Sony MEX-DV1500U / MEX-DV1505U / MEX-DV150UE Service Manual ▷ View online
MEX-DV150UE/DV1500U/DV1505U
9
1
2
3
A
TOYOTA
to dashboard/center console
al tablero o consola central
al tablero o consola central
Bracket
Soporte
Soporte
Bracket
Soporte
Soporte
B
NISSAN
to dashboard/center console
al tablero o consola central
al tablero o consola central
Bracket
Soporte
Soporte
Bracket
Soporte
Soporte
Existing parts supplied with your car
Piezas existentes suministradas con su automóvil
Piezas existentes suministradas con su automóvil
A
B
1
2
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
5 × 8 mm
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
5 × 8 mm
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
5 × 8 mm
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
5 × 8 mm
Precautions
• Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
• Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in
direct sunlight or near heater ducts.
direct sunlight or near heater ducts.
• Use only the supplied mounting hardware for a safe
and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake
cord
cord
Be sure to connect the parking cord (Light green) of
to the parking brake switch cord. The mounting position
of the parking brake switch cord depends on your car.
Consult your car dealer or your nearest Sony dealer for
further details.
of the parking brake switch cord depends on your car.
Consult your car dealer or your nearest Sony dealer for
further details.
Removing the protection collar
and the bracket
and the bracket
Before installing the unit, remove the protection
collar
collar
and the bracket from the unit.
1
Remove the protection collar
.
Pinch both edges of the protection collar
, then
pull it out.
2
Remove the bracket
.
Insert both release keys together between
the unit and the bracket
until they click.
Pull down the bracket , then pull up the unit
to separate.
Mounting example
Installation in the dashboard
Notes
• Bend these claws outward for a tight fit, if necessary (
• Bend these claws outward for a tight fit, if necessary (
-2).
• Make sure that the 4 catches on the protection collar
are
properly engaged in the slots of the unit (
-3).
Mounting the unit in a Japanese
car
car
You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your Sony dealer.
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws
To prevent malfunction, install only with the supplied screws
.
How to detach and attach the
front panel
front panel
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press
.
Press
, and pull it off towards you.
-B To attach
Engage part
of the front panel with part of the unit,
as illustrated, and push the left side into position until it
clicks.
clicks.
Warning if your car’s ignition
has no ACC position
has no ACC position
Be sure to set the Auto Off function. For details, see the
supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
until the display disappears each time you turn
the ignition off.
the ignition off.
RESET button
When the installation and connections are completed,
be sure to press the RESET button with a ball-point pen,
etc., after detaching the front panel.
be sure to press the RESET button with a ball-point pen,
etc., after detaching the front panel.
Existing parts supplied with your car
Piezas existentes suministradas con su automóvil
Piezas existentes suministradas con su automóvil
Foot brake type
Tipo de freno de pedal
Tipo de freno de pedal
Parking brake switch cord
Cable de conmutación del
freno de estacionamiento
Cable de conmutación del
freno de estacionamiento
Hand brake type
Tipo de freno manual
Tipo de freno manual
Parking brake switch cord
Cable de conmutación del
freno de estacionamiento
Cable de conmutación del
freno de estacionamiento
Face the hook inwards.
El gancho debe encontrarse
en la parte interior.
en la parte interior.
182 mm
53 mm
Claws
Uñas
Uñas
Dashboard
Tablero
Tablero
Fire wall
Cortafuegos
Cortafuegos
MEX-DV150UE/DV1500U/DV1505U
10
(DV150UE/DV1500U: AEP and UK models)
Cautions
• This unit is designed for negative ground (earth) 12 V DC operation
only.
• Do not get the leads under a screw, or caught in moving parts (e.g.
seat railing).
• Before making connections, turn the car ignition off to avoid short
circuits.
• Connect the power supply lead
to the unit and speakers before
connecting it to the auxiliary power connector.
• Run all ground (earth) leads to a common ground (earth)
point.
• Be sure to insulate any loose unconnected leads with electrical tape
for safety.
Notes on the power supply lead (yellow)
• When connecting this unit in combination with other stereo
• When connecting this unit in combination with other stereo
components, the connected car circuit’s rating must be higher than
the sum of each component’s fuse.
the sum of each component’s fuse.
• When no car circuits are rated high enough, connect the unit directly
to the battery.
