Sony MEX-GS610BE / MEX-GS610BT / MEX-N6050BT Service Manual ▷ View online
MEX-GS610BE/GS610BT/N6050BT
13
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
• Please cut out along the dotted line and use it.
MEX-GS610BE/GS610BT/N6050BT
14
MEMO
MEX-GS610BE/GS610BT/N6050BT
15
CD mechanism deck
CD mechanism deck
insulating sheet
insulating sheet
stand
stand
main unit
main unit
cable flexible flat (27 core)
Note: Do not cable flexible flat (27 core) is
Note: Do not cable flexible flat (27 core) is
damaged by the edge of the chassis.
cable flexible flat (27 core)
Note: Do not cable flexible flat (27 core) is
Note: Do not cable flexible flat (27 core) is
damaged by the edge of the chassis.
OK
OK
main unit
main unit
cable flexible flat (27 core)
cable flexible flat (27 core)
CD mechanism deck
Note: CD mechanical deck should
Note: CD mechanical deck should
not be placed vertically.
CD mechanism deck
Note: CD mechanical deck should
Note: CD mechanical deck should
not be placed vertically.
NG
main unit
cable flexible flat (27 core)
CD mechanism deck
Note: CD mechanical deck should
Note: CD mechanical deck should
not be placed upside down.
NG
NG
SERVICE POSITION
Ver. 1.2
Note: The length of cable fl exible fl at (27 core) has been changed from 150 mm to 80
mm in the midway of production.
When the length of cable fl exible fl at (27 core) is 80 mm, cannot performing the
operation check in the state that is removed the CD mechanism deck from the
main unit. When performing the operation check, use following fl exible fl at cable.
operation check in the state that is removed the CD mechanism deck from the
main unit. When performing the operation check, use following fl exible fl at cable.
1-846-819-31 CABLE FLEXIBLE FLAT (27 CORE) (Length: 150 mm)
Ref. No.
Description
MEX-GS610BE/GS610BT/N6050BT
16
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
(MEX-GS610BT)
A
*
3
B
C
Satellite radio tuner
(SiriusXM) *
(SiriusXM) *
2
Syntoniseur radio satellite
(SiriusXM) *
(SiriusXM) *
2
Smartphone, iPod/iPhone, USB device
Téléphone intelligent, iPod/iPhone,
périphérique USB
Téléphone intelligent, iPod/iPhone,
périphérique USB
*
2
Depending on the type of car, use an adaptor for a wired
remote control (not supplied).
*
3
not supplied
*
4
For details on installing the microphone, see “Installing the
microphone (
9
)” on the reverse side.
*
5
Whether in use or not, route the microphone input cord
such that it does not interfere with driving. Secure the cord
with a clamp, etc., if it is installed around your feet.
with a clamp, etc., if it is installed around your feet.
*
2
Selon le type de voiture, il pourrait être nécessaire d’utiliser
un adaptateur pour télécommande câblée (non fourni).
*
3
non fourni
*
4
Pour les détails sur l’installation du microphone,
*
5
Qu’il soit en usage ou non, acheminez le cordon d’entrée
du microphone de telle sorte qu’il ne gêne pas votre
conduite. Fixez le cordon à l’aide d’une attache, etc., s’il est
installé autour de vos pieds.
conduite. Fixez le cordon à l’aide d’une attache, etc., s’il est
installé autour de vos pieds.
référez-vous à « Installation du microphone (
9
) » au verso.
*
1
RCA pin cord (not supplied).
*
1
Cordon à broche RCA (non fourni).
Equipment used in illustrations (not supplied)
Appareils utilisés dans les illustrations (non fournis)
Appareils utilisés dans les illustrations (non fournis)
Front speaker
Haut-parleur avant
Haut-parleur avant
Subwoofer
Caisson de graves
Caisson de graves
Power amplifier
Amplificateur de puissance
Amplificateur de puissance
Rear speaker
Haut-parleur arrière
Haut-parleur arrière
*
1
*
1
REM OUT
Max. supply current 0.4 A
Courant max. fourni 0,4 A
Courant max. fourni 0,4 A
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
Blue/white striped
Rayé bleu/blanc
Rayé bleu/blanc
ACC
BATTERY
White
Blanc
Blanc
Green
Vert
Vert
Purple
Violet
Violet
White/black striped
Rayé blanc/noir
Rayé blanc/noir
Gray/black striped
Rayé gris/noir
Rayé gris/noir
Green/black striped
Rayé vert/noir
Rayé vert/noir
Gray
Gris
Gris
Left
Gauche
Gauche
Right
Droit
Droit
Left
Gauche
Gauche
Right
Droit
Droit
Purple/black striped
Rayé violet/noir
Rayé violet/noir
from car antenna
(aerial)
à partir de l’antenne
du véhicule
(aerial)
à partir de l’antenne
du véhicule
Satellite radio tuner
(SiriusXM)*
(SiriusXM)*
3
Syntoniseur radio satellite
(SiriusXM)*
(SiriusXM)*
3
ILLUMINATION
*
6
To connect a smartphone to the main unit, an appropriate
cable (not supplied) is required.
