B
, then select the desired
image size by moving the
multi-selector to
multi-selector to
v
/
V
.
The image size is set.
After the setting is completed, press
MENU. The menu disappears from the
screen.
After the setting is completed, press
MENU. The menu disappears from the
screen.
•
For more information about the image size, see
page 25.
page 25.
•
This setting is maintained even when the power
is turned off.
is turned off.
2
8M
3:2
5M
3M
1M
Image Size
8M
Mode
8M
3:2
5M
3M
1M
Image Size
5M
Mode
25
S
h
o
o
tin
g
s
til
l ima
g
e
s
Image size and quality
You can choose image size (number of
pixels) and image quality (compression
ratio) based on the kind of images you want
to shoot. The larger you make the image
size and the higher you make the image
quality, the better your image, but also the
larger the amount of data needed to preserve
your image. This means you can save fewer
images in your recording medium.
Choose an image size and quality level
appropriately for the kind of images you
want to shoot.
pixels) and image quality (compression
ratio) based on the kind of images you want
to shoot. The larger you make the image
size and the higher you make the image
quality, the better your image, but also the
larger the amount of data needed to preserve
your image. This means you can save fewer
images in your recording medium.
Choose an image size and quality level
appropriately for the kind of images you
want to shoot.
1)
The default setting is [8M]. This size can give the highest image quality using this camera.
2)
This option records images in a horizontal to vertical proportion of 3:2 to match the size of the print
paper used.
paper used.
The number of images that can be saved in a “Memory Stick”
3)
The number of images that can be saved in Fine (Standard)
4)
mode are shown below. (Units:
number of images)
3)
When [Mode] (REC Mode) is set to [Normal]
For the number of images that can be saved in other modes, see pages 134, 135.
For the number of images that can be saved in other modes, see pages 134, 135.
4)
For more information about the image quality (compression ratio) mode, see page 49.
Image size
Examples
8M
1)
(3264×2448)
• For storing important images or printing A3 size or fine A4 size
images.
3:2
2)
(3264×2176)
5M (2592×1944)
• For printing A4 size or fine A5 size images.
3M (2048×1536)
1M (1280×960)
• For printing postcard size images.
VGA (640×480)
• For shooting a lot of images, attaching images to e-mail, or
posting images to your home page.
Capacity
16MB
32MB
64MB
128MB
MSX-256
MSX-512
MSX-1G
Image
size
size
8M
4 (7)
8 (15)
16 (30)
32 (60)
59 (109)
121 (223)
247 (456)
3:2
4 (7)
8 (15)
16 (30)
32 (60)
59 (109)
121 (223)
247 (456)
5M
6 (11)
12 (23)
25 (48)
51 (96)
92 (174)
188 (354)
384 (723)
3M
10 (18)
20 (37)
41 (74)
82 (149)
148 (264)
302 (537)
617 (1097)
1M
24 (46)
50 (93)
101 (187)
202 (376)
357 (649)
726 (1320) 1482 (2694)
VGA
97 (243) 196 (491) 394 (985) 790 (1975) 1428 (3571) 2904 (7261)
5928
(14821)
Larger
Smaller
Click on the first or last page to see other DSC-F828 (serv.man3) service manuals if exist.