Connection example
Notes (
-B)
• Be sure to connect the ground (earth) lead before connecting the amplifier.
• The alarm will only sound if the built-in amplifier is used.
• The alarm will only sound if the built-in amplifier is used.
Connection diagram
To AMP REMOTE IN of an optional power amplifier
This connection is only for amplifiers. Connecting any other system may
damage the unit.
damage the unit.
To the parking brake switch cord
Warning
If you have a power antenna (aerial) without a relay box, connecting
this unit with the supplied power supply lead
this unit with the supplied power supply lead
may damage the
antenna (aerial).
Notes on the control and power supply leads
• The power antenna (aerial) control lead (blue) supplies +12 V DC when you
• The power antenna (aerial) control lead (blue) supplies +12 V DC when you
turn on the tuner, or when you activate the AF (Alternative Frequency) or TA
(Traffic Announcement) function.
(Traffic Announcement) function.
• When your car has built-in FM/MW/LW antenna (aerial) in the rear/side glass,
connect the power antenna (aerial) control lead (blue) or the accessory power
supply lead (red) to the power terminal of the existing antenna (aerial) booster.
For details, consult your dealer.
supply lead (red) to the power terminal of the existing antenna (aerial) booster.
For details, consult your dealer.
• A power antenna (aerial) without a relay box cannot be used with this unit.
Memory hold connection
When the yellow power supply lead is connected, power will always be supplied
to the memory circuit even when the ignition switch is turned off.
When the yellow power supply lead is connected, power will always be supplied
to the memory circuit even when the ignition switch is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with adequate power
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with adequate power
handling capacities to avoid its damage.
• Do not connect the speaker terminals to the car chassis, or connect the
terminals of the right speakers with those of the left speaker.
• Do not connect the ground (earth) lead of this unit to the negative (–) terminal
of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active speakers (with built-in
• Connect only passive speakers. Connecting active speakers (with built-in
amplifiers) to the speaker terminals may damage the unit.
• To avoid a malfunction, do not use the built-in speaker leads installed in
your car if the unit shares a common negative (–) lead for the right and left
speakers.
speakers.
• Do not connect the unit’s speaker leads to each other.
Notes on connection
• If speaker and amplifier are not connected correctly, “FAILURE” appears in
• If speaker and amplifier are not connected correctly, “FAILURE” appears in
the display. In this case, make sure the speaker and amplifier are connected
correctly.
correctly.
• If you are to use the monitor for the rear seats, connect the parking brake
switch cord to the ground (earth).
Negative polarity positions 2, 4, 6 and 8 have striped leads.
An den negativ gepolten Positionen 2, 4, 6 und 8 befinden sich gestreifte Adern.
Les positions de polarité négative 2, 4, 6 et 8 sont dotées de cordons rayés.
Le posizioni a polarità negativa 2, 4, 6 e 8 hanno cavi rigati.
De posities voor negatieve polariteit (2, 4, 6 en 8) hebben gestreepte kabels.
An den negativ gepolten Positionen 2, 4, 6 und 8 befinden sich gestreifte Adern.
Les positions de polarité négative 2, 4, 6 et 8 sont dotées de cordons rayés.
Le posizioni a polarità negativa 2, 4, 6 e 8 hanno cavi rigati.
De posities voor negatieve polariteit (2, 4, 6 en 8) hebben gestreepte kabels.