*
7
To connect an iPod/iPhone, use the USB connection cable
for iPod (not supplied).
*
6
Pour raccorder un téléphone intelligent à l’appareil
principal, un câble approprié (non fourni) est requis.
*
7
Pour raccorder un iPod/iPhone, utilisez le câble de
raccordement USB pour iPod (non fourni).
2
Red
Rouge
Rouge
Yellow
Jaune
Jaune
Orange/white striped
Rayé orange/blanc
Rayé orange/blanc
Black
Noir
Noir
6*
4
Ferrite sleeve
Gaine en ferrite
Gaine en ferrite
Smartphone*
6
, iPod/iPhone*
7
,
USB device
Téléphone intelligent*
Téléphone intelligent*
6
, iPod/
iPhone*
7
, périphérique USB
Notes on the control and power supply leads
ˎ REM OUT lead (blue/white striped) supplies +12 V DC when you turn
on the unit.
ˎ When your car has built-in FM/AM antenna (aerial) in the rear/side
glass, connect REM OUT lead (blue/white striped) or the accessory
power supply lead (red) to the power terminal of the existing
antenna (aerial) booster. For details, consult your dealer.
power supply lead (red) to the power terminal of the existing
antenna (aerial) booster. For details, consult your dealer.
ˎ A power antenna (aerial) without a relay box cannot be used with
this unit.
Memory hold connection
When the yellow power supply lead is connected, power will always
be supplied to the memory circuit even when the ignition switch is
turned off.
When the yellow power supply lead is connected, power will always
be supplied to the memory circuit even when the ignition switch is
turned off.
Notes on speaker connection
ˎ Before connecting the speakers, turn the unit off.
ˎ Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
ˎ Do not connect the speaker terminals to the car chassis, or connect
the terminals of the right speakers with those of the left speaker.
ˎ Do not connect the ground (earth) lead of this unit to the negative
(–) terminal of the speaker.
ˎ Do not attempt to connect the speakers in parallel.
ˎ Connect only passive speakers. Connecting active speakers (with
built-in amplifiers) to the speaker terminals may damage the unit.
ˎ To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–) lead
for the right and left speakers.
for the right and left speakers.
ˎ Do not connect the unit’s speaker leads to each other.
English
Cautions
Be sure to install this unit in the dashboard of the
car as the rear side of the unit becomes hot during
use.
car as the rear side of the unit becomes hot during
use.
ˎ This unit is designed for negative ground (earth) 12 V
DC operation only.
ˎ Do not get the leads under a screw, or caught in
moving parts (e.g. seat railing).
ˎ Before making connections, turn the car ignition off
to avoid short circuits.
ˎ Connect the yellow and red power supply leads
only after all other leads have been connected.
ˎ Run all ground (earth) leads to a common ground
(earth) point.
ˎ Be sure to insulate any loose unconnected leads
with electrical tape for safety.
ˎ The use of optical instruments with this product will
increase eye hazard.
Notes on the power supply lead (yellow)
ˎ When connecting this unit in combination with other
stereo components, the connected car circuit’s
rating must be higher than the sum of each
component’s fuse.
rating must be higher than the sum of each
component’s fuse.
ˎ When no car circuits are rated high enough, connect
the unit directly to the battery.
Connection example (
)
Subwoofer Easy Connection (ǵ-C)
You can use a subwoofer without a power amplifier
when it is connected to a rear speaker cord.
You can use a subwoofer without a power amplifier
when it is connected to a rear speaker cord.
Connection diagram (
)
ɞ
To a metal surface of the car
First connect the black ground (earth) lead, then connect the
yellow and red power supply leads.
yellow and red power supply leads.
ɟ
To the power antenna (aerial) control lead or
power supply lead of antenna (aerial) booster
power supply lead of antenna (aerial) booster
Notes
ˎ It is not necessary to connect this lead if there is no power
antenna (aerial) or antenna (aerial) booster, or with a
manually-operated telescopic antenna (aerial).
manually-operated telescopic antenna (aerial).
ˎ When your car has a built-in FM/AM antenna (aerial) in the
rear/side glass, see “Notes on the control and power supply
leads.”
leads.”
