Sony XR-C750 Service Manual ▷ View online
– 13 –
SECTION 2
DISASSEMBLY
Note :
Follow the disassembly procedure in the numerical order given.
2-1. COVER ASSY
1 claw
4 cover assy
2 claw
3 claws
4 front panel assy
1 Push the button (OPEN).
2 Push the bearing (R).
3 Push the bearing (L).
2-2. FRONT PANEL ASSY
– 14 –
2-3. SUB PANEL ASSY
3 CN231
2-4. MECHANISM DECK BLOCK
3 PTT 2.6x8
2 PTT 2.6x8
6 sub panel assy
1 PTT 2.6x8
5 claw
4 claws
2 CN201
1 screws
(2.6x6) (C TIGHT)
(2.6x6) (C TIGHT)
4 mechanism deck block
– 15 –
2-5. HEAT SINK
4 insulator
2 ground point screws
2-6. MAIN BOARD
1 CN302
8 heat sink
7 PTT 2.6x8
5 PTT 2.6x8
4 PTT 2.6x8
2 PTT 2.6x8
3 cord (with connector)
6 PTT 2.6x8
1 ground point screw
3 MAIN board
– 16 –
GEAR (LDG-E)
Note :
Follow the assembly procedure in the numerical order given.
ALIGNMENT OF ROTARY SWITCH
SECTION 3
ASSEMBLY OF MECHANISM DECK
2 Align hole in the gear (LDG-D) with
the position shown in the figure.
the position shown in the figure.
1 Align ¢ mark on the rotary switch
the position shown in the figure.
the position shown in the figure.
hole
2 Install the gear (LDG-E).
1 Align hole as shown in the figure.
chassis (S) assy
Click on the first or last page to see other XR-C750 service manuals if exist.