1
Purple
Violett
Mauve
Violett
Mauve
Viola
Paars
+
Speaker, Rear, Right
Lautsprecher hinten rechts
Haut-parleur, arrière, droit
Diffusore, posteriore, destro
Luidspreker, achter, rechts
5
White
Weiß
Blanc
Bianco
Wit
+
Speaker, Front, Left
Lautsprecher vorne links
Haut-parleur, avant, gauche
Diffusore, anteriore, sinistro
Luidspreker, voor, links
2
–
Speaker, Rear, Right
Lautsprecher hinten rechts
Haut-parleur, arrière, droit
Diffusore, posteriore, destro
Luidspreker, achter, rechts
6
–
Speaker, Front, Left
Lautsprecher vorne links
Haut-parleur, avant, gauche
Diffusore, anteriore, sinistro
Luidspreker, voor, links
3
Gray
Grau
Grau
Gris
Grigio
Grijs
+
Speaker, Front, Right
Lautsprecher vorne rechts
Haut-parleur, avant, droit
Diffusore, anteriore, destro
Luidspreker, voor, rechts
7
Green
Grün
Vert
Verde
Groen
+
Speaker, Rear, Left
Lautsprecher hinten links
Haut-parleur, arrière, gauche
Diffusore, posteriore, sinistro
Luidspreker, achter, links
4
–
Speaker, Front, Right
Lautsprecher vorne rechts
Haut-parleur, avant, droit
Diffusore, anteriore, destro
Luidspreker, voor, rechts
8
–
Speaker, Rear, Left
Lautsprecher hinten links
Haut-parleur, arrière, gauche
Diffusore, posteriore, sinistro
Luidspreker, achter, links
VIDEO OUT
FRONT
AUDIO OUT
REAR / SUB
AUDIO OUT
A
B
* not supplied
nicht mitgeliefert
non fourni
non in dotazione
niet bijgeleverd
non fourni
non in dotazione
niet bijgeleverd
Monitor*
Monitor*
Monitor*
Moniteur*
Monitor*
Monitor*
Monitor*
Monitor*
Monitor*
Monitor*
Moniteur*
Monitor*
Monitor*
Monitor*
* not supplied
nicht mitgeliefert
non fourni
non in dotazione
niet bijgeleverd
non fourni
non in dotazione
niet bijgeleverd
*
1
Note for the antenna (aerial) connecting
If your car antenna (aerial) is an
ISO (International Organization for
Standardization) type, use the supplied
adaptor
If your car antenna (aerial) is an
ISO (International Organization for
Standardization) type, use the supplied
adaptor
to connect it. First connect the
car antenna (aerial) to the supplied adaptor,
then connect it to the antenna (aerial) jack of
the master unit.
then connect it to the antenna (aerial) jack of
the master unit.
*
2
RCA pin cord (not supplied)
*
3
For details on connecting to the parking
brake switch cord, see “Connecting the
parking brake cord (
brake switch cord, see “Connecting the
parking brake cord (
)” on the reverse side.
*
4
AUDIO OUT can be switched SUB or REAR.
For details, see the supplied Operating
Instructions.
For details, see the supplied Operating
Instructions.
*
5
Auxiliary device such as hideaway
navigation device, TV tuner box, etc.
navigation device, TV tuner box, etc.
*
1
Hinweis zum Anschließen der Antenne
Wenn Ihre Fahrzeugantenne der ISO-Norm
(Internationale Normungsgemeinschaft)
entspricht, schließen Sie sie mithilfe des
mitgelieferten Adapters
Wenn Ihre Fahrzeugantenne der ISO-Norm
(Internationale Normungsgemeinschaft)
entspricht, schließen Sie sie mithilfe des
mitgelieferten Adapters
an. Verbinden
Sie zuerst die Fahrzeugantenne mit dem
mitgelieferten Adapter und verbinden Sie
diesen dann mit der Antennenbuchse des
Hauptgeräts.
mitgelieferten Adapter und verbinden Sie
diesen dann mit der Antennenbuchse des
Hauptgeräts.
*
2
Cinchkabel (nicht mitgeliefert)
*
3
Informationen zum Anschließen der
Parkbremsenschaltleitung finden Sie unter
„Anschließen der Parkbremsenleitung (
Parkbremsenschaltleitung finden Sie unter
„Anschließen der Parkbremsenleitung (
)“
auf der Rückseite.
*
4
AUDIO OUT kann zwischen SUB und REAR
umgeschaltet werden. Näheres hierzu finden
Sie in der Bedienungsanleitung.
umgeschaltet werden. Näheres hierzu finden
Sie in der Bedienungsanleitung.
*
5
Zusätzliches Gerät wie ein verstecktes
Navigationsgerät, ein Fernsehtuner usw.
Navigationsgerät, ein Fernsehtuner usw.
*
1
Remarque sur le raccordement de l’antenne
Si votre antenne de voiture est de type
ISO (Organisation internationale de
normalisation), utilisez l’adaptateur fourni
Si votre antenne de voiture est de type
ISO (Organisation internationale de
normalisation), utilisez l’adaptateur fourni
pour la raccorder. Raccordez d’abord
l’antenne de voiture à l’adaptateur fourni et,
ensuite, à la prise d’antenne de l’appareil
principal.
l’antenne de voiture à l’adaptateur fourni et,
ensuite, à la prise d’antenne de l’appareil
principal.