To AMP REMOTE IN of an optional power
amplifier
amplifier
This connection is only for amplifiers and a power antenna
(aerial). Connecting any other system may damage the unit.
(aerial). Connecting any other system may damage the unit.
ɠ
To a car’s illumination signal
Be sure to connect the black ground (earth) lead to a metal
surface of the car first.
surface of the car first.
ɡ
To the +12 V power terminal which is energized
in the accessory position of the ignition switch
in the accessory position of the ignition switch
Notes
ˎ If there is no accessory position, connect to the +12 V power
(battery) terminal which is energized at all times.
Be sure to connect the black ground (earth) lead to a metal
surface of the car first.
Be sure to connect the black ground (earth) lead to a metal
surface of the car first.
ˎ When your car has a built-in FM/AM antenna (aerial) in the
rear/side glass, see “Notes on the control and power supply
leads.”
leads.”
ɢ
To the +12 V power terminal which is energized
at all times
at all times
Be sure to connect the black ground (earth) lead to a metal
surface of the car first.
surface of the car first.
*
2
not supplied (ǵ-B)
*
3
Do not connect a speaker in this connection (ǵ-C).
Notes
ˎ Be sure to connect the ground (earth) lead before connecting the
amplifier (ǵ-A).
ˎ The alarm will only sound if the built-in amplifier is used (ǵ-A).
ˎ Be sure to connect a 4 - 8 ohm subwoofer. Do not connect a
speaker to the other rear speaker cord (ǵ-C).
Remarques sur les câbles de commande et d’alimentation
ˎ Le câble REM OUT (rayé bleu/blanc) fournit une alimentation de
+12 V CC lorsque vous mettez l’appareil en marche.
ˎ Lorsque votre voiture est équipée d’une antenne FM/AM intégrée
dans la vitre arrière/latérale, raccordez le câble REM OUT (rayé
bleu/blanc) ou le câble d’alimentation des accessoires (rouge) à la
borne d’alimentation de l’amplificateur d’antenne existant. Pour
plus de détails, consultez votre détaillant.
bleu/blanc) ou le câble d’alimentation des accessoires (rouge) à la
borne d’alimentation de l’amplificateur d’antenne existant. Pour
plus de détails, consultez votre détaillant.
ˎ Une antenne électrique sans boîtier de relais ne peut pas être
utilisée avec cet appareil.
Raccordement pour la conservation de la mémoire
Lorsque le câble d’alimentation jaune est raccordé, le circuit de la
mémoire est alimenté en permanence même si la clé de contact est
sur la position d’arrêt.
Lorsque le câble d’alimentation jaune est raccordé, le circuit de la
mémoire est alimenté en permanence même si la clé de contact est
sur la position d’arrêt.
Remarques sur le raccordement des haut-parleurs
ˎ Avant de raccorder les haut-parleurs, éteignez l’appareil.
ˎ Utilisez des haut-parleurs ayant une impédance de 4 à 8 ohms avec
une capacité électrique adéquate pour éviter de les endommager.
ˎ Ne raccordez pas les bornes du système de haut-parleurs au
châssis de la voiture et ne raccordez pas les bornes du haut-parleur
droit à celles du haut-parleur gauche.
droit à celles du haut-parleur gauche.
ˎ Ne raccordez pas le câble de mise à la masse de cet appareil à la
borne négative (–) du haut-parleur.
ˎ N’essayez pas de raccorder les haut-parleurs en parallèle.
ˎ Raccordez uniquement des haut-parleurs passifs. Le raccordement
de haut-parleurs actifs (avec amplificateurs intégrés) aux bornes
des haut-parleurs peut endommager l’appareil.
des haut-parleurs peut endommager l’appareil.
ˎ Pour éviter tout problème de fonctionnement, n’utilisez pas les
câbles des haut-parleurs intégrés installés dans votre voiture si
l’appareil possède un câble négatif commun (–) pour les
haut-parleurs droit et gauche.
l’appareil possède un câble négatif commun (–) pour les
haut-parleurs droit et gauche.
ˎ Ne raccordez pas entre eux les câbles des haut-parleurs de
l’appareil.
Français
Mises en garde
Installez cet appareil sur le tableau de bord de la
voiture, car l’arrière de l’appareil chauffe en cours
d’utilisation.
voiture, car l’arrière de l’appareil chauffe en cours
d’utilisation.
ˎ Cet appareil est exclusivement conçu pour
fonctionner sur une tension de 12 V CC avec masse
négative.
négative.
