Sony XR-C750 Service Manual ▷ View online
– 17 –
CHASSIS (S) ASSY
LEVER (MODE)
3 screw (PS 2x4)
2 screw (PS 2x4)
1 chassis (S) assy
1. Align
¢ mark on the rotary switch with
hole in the lever (mode).
2. Fit on positions A, B and C and install
the lever (mode).
2. Fit on positions A, B and C and install
the lever (mode).
¢ mark on rotary switch
hole in lever (mode)
lever (mode)
rotary switch
C
A
B
– 18 –
LEVER (PINCH SELECTION)
1 Align.
2 lever (pinch selection)
5 step screw (HP)
1 Fit in groove.
ATS lever
3 Press the ATS lever.
4 Position the head plate sub
assy as shown in the figure.
assy as shown in the figure.
2 Fit shaft in groove.
head plate sub assy
groove
HEAD PLATE ASSY
6 step screw (HP)
– 19 –
LEVER (PINCH) ASSY
4 Fit shaft of the lever (pinch) assy in
hole on the chassis (M) assy and
install the lever (pinch) assy.
hole on the chassis (M) assy and
install the lever (pinch) assy.
5 claw
B
shaft
C
shaft
7 Install the spring (pinch press) to shaft A.
Set the ends of spring to B and C.
Set the ends of spring to B and C.
C
B
shaft A
hole
hole
2 claw
3 polyethylene washer
1 Fit shaft of the lever (pinch) assy in
hole on the chassis (M) assy and
install the lever (pinch) assy.
hole on the chassis (M) assy and
install the lever (pinch) assy.
1 Install the catch to the hanger.
hanger
5 Fit projections on C part.
2 Install the hanger on to
two claws of the housing.
two claws of the housing.
C part
D part
B part
A part
HOUSING
6 polyethylene washer
7 Holder the hanger by bending the claw.
4 Fit claw on B part.
8 Holder the hanger by
bending the claw.
bending the claw.
6 Fit projection on D part.
3 Put the housing
under A part.
under A part.
– 20 –
ARM (SUCTION)
1 Fit the arm (suction) on the shaft.
2 Move the arm (suction) in the arrow
direction and fit on projection.
direction and fit on projection.
2 Fit the lever (LDG-B) on
shafts A – E and install it.
shafts A – E and install it.
shaft A
shaft B
shaft C
1 Fit the lever (LDG-A) on
shafts A – C and install it.
shafts A – C and install it.
shaft C
shaft A
shaft D
shaft E
3 two type-E stop ring 2.0
LEVER (LDG-A) / (LDG-B)
Projection
Click on the first or last page to see other XR-C750 service manuals if exist.