*
2
Cordon à broche RCA (non fourni)
*
3
Pour plus de détails sur le raccordement du
cordon du capteur du frein à main, reportez-
vous à la section « Raccordement du cordon
du frein à main (
cordon du capteur du frein à main, reportez-
vous à la section « Raccordement du cordon
du frein à main (
) » au verso.
*
4
AUDIO OUT peut être commuté sur SUB
ou REAR. Pour obtenir plus de détails,
reportez-vous au mode d’emploi.
ou REAR. Pour obtenir plus de détails,
reportez-vous au mode d’emploi.
*
5
Appareil auxiliaire comme un appareil de
navigation dissimulé, un tuner TV, etc.
navigation dissimulé, un tuner TV, etc.
*
1
Nota per il collegamento dell’antenna
Se l’antenna dell’auto è di tipo
ISO (International Organization for
Standardization), utilizzare l’adattatore
Se l’antenna dell’auto è di tipo
ISO (International Organization for
Standardization), utilizzare l’adattatore
in dotazione per collegarla. Collegare prima
l’antenna della macchina all’adattatore
in dotazione, quindi collegarla alla presa
dell’antenna dell’apparecchio principale.
l’antenna della macchina all’adattatore
in dotazione, quindi collegarla alla presa
dell’antenna dell’apparecchio principale.
*
2
Cavo a piedini RCA (non in dotazione)
*
3
Per ulteriori informazioni sulla modalità di
collegamento del cavo di commutazione
del freno a mano, consultare la sezione
“Collegamento del cavo del freno a mano
(
collegamento del cavo di commutazione
del freno a mano, consultare la sezione
“Collegamento del cavo del freno a mano
(
)” sul lato opposto.
*
4
AUDIO OUT può essere impostato su
SUB o su REAR. Per ulteriori informazioni,
consultare il manuale di istruzioni per l’uso.
SUB o su REAR. Per ulteriori informazioni,
consultare il manuale di istruzioni per l’uso.
*
5
Dispositivo ausiliare quale un dispositivo di
navigazione hideaway, un sintonizzatore TV
e così via.
navigazione hideaway, un sintonizzatore TV
e così via.
*
1
Opmerking bij de antenne-aansluiting
Indien uw auto is uitgerust met een antenne
van het type ISO (International Organization
for Standardization), moet u die aansluiten
met behulp van de bijgeleverde adapter
Indien uw auto is uitgerust met een antenne
van het type ISO (International Organization
for Standardization), moet u die aansluiten
met behulp van de bijgeleverde adapter
. Sluit eerst de auto-antenne aan op
de bijgeleverde adapter en vervolgens de
antennestekker op het hoofdtoestel.
de bijgeleverde adapter en vervolgens de
antennestekker op het hoofdtoestel.
*
2
Tulpstekkersnoer (niet bijgeleverd)
*
3
Zie “Parkeerremkabel aansluiten (
)” op
de achterkant voor meer informatie over
het aansluiten op het schakelsnoer van de
parkeerrem.
het aansluiten op het schakelsnoer van de
parkeerrem.
*
4
AUDIO OUT kan worden ingesteld op SUB
of REAR. Raadpleeg de gebruiksaanwijzing
voor meer informatie.
of REAR. Raadpleeg de gebruiksaanwijzing
voor meer informatie.
*
5
Randapparaat, zoals een verborgen
navigatieapparaat, televisietuner, enzovoort.
navigatieapparaat, televisietuner, enzovoort.
Positions 1, 2, 3 and 6 do not have pins.
An Position 1, 2, 3 und 6 befinden sich keine Stifte.
Les positions 1, 2, 3 et 6 ne comportent pas de broches.
Le posizioni 1, 2, 3 e 6 non hanno piedini.
De posities 1, 2, 3 en 6 hebben geen pins.
An Position 1, 2, 3 und 6 befinden sich keine Stifte.
Les positions 1, 2, 3 et 6 ne comportent pas de broches.
Le posizioni 1, 2, 3 e 6 non hanno piedini.
De posities 1, 2, 3 en 6 hebben geen pins.