ˎ Évitez de fixer des vis sur les câbles ou de coincer
ceux-ci dans des pièces mobiles (par exemple,
armature de siège).
armature de siège).
ˎ Avant d’effectuer les raccordements, coupez le
moteur pour éviter un court-circuit.
ˎ Raccordez les câbles d’alimentation jaune et rouge
seulement après avoir terminé tous les autres
raccordements.
raccordements.
ˎ Rassemblez tous les câbles de mise à la masse en
un point de masse commun.
ˎ Pour des raisons de sécurité, veillez à isoler avec du
ruban isolant tout câble libre non raccordé.
ˎ L’utilisation d’instruments optiques avec ce produit
augmente les risques pour les yeux.
Remarques sur le câble d’alimentation (jaune)
ˎ Lorsque cet appareil est raccordé à d’autres
éléments stéréo, la valeur nominale du circuit de la
voiture raccordé doit être supérieure à la somme des
fusibles de chaque élément.
voiture raccordé doit être supérieure à la somme des
fusibles de chaque élément.
ˎ Si aucun circuit de la voiture n’est assez puissant,
raccordez directement l’appareil à la batterie.
Schéma de raccordement (
)
ɞ
À un point métallique de la voiture
Branchez d’abord le câble de mise à la masse noir et, ensuite, les
câbles d’alimentation jaune et rouge.
câbles d’alimentation jaune et rouge.
ɟ
Au câble de commande d’antenne électrique ou
au câble d’alimentation de l’amplificateur
d’antenne
au câble d’alimentation de l’amplificateur
d’antenne
Remarques
ˎ Il n’est pas nécessaire de raccorder ce câble s’il n’y a pas
d’antenne électrique ni d’amplificateur d’antenne, ou avec une
antenne télescopique manuelle.
antenne télescopique manuelle.
ˎ Si votre voiture est équipée d’une antenne FM/AM intégrée
dans la vitre arrière/latérale, voir « Remarques sur les câbles de
commande et d’alimentation ».
commande et d’alimentation ».
Au niveau de AMP REMOTE IN de l’amplificateur
de puissance en option
de puissance en option
Ce raccordement s’applique uniquement aux amplificateurs et à
une antenne électrique. Le branchement de tout autre système
risque d’endommager l’appareil.
une antenne électrique. Le branchement de tout autre système
risque d’endommager l’appareil.
ɠ
Vers le connecteur du signal d’éclairage de la
voiture
voiture
Raccordez d’abord le câble de mise à la masse noir à un point
métallique du véhicule.
métallique du véhicule.
ɡ
À la borne d’alimentation +12 V qui est
alimentée quand la clé de contact est sur la
position accessoires
alimentée quand la clé de contact est sur la
position accessoires
Remarques
ˎ S’il n’y a pas de position accessoires, raccordez la borne
d’alimentation (batterie) +12 V qui est alimentée en
permanence.
Raccordez d’abord le câble de mise à la masse noir à un point
métallique du véhicule.
permanence.
Raccordez d’abord le câble de mise à la masse noir à un point
métallique du véhicule.
ˎ Si votre voiture est équipée d’une antenne FM/AM intégrée
dans la vitre arrière/latérale, voir « Remarques sur les câbles de
commande et d’alimentation ».
commande et d’alimentation ».
ɢ
À la borne d’alimentation +12 V qui est
alimentée en permanence
alimentée en permanence
Raccordez d’abord le câble de mise à la masse noir à un point
métallique du véhicule.
métallique du véhicule.
Exemple de raccordement (
)
Raccordement facile d’un caisson de graves (ǵ-C)
Vous pouvez utiliser un caisson de graves sans
amplificateur de puissance lorsque vous effectuez le
raccordement à un cordon de haut-parleur arrière.
Vous pouvez utiliser un caisson de graves sans
amplificateur de puissance lorsque vous effectuez le
raccordement à un cordon de haut-parleur arrière.
*
2
non fourni (ǵ-B)
*
3
Ne raccordez pas un haut-parleur avec cette connexion (ǵ-C).
Remarques
ˎ Raccordez d’abord le câble de mise à la masse avant de raccorder
l’amplificateur (ǵ-A).
ˎ L’alarme est émise uniquement lorsque l’amplificateur intégré est
utilisé (ǵ-A).
ˎ Assurez-vous de raccorder un caisson de graves de 4 - 8 ohms. Ne
raccordez pas de haut-parleur à l’autre cordon de haut-parleur
arrière (ǵ-C).
arrière (ǵ-C).
Click on the first or last page to see other MEX-GS610BE / MEX-GS610BT / MEX-N6050BT service manuals if exist.