DOWNLOAD Sony DSC-F717 (serv.man2) Service Manual ↓ Size: 8.78 MB | Pages: 80 in PDF or view online for FREE

Model
DSC-F717 (serv.man2)
Pages
80
Size
8.78 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-f717-sm2.pdf
Date

Sony DSC-F717 (serv.man2) Service Manual ▷ View online

SERVICE MANUAL
LEVEL
 
2
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (99299945
[]
.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (99299944
[]
.pdf).
• Reference No. search on printed wiring boards is available.
• When the laser unit (D001) is repaired.
Make sure to follow the items of “NOTE ON HANDLING THE LASER DIODE”.
On the SY-080 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the SY-080 board.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the SY-080
board are not shown.
The following pages are not shown.
Schematic diagram ........................... Pages 4-9 to 4-22
Printed wiring board .......................... Pages 4-51 to 4-54
Waveforms .......................................... Pages 4-74 and 4-75
Mounted parts location ...................... Page 4-80
Electrical parts list ............................ Pages 5-14 to 5-17
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
Ver. 1.3  2008.04
DIGITAL STILL CAMERA
DSC-F717
— 2 —
DSC-F717
SPECIFICATIONS
COVER
COVER
System
Image device
11 mm (2/3 type) color CCD
Primary color filter
Total pixels number of camera
Approx. 5 240 000 pixels
Effective pixels number of camera
Approx. 5 020 000 pixels
Lens
5× zoom lens
f = 9.7 – 48.5 mm (13/32 – 
1 15/16 inches) (38 – 190 mm 
(1 1/2 – 7 1/2 inches) when converted 
to a 35 mm still camera)
F2.0 – 2.4
Filter diameter: 58 mm (2 3/8 inches)
Exposure control
Automatic exposure, Shutter speed 
priority, Aperture priority, Manual 
exposure, Scene selection (4 modes)
White balance
Automatic, Daylight, Cloudy, 
Fluorescent, Incandescent, One-push
Data format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG 
compliant, GIF (for Clip Motion), 
TIFF, DPOF compatible
Audio with still image: 
MPEG1 compliant (Monaural)
Moving images: 
MPEG1 compliant (Monaural)
Recording media
“Memory Stick”
Flash
Recommended distance (ISO set to 
Auto): 0.3 m to 4.5 m (11 7/8 inches 
to 177 1/4 inches)
Accessories 
• AC-L10A/L10B AC power adaptor
• Power cord (mains lead)
• USB cable
• NP-FM50 battery pack
• A/V connecting cable
• “Memory Stick” (32 MB) 
• Shoulder strap
• Lens cap
• Lens cap strap
• CD-ROM (USB driver SPVD-008)
• Operating instructions
Design and specifications are subject to change 
without notice.
Viewfinder
Electric viewfinder (color)
Input/Output connectors
A/V OUT (MONO) (Monaural) 
Minijack 
Video: 1 Vp-p, 75 
, unbalanced, 
sync negative 
Audio: 327 mV (at a 47 k
 load) 
Output impedance 2.2 k
ACC jack
Mini-minijack (ø 2.5 mm)
USB jack
mini-B
LCD screen
Used LCD panel
4.6 cm (1.8 type) TFT drive
Total number of dots
123 200 (560×220) dots
General
Used battery pack
NP-FM50 (supplied)
Power requirements
7.2 V
Power consumption (during shooting)
2.3 W
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions
119.5×68.9×151 mm 
(4 3/4×2 3/4×6 inches)
(W/H/D, excluding maximum 
protrusions)
Mass
Approx. 696 g (1 lb 8 oz) (including 
battery pack NP-FM50, “Memory 
Stick,” shoulder strap and lens cap)
Built-in microphone
Electret condenser microphone
Built-in speaker
Dynamic speaker
AC-L10A/L10B AC power 
adaptor
Power requirements 
100 to 240 V AC, 50/60 Hz 
Rated output voltage
DC 8.4 V, 1.5 A in operating mode
Operating temperature 
0°C to 40°C (32°F to 104°F) 
Storage temperature 
–20°C to +60°C (–4°F to +140°F) 
Dimensions 
Approx. 125×39×62 mm 
(5×1 9/16×2 1/2 inches) (w/h/d, 
excluding maximum protrusions) 
Mass
 Approx. 
280 g 
(10 oz) 
NP-FM50 battery pack 
Used battery 
Lithium-ion battery 
Maximum voltage 
DC 8.4 V 
Nominal voltage 
DC 7.2 V 
Capacity
 8.5 Wh 
(1 180 mAh)
Operating temperature 
0°C to 40°C (32°F to 104°F)
Dimensions
Approx. 38.2×20.5×55.6 mm 
(1 9/16×13/16×2 1/4 inches) (w/h/d)
Mass
 
