Sony DSC-F717 (serv.man3) Service Manual ▷ View online
15
G
e
tti
ng st
ar
te
d
Turning on/off your camera
, Slide the POWER switch in the
direction of the arrow.
The POWER lamp (green) lights up and the
power is on. When you turn on your camera
for the first time, the CLOCK SET screen
appears (page 16).
power is on. When you turn on your camera
for the first time, the CLOCK SET screen
appears (page 16).
Turning off the power
Slide the POWER switch in the direction of
the arrow again. The POWER lamp goes
out, and the camera turns off.
Slide the POWER switch in the direction of
the arrow again. The POWER lamp goes
out, and the camera turns off.
Auto power-off function
If you do not operate the camera for about
three minutes during shooting or viewing or
when performing SET UP, the camera turns
off automatically to prevent wearing down
the battery. The auto power-off function
only operates when the camera is operating
using a battery pack. The auto power-off
function also will not operate in the
following circumstances.
• When viewing movies
• When playing back a slide show
• When a connector is plugged into the
three minutes during shooting or viewing or
when performing SET UP, the camera turns
off automatically to prevent wearing down
the battery. The auto power-off function
only operates when the camera is operating
using a battery pack. The auto power-off
function also will not operate in the
following circumstances.
• When viewing movies
• When playing back a slide show
• When a connector is plugged into the
(USB) jack or the A/V OUT (MONO)
jack.
POWER
switch
switch
POWER lamp
How to use the
control button
control button
To change the current settings of the
camera, bring up the menu or the SET UP
screen (page 42), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
b/B to make the setting.
camera, bring up the menu or the SET UP
screen (page 42), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
b/B to make the setting.
MODE
200
100
100
400
800
AUTO
BURST 3
EXP BRKTG
E-MAIL
VOICE
TIFF
NORMAL
MODE
ISO
16
Setting the date and time
, Set the mode dial to
.
• You can also carry out this operation when the
mode dial is set to
,
S, A, M, SCN,
or
.
• To change the date and time, set the mode dial
to SET UP, select [CLOCK SET] in
(SETUP 2) (page 112), and perform the
procedure from step 3.
procedure from step 3.
, Slide the POWER switch in the
direction of the arrow to turn
on the power.
on the power.
The POWER lamp (green) lights up and the
CLOCK SET screen appears on the screen.
CLOCK SET screen appears on the screen.
, Select the desired date display
format with v/V on the control
button, then press z.
button, then press z.
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery, which
provides the power for saving the time data, is
ever fully discharged (page 113), the CLOCK
SET screen will appear again. When this
happens, reset the date and time, by starting
from step 3 above.
ever fully discharged (page 113), the CLOCK
SET screen will appear again. When this
happens, reset the date and time, by starting
from step 3 above.
1
Mode dial
2
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
POWER switch
3
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
17
G
e
tti
ng st
ar
te
d
, Select the year, month, day,
hour or minute item you want
to set with b/B on the control
button.
to set with b/B on the control
button.
The item to be set is indicated with v/V.
, Set the numeric value with v/V
on the control button, then
press z to enter it.
press z to enter it.
After entering the number, v/V moves to
the next item. Repeat this step until all of
the items are set.
the next item. Repeat this step until all of
the items are set.
• If you selected [D/M/Y] in step 3, set the time
on a 24-hour cycle.
, Select [OK] with B on the
control button, then press z.
The date and time are entered and the clock
starts to keep time.
starts to keep time.
• To cancel the date and time setting, select
[CANCEL] with v/V/b/B on the control
button, then press z.
button, then press z.
4
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
5
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2003 /
:
/ 1
1
12
00
AM
OK
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2003 /
:
/ 4
7
10
30
PM
OK
6
18
Inserting and removing a “Memory Stick”
, Open the battery/“Memory
Stick” cover.
Slide the cover in the direction of the arrow.
, Insert the “Memory Stick.”
Insert a “Memory Stick” as far as it can go
with the b mark facing as illustrated.
with the b mark facing as illustrated.
• Push the “Memory Stick” all of the way in so
that it is securely seated in the connector. If the
“Memory Stick” is not inserted correctly, you
may not be able to record or display images
with the “Memory Stick.”
“Memory Stick” is not inserted correctly, you
may not be able to record or display images
with the “Memory Stick.”
, Close the battery/“Memory
Stick” cover.
To remove a “Memory Stick”
Open the battery/“Memory Stick” cover,
then push the “Memory Stick” to pop it out.
Open the battery/“Memory Stick” cover,
then push the “Memory Stick” to pop it out.
• Whenever the access lamp is lit, the
camera is recording or reading an
image. Never remove the “Memory
Stick” or turn off the power at this time.
image. Never remove the “Memory
Stick” or turn off the power at this time.
1
2
b mark
3
Access lamp
Shooting still images
Click on the first or last page to see other DSC-F717 (serv.man3) service manuals if exist.