4
Yellow
Gelb
Jaune
Giallo
Giallo
Geel
continuous power supply
permanente Stromversorgung
alimentation continue
alimentazione continua
continu voeding
7
Red
Rot
Rouge
Rosso
Rosso
Rood
switched power supply
geschaltete Stromversorgung
alimentation commutée
alimentazione commutata
geschakelde voeding
5
Blue
Blau
Bleu
Blau
Bleu
Blu
Blauw
power antenna (aerial) control
Motorantennensteuerung
antenne électrique
comando dell’antenna elettrica
automatische antenne
8
Black
Schwarz
Noir
Nero
Zwart
ground (earth)
Masse
masse
masse
terra
aarding
L
R
AUX
IN
VIDEO
OUT
FRONT
AUDIO OUT
REAR / SUB
AUDIO OUT
*
4
1
3
5
7
2
4
6
8
5
7
4
8
VIDEO OUT
AUX IN
*
1
from car antenna (aerial)
von Autoantenne
de l’antenne de la voiture
dall’antenna dell’auto
van een auto-antenne
von Autoantenne
de l’antenne de la voiture
dall’antenna dell’auto
van een auto-antenne
Fuse (10 A)
Sicherung (10 A)
Fusible (10 A)
Fusibile (10 A)
Zekering (10 A)
Sicherung (10 A)
Fusible (10 A)
Fusibile (10 A)
Zekering (10 A)
Blue/white striped
Blauweiß gestreift
Rayé bleu/blanc
Rigato blu e bianco
Blauw/wit gestreept
Blauweiß gestreift
Rayé bleu/blanc
Rigato blu e bianco
Blauw/wit gestreept
AMP REM
from the car’s power connector
vom Stromanschluss des Fahrzeugs
du connecteur d’alimentation de la voiture
dal connettore di alimentazione dell’auto
van de autovoedingsaansluiting
vom Stromanschluss des Fahrzeugs
du connecteur d’alimentation de la voiture
dal connettore di alimentazione dell’auto
van de autovoedingsaansluiting
See “Power connection diagram” on the reverse side for details.
Näheres dazu finden Sie im „Stromanschlussdiagramm“. Blättern
Sie dazu bitte um.
Sie dazu bitte um.
Voir le « Schéma de raccordement d’alimentation » au verso pour
plus de détails.
plus de détails.
Per ulteriori informazioni, vedere “Diagramma dei collegamenti di
alimentazione” che si trova sul retro.
alimentazione” che si trova sul retro.
Zie "Voedingsaansluitschema" op de achterkant voor meer details.
Max. supply current 0.3 A
max. Versorgungsstrom 0,3 A
Courant d’alimentation maximum 0,3 A
Alimentazione massima fornita 0,3 A
Max. voedingsstroom 0,3 A
max. Versorgungsstrom 0,3 A
Courant d’alimentation maximum 0,3 A
Alimentazione massima fornita 0,3 A
Max. voedingsstroom 0,3 A
from the car’s speaker connector
vom Lautsprecheranschluss des Fahrzeugs
du connecteur de haut-parleur de la voiture
dal connettore del diffusore dell’auto
van de autoluidsprekeraansluiting
vom Lautsprecheranschluss des Fahrzeugs
du connecteur de haut-parleur de la voiture
dal connettore del diffusore dell’auto
van de autoluidsprekeraansluiting
*
5
Monitor (not supplied)
Monitor (nicht mitgeliefert)
Moniteur (non fourni)
Monitor (non in dotazione)
Monitor (niet bijgeleverd)
Monitor (nicht mitgeliefert)
Moniteur (non fourni)
Monitor (non in dotazione)
Monitor (niet bijgeleverd)
Light green
Hellgrün
Vert clair
Verde chiaro
Lichtgroen
Hellgrün
Vert clair
Verde chiaro
Lichtgroen
*
2
*
3
PARKING BRAKE
*
2
*
2
MEX-DV150UE/DV1500U/DV1505U
11
Auxiliary power connector
Hilfsstromanschluss
Connecteur d’alimentation auxiliaire
Connettore di alimentazione ausiliaria
Hulpvoedingsaansluiting
Red
Rot
Rouge
Rosso
Rood
Rot
Rouge
Rosso
Rood
Red
Rot
Rouge
Rosso
Rood
Rot
Rouge
Rosso
Rood
Yellow
Gelb
Jaune
Giallo
Geel
Gelb
Jaune
Giallo
Geel
Yellow
Gelb
Jaune
Giallo
Geel
Gelb
Jaune
Giallo
Geel
Red
Rot
Rouge
Rosso
Rood
Rot
Rouge
Rosso
Rood
Red
Rot
Rouge
Rosso
Rood
Rot
Rouge
Rosso
Rood
Yellow
Gelb
Jaune
Giallo
Geel
Gelb
Jaune
Giallo
Geel
Yellow
Gelb
Jaune
Giallo
Geel
Gelb
Jaune
Giallo
Geel
Red
Rot
Rouge
Rosso
Rood
Rot
Rouge
Rosso
Rood
Red
Rot
Rouge
Rosso
Rood
Rot
Rouge
Rosso
Rood
Yellow
Gelb
Jaune
Giallo
Geel
Gelb
Jaune
Giallo
Geel
Yellow
Gelb
Jaune
Giallo
Geel
Gelb
Jaune
Giallo
Geel
Power connection diagram
Auxiliary power connector may vary depending on the car. Check your
car’s auxiliary power connector diagram to make sure the connections
match correctly. There are three basic types (illustrated below). You
may need to switch the positions of the red and yellow leads in the car
stereo’s power supply lead.
After matching the connections and switched power supply leads
correctly, connect the unit to the car’s power supply. If you have any
questions and problems connecting your unit that are not covered in
this manual, please consult the car dealer.
car’s auxiliary power connector diagram to make sure the connections
match correctly. There are three basic types (illustrated below). You
may need to switch the positions of the red and yellow leads in the car
stereo’s power supply lead.
After matching the connections and switched power supply leads
correctly, connect the unit to the car’s power supply. If you have any
questions and problems connecting your unit that are not covered in
this manual, please consult the car dealer.
Precautions
• Choose the installation location carefully so that the unit will not
interfere with normal driving operations.
• Avoid installing the unit in areas subject to dust, dirt, excessive
vibration, or high temperature, such as in direct sunlight or near
heater ducts.
heater ducts.
• Use only the supplied mounting hardware for a safe and secure
installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake cord
Be sure to connect the parking cord (Light green) of
to the parking
brake switch cord. The mounting position of the parking brake switch
cord depends on your car. Consult your car dealer or your nearest Sony
dealer for further details.
cord depends on your car. Consult your car dealer or your nearest Sony
dealer for further details.
Removing the protection collar and the
bracket
bracket
Before installing the unit, remove the protection collar
and the bracket
from the unit.
1
Remove the protection collar
.
Pinch both edges of the protection collar
, then pull it out.
2
Remove the bracket
.
Insert both release keys together between the unit and
the bracket
until they click.
Pull down the bracket , then pull up the unit to separate.
Mounting example
Installation in the dashboard
Notes
• Bend these claws outward for a tight fit, if necessary (
• Bend these claws outward for a tight fit, if necessary (
-2).
• Make sure that the 4 catches on the protection collar
are properly engaged
in the slots of the unit (
-3).
How to detach and attach the front panel
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press
. Press , and
pull it off towards you.
-B To attach
Engage part
of the front panel with part of the unit, as illustrated,
and push the left side into position until it clicks.
Warning if your car’s ignition has no ACC
position
position
Be sure to set the Auto Off function. For details, see the supplied
Operating Instructions.
The unit will shut off completely and automatically in the set time after
the unit is turned off, which prevents battery drain.
If you do not set the Auto Off function, press and hold
Operating Instructions.
The unit will shut off completely and automatically in the set time after
the unit is turned off, which prevents battery drain.
If you do not set the Auto Off function, press and hold
until the
display disappears each time you turn the ignition off.
RESET button
When the installation and connections are completed, be sure to press
the RESET button with a ball-point pen, etc., after detaching the front
panel.
the RESET button with a ball-point pen, etc., after detaching the front
panel.
1
2
1
2
3
A
B
the car without ACC position
Fahrzeug ohne Zubehörposition (ACC oder I)
Véhicule sans position ACC
Auto priva della posizione ACC
Auto zonder ACC-positie
4
Yellow
Gelb
Jaune
Giallo
Giallo
Geel
continuous power supply
permanente Stromversorgung
alimentation continue
alimentazione continua
continu voeding
7
Red
Rot
Rouge
Rosso
Rosso
Rood
switched power supply
geschaltete Stromversorgung
alimentation commutée
alimentazione commutata
geschakelde voeding
4
Yellow
Gelb
Jaune
Giallo
Giallo