Approx. 76 g (3 oz)
— 3 —
DSC-F717
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
This statement is indicated under the lens.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
— 4 —
DSC-F717
TABLE OF CONTENTS
Section
Title
Page
1.
SERVICE NOTE
1-1.
Note for Repair ································································ 1-1
1-2.
Discharging of the BT-015 Board’s Charging Capacitor
(C414, 415) ······································································ 1-1
1-2-1. Preparing the Short Jig ···················································· 1-1
1-2-2. Discharging the Capacitor ··············································· 1-1
1-3.
Notes on Handling the Laser Diode
[Laser Unit (D001)] ························································· 1-2
1-4.
Description on Self-diagnosis Display ···························· 1-2
2.
DISASSEMBLY
2-1.
Cabinet (Rear) Assembly ················································· 2-2
2-2.
EVF Assembly ································································· 2-2
2-3.
PD-179 Board ·································································· 2-3
2-4.
LCD Module ···································································· 2-3
2-5.
AL-013 Board, DC-IN Jack ············································ 2-3
2-6.
SW-379 Board ································································· 2-3
2-7.
Cabinet (LL) Assembly ··················································· 2-5
2-8.
Cabinet (MF) Assembly ·················································· 2-5
2-9.
Lens Complete Assembly ················································ 2-6
2-10. SY-080 Board ·································································· 2-7
2-11. Control Switch Block (FZ51050) ···································· 2-7
2-12. FR-194 Board ·································································· 2-8
2-13. BT-015 Board ·································································· 2-8
2-14. Cabinet (L) Block Assembly ··········································· 2-8
2-15. FP-617 Flexible Board ···················································· 2-9
2-16. Stroboscope Block Assembly ········································ 2-10
2-17. Flash Unit ······································································ 2-10
2-18. Circuit Boards Location ················································ 2-11
2-19. Flexible Boards Location ·············································· 2-12
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1/3) ··········································· 3-1
3-2.
Overall Block Diagram (2/3) ··········································· 3-3
3-3.
Overall Block Diagram (3/3) ··········································· 3-5
3-4.
Power Block Diagram (1/2) ············································· 3-7
3-5.
Power Block Diagram (2/2) ············································· 3-9
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagram ·············································· 4-1
4-2.
Schematic Diagrams ························································ 4-5
CD-408 (CCD IMAGER) ················································ 4-7
FR-194 (1/4) (VIDEO AMP CONNECTION) ············· 4-23
FR-194 (2/4) (AUDIO) ·················································· 4-25
FR-194 (3/4) (HI CONTROL) ······································ 4-27
FR-194 (4/4) (DC CONTROL) ····································· 4-29
PD-179 (1/2)
(EVF LCD DRIVE, TIMING GENERATOR) ············· 4-31
PD-179 (2/2)
(LCD DRIVE, TIMING GENERATOR) ······················ 4-33
BT-015 (DC IN, STROBO CHARGE) ························· 4-35
LB-082 (EVF) ······························································· 4-37
AL-013 (A/V JACK) ····················································· 4-38
UJ-002 (USB CONNECTOR) ······································ 4-39
TY-014 ··········································································· 4-40
AJ-005 (ACC JACK) ····················································· 4-41
SW-379 (CONTROL SWITCH) ··································· 4-42
MF51050, FZ51050 ······················································· 4-43
PW51050, FP-583, FP-584 ··········································· 4-45
4-3.
Printed Wiring Boards ··················································· 4-47
CD-408 ·········································································· 4-49
FR-194 ··········································································· 4-55
PD-179 ··········································································· 4-59
BT-015 ··········································································· 4-63
LB-082 ··········································································· 4-65
AL-013 ·········································································· 4-67
UJ-002 ··········································································· 4-69
AJ-005 ··········································································· 4-70
SW-379 ·········································································· 4-71
4-4.
Waveforms ····································································· 4-73
4-5.
Mounted Parts Location ················································ 4-79
5.
REPAIR  PARTS  LIST
5-1.
Exploded Views ···························································· 5-1
5-1-1. Main Section ································································· 5-1
5-1-2. Cabinet (L) Block Assembly ········································· 5-2
5-1-3. Stroboscope Block Assembly ······································· 5-3
5-1-4. Lens Complete Assembly ············································· 5-4
5-1-5. Cabinet (Front) Block Assembly ·································· 5-5
5-1-6. Cabinet (Rear) Block Assembly ··································· 5-6
5-1-7. EVF Block Assembly ···················································· 5-7
5-2.
Electrical Parts List ······················································· 5-8
Section
Title
Page
Page of 80
Display

Sony DSC-F717 (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony DSC-F717 (serv.man2) Service Manual ↓ Size: 8.78 MB | Pages: 80 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-F717 (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-F717 (serv.man2) Digital Camera. Information contained in Sony DSC-F717 (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.