Sony XR-3740 / XR-C340 Service Manual ▷ View online
– 13 –
CHASSIS (S) ASS’Y
2
screw (PS2
×
4)
1
chassis (S) ass’y
2
screw (PS2
×
4)
1. Align
¢
mark on the rotary switch with
hole in the lever (mode).
2. Fit on positions
A
,
B
and
C
and install
the lever (mode).
LEVER (MODE)
hole in lever (mode)
¢
mark on rotary switch
lever (mode)
rotary switch
A
B
C
– 14 –
LEVER (PINCH SELECTION)
1
Align.
2
lever (pich selection)
HEAD PLATE ASS’Y
5
step screw (HP)
5
step screw (HP)
2
Fit shaft in groove.
ATS lever
1
Fit in groove.
3
Press the ATS lever.
4
Position the head plate sub
ass’y as shown in the figure.
ass’y as shown in the figure.
groove
– 15 –
LEVER (PINCH) ASS’Y
1
Fit shaft of the lever (Pinch) ass’y
in hole on the chassis (M) ass’y and
install the lever (pinch) ass’y.
in hole on the chassis (M) ass’y and
install the lever (pinch) ass’y.
2
two polyethylene washers
shaft
shaft
B
C
C
B
shaft
A
3
Install the spring (pinch press) to shaft
A
.
Set the ends of spring to
B
and
C
.
HOUSING
2
Install the hanger on to
two claws of the housing.
two claws of the housing.
1
Install the catch to the hanger.
7
Holder the hanger by bending the claw.
A
part
B
part
C
part
D
part
8
Holder the hanger by
bending the claw.
bending the claw.
3
Put the housing
under
under
A
part.
4
Fit claw on
B
part.
6
Fit projections on
D
part.
5
Fit projections on
C
part.
hanger
– 16 –
ARM (SUCTION)
2
Move the arm (suction) in the arrow
direction and fit on projection.
direction and fit on projection.
1
Fit the arm (suction) on the shaft.
projection
1
Fit the lever (LDG-A)
on shaft
on shaft
A
–
C
and install it.
shaft
A
shaft
B
shaft
C
3
two type-E stop ring 2.0
2
Fit the lever (LDG-B)
on shafts
on shafts
A
and
B
and
install.
shaft
A
shaft
B
LEVER (LDG-A) / (LDG-B)
Click on the first or last page to see other XR-3740 / XR-C340 service manuals if exist.