Sony XAV-65 Service Manual ▷ View online
XAV-65
17
3-6. KEY BOARD
–
Front panel block rear view
–
5 two screws
(K
M2
u 3.5)
1 VOL knob assy
2 connector
(CON701)
3 touch panel flexible board
(CON602)
4 LCD flexible board
(LCD601)
A
B
5 screw
(K
M2
u 3.5)
6 screw
(B2
u 8)
5 screw
(K
M2
u 3.5)
7 two claws
7 two claws
7 claw
8 KEY board
KEY board
E712
A
B
6 screw
(B2
u 8)
6 screw
(B2
u 8)
Insert is shallow
Insert is straight
to the interior.
to the interior.
NG
OK
Note 3: When installing the connector, please
install them correctly.
There is a possibility that this machine
damages when not correctly installing it.
Wire setting
Insert is straight to the interior.
Insert is incline
flexible board
connector
connector
flexible board
OK
NG
Note 2: When installing the flexible board, insert straight to the connector.
No slanting after insertion.
Note 1: When the complete KEY board is replaced, refer
to “FLICKER ADJUSTMENT” on page 18.
Note 4: KEY board has been changed from the midway
of production. When replacing KEY board,
please refer to “DISTINGUISHING BETWEEN
THE FORMER AND NEW TYPES OF THE
COMPLETE KEY BOARD, GUIDE ASSY,
AND FRONT PANEL ASSY” on page 5 (Except
Saudi Arabia model).
please refer to “DISTINGUISHING BETWEEN
THE FORMER AND NEW TYPES OF THE
COMPLETE KEY BOARD, GUIDE ASSY,
AND FRONT PANEL ASSY” on page 5 (Except
Saudi Arabia model).
Ver. 1.1
XAV-65
18
SECTION 4
ELECTRICAL ADJUSTMENT
MONITOR SECTION
If any of the following parts was replaced, execute the “Flicker
Adjustment” as mentioned below.
•
Adjustment” as mentioned below.
•
CHASSIS MAIN ASSY (CHA1)
•
FRONT PANEL ASSY (FP1)
•
COMPLETE KEY BOARD
Preparation:
•
•
Remote commander (RM-X170)
FLICKER ADJUSTMENT
1. Turn the power on, and perform the aging more than fi ve min-
1. Turn the power on, and perform the aging more than fi ve min-
utes.
2. In the state of source off (Home screen is displayed), pressing
the buttons on the remote commander in order of the [4]
→ [5]
→ [4] (press only the [4] button for two seconds).
The test mode 4 starts, and the following screen is displayed on
the monitor.
the monitor.
(Displayed colors/values in the following fi gure are example)
PAL_SEL:0
SWAP:0
VCOM:064
TEST 4
3. Press the [B] button on the remote commander to set the
“PAT_SEL:9”.
4. Press the [b] button on the remote commander to set the
“SWAP:0”.
5. Press the [V] or [v] button on the remote commander to adjust
so that the fl icker becomes minimum in the sight.
(There is a point most suitable in the range of VCOM:045 to
VCOM:090)
VCOM:090)
The relation between the fl icker and the adjustment value has
the characteristic such as the following fi gure.
the characteristic such as the following fi gure.
Example of characteristic:
Flicker
VCOM value
bad
o
m
good
6. Press the [PUSH SOURCE/ OFF] button on the main unit,
and turn the power off.
19
XAV-65
SECTION 5
EXPLODED VIEW
1
A-2018-260-A VOL
KNOB
ASSY
2
9-885-192-54 SCREW +K M2X3.5 (EP-FE/ZNBK/CM2)
3
A-2018-252-A KEY BOARD, COMPLETE (Including bracket,
insulating sheet) (US, CND, AEP, RU, UK)
(Former) (See Note 2, 3)
3
A-2018-253-A KEY BOARD, COMPLETE (Including bracket,
insulating sheet) (E (NTSC), E (PAL), IND, AUS)
(Former) (See Note 2, 3)
3
A-2058-305-A KEY BOARD, COMPLETE (Including bracket,
insulating sheet) (New) (See Note 2, 3)
4
9-885-192-56 SCREW +B 2X8 TYPE2 (EP-FE/ZNBK)
5
9-885-192-50 SHEET (PROTECTION, KEY)
6
4-294-049-01 SCREW (M2.6X5 B/F)
7
A-2018-259-A GUIDE ASSY (Former) (See Note 3)
7
A-2058-326-A GUIDE ASSY (New) (See Note 3)
8
9-885-192-55 SCREW +B M2X3.5 (EP-FE/ZN/CM2)
CHA1
A-2018-254-A CHASSIS MAIN ASSY (Including MAIN board,
fl exible fl at cable) (US, CND) (See Note 1, 2)
CHA1 A-2018-255-A CHASSIS
MAIN
ASSY
(Including MAIN board, fl exible fl at cable)
(AEP, RU, UK, E (NTSC)) (See Note 1, 2)
CHA1
A-2018-256-A CHASSIS MAIN ASSY (Including MAIN board,
fl exible fl at cable) (E (PAL), EA, IND, AUS)
(See Note 1, 2)
0 DVM1
A-2018-258-A DVD DECK ASSY (DR28N-ABB-YG)
(Including DVD board, bracket)
CNC1
9-885-192-48 CONNECTION CABLE (SW) (for Steering Control)
F1
9-885-192-49 MINI FUSE (BLADE TYPE) (10A)
FFC1
9-885-192-52 FFC (DECK TO MAIN MT, SJ-V080-0)
FP1
A-2018-250-A PANEL ASSY, FRONT (Including LCD module,
touch panel) (US, CND, AEP, RU, UK)
(Former) (See Note 2, 3)
FP1
A-2018-251-A PANEL ASSY, FRONT (Including LCD module,
touch panel) (E (NTSC), E (PAL), IND, AUS)
(Former) (See Note 2, 3)
FP1
A-2063-274-A PANEL ASSY, FRONT (Including LCD module,
touch panel) (US, CND, AEP, RU, UK)
(New) (See Note 2, 3)
FP1
A-2063-275-A PANEL ASSY, FRONT (Including LCD module,
touch panel) (E (NTSC), E (PAL), EA, IND, AUS)
(New) (See Note 2, 3)
PW1
1-846-035-11 CONNECTION CABLE (ISO) (POWER)
(AEP, RU, UK)
PW1
1-846-039-11 CONNECTION CABLE, AUTOMOBILE (POWER)
(US, CND, E (NTSC), E (PAL), EA, IND, AUS)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
• Abbreviations
AUS :
AUS :
Australian
model
CND : Canadian model
EA
EA
: Saudi Arabia model
IND
: Indian model
RU
: Russian model
not supplied
FP1
CHA1
FFC1
DVM1
F1
1
6
6
6
6
6
6
6
8
8
6
7
2
2
2
2
3
4
4
4
4
5
PW1
CNC1
6
not supplied
A
B
A
B
C
C
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
Note 1: When the chassis main assy (CHA1) is replaced,
refer to “NOTE OF REPLACING THE CHAS-
SIS MAIN ASSY (CHA1)” on page 4.
SIS MAIN ASSY (CHA1)” on page 4.
Note 2: When the chassis main assy (CHA1), front panel
assy (FP1) or complete KEY board is replaced, re-
fer to “FLICKER ADJUSTMENT” on page 18.
fer to “FLICKER ADJUSTMENT” on page 18.
Ver. 1.1
Note 3: Ref. No. 3, 7 and FP1 has been changed from the
midway of production. When replacing Ref. No. 3,
7 or FP1, please refer to “DISTINGUISHING BE-
TWEEN THE FORMER AND NEW TYPES OF
THE COMPLETE KEY BOARD, GUIDE ASSY,
AND FRONT PANEL ASSY” on page 5 (The parts
used for Saudi Arabia model are only new types.).
7 or FP1, please refer to “DISTINGUISHING BE-
TWEEN THE FORMER AND NEW TYPES OF
THE COMPLETE KEY BOARD, GUIDE ASSY,
AND FRONT PANEL ASSY” on page 5 (The parts
used for Saudi Arabia model are only new types.).
Ref. No.
Part No.
Description
Remark
XAV-65
20
SECTION 6
ACCESSORIES
ACCESSORIES
************
1-487-638-13 REMOTE COMMANDER (RM-X170)
(E (NTSC), IND)
4-484-834-13 MANUAL,
INSTRUCTION
(ENGLISH, FRENCH, SPANISH) (US, CND)
4-484-834-23 MANUAL, INSTRUCTION (ENGLISH, SPANISH)
(E (NTSC))
4-484-834-33 MANUAL, INSTRUCTION (ENGLISH)
(E (PAL), EA, IND, AUS)
4-484-834-43 MANUAL,
INSTRUCTION
(ENGLISH, SPANISH, ITALIAN) (AEP, UK)
4-484-834-53 MANUAL,
INSTRUCTION
(FRENCH, GERMAN, DUTCH) (AEP, UK)
4-484-834-63
MANUAL, INSTRUCTION (RUSSIAN, UKRAINIAN)
(RU)
4-484-834-73 MANUAL, INSTRUCTION (ARABIC, PERSIAN)
(EA)
4-484-835-11 MANUAL, INSTRUCTION, INSTALL
(ENGLISH, FRENCH, SPANISH) (US, CND)
4-484-835-21 MANUAL, INSTRUCTION, INSTALL
(ENGLISH, SPANISH, ARABIC, PERSIAN)
(E (NTSC), E (PAL), EA, IND, AUS)
4-484-835-31 MANUAL, INSTRUCTION, INSTALL
(ENGLISH, SPANISH, ITALIAN) (AEP, UK)
4-484-835-41 MANUAL, INSTRUCTION, INSTALL
(FRENCH, GERMAN, DUTCH) (AEP, UK)
4-484-835-51 MANUAL, INSTRUCTION, INSTALL
(RUSSIAN, UKRAINIAN) (RU)
*************************************************************
PARTS FOR INSTALLATION AND CONNECTIONS
**************************************
501
9-885-192-48 CONNECTION CABLE (SW) (for Steering Control)
502
3-934-325-21 SCREW, +K (5X8) TAPPING (1 piece)
503
1-846-035-11 CONNECTION CABLE (ISO) (POWER)
(AEP, RU, UK)
503
1-846-039-11 CONNECTION CABLE, AUTOMOBILE (POWER)
(US, CND, E (NTSC), E (PAL), EA, IND, AUS)
504
X-2588-296-1 FITTING FRAME ASSY (AEP, UK)
505
4-464-557-01 TRIM-PLATE (AEP, UK)
506
4-479-204-01 RELEASE KEY (1 piece) (AEP, UK)
507
A-2018-274-A COLLAR
ASSY
(IND)
CONNECTING CABLE (SW)
u1
POWER CORD (ISO)
u1
501
503
504
506
507
502
POWER CORD
u1
503
FITTING ASSY FRAME
u1
505
COLLAR
u1
RELEASE KEY
u2
COLLAR ASSY
u1
+K5
u8
u6
(AEP, RU, UK)
(AEP, UK)
(IND)
(US, CND, E (NTSC),
E (PAL), EA, IND, AUS)
E (PAL), EA, IND, AUS)
• Abbreviations
AUS :
AUS :
Australian
model
CND : Canadian model
EA
EA
: Saudi Arabia model
IND
: Indian model
RU
: Russian model
Ver. 1.1
Click on the first or last page to see other XAV-65 service manuals if exist.