Sony XR-3750 / XR-3758 / XR-3759 / XR-7750 / XR-C350 / XRS-888 Service Manual ▷ View online
– 9 –
– 10 –
Note:
Follow the disassembly procedure in the numerical order given.
FRONT PANEL ASS’Y
1 Push the button
(release)
A
2 Remove the front panel ass’y
to the direction of the arrow A.
COVER ASS’Y
SECTION 2
DISASSEMBLY
2
1
3 cover ass’y
1
2
– 11 –
5 screw
(PTT2.6
×
6)
6 mechanism deck
(MG-52A-135)
4 flexible flat cable
(CN301)
1 three screws
(PTT2.6
×
8)
1 three screws
(PTT2.6
×
8)
2 sub panel
3 connector
(CN302)
SUB PANEL, MECHANISM DECK (MG-52A-135)
MAIN BOARD, HEAT SINK
2 two ground point
screws
1 two screws
(PTT2.6
×
8)
3 main board
5 heat sink
4 screw
(PTT2.6
×
8)
(XR-C350 only)
1 screw (PTT2.6
×
8)
4 screw (PTT2.6
×
8)
(XR-C350 only)
4 six screws
PTT2.6
×
8 : XR-C350
PTT2.6
×
10 : XR-3750
– 12 –
SECTION 3
ASSEMBLY OF MECHANISM DECK
Note:
Follow the assembly procedure in the numerical order given.
ALIGNMENT OF FRONT SWITCH
1 Align ¢ mark on the rotary switch
the position shown in the figure.
chassis (S) ass’y
2 Align hole in the gear (LDG-D) with the
position shown in the figure.
hole
2 Install the gear (LDG-E).
1 Align hole as shown in the figure.
GEAR (LDGE)
Click on the first or last page to see other XR-3750 / XR-3758 / XR-3759 / XR-7750 / XR-C350 / XRS-888 service manuals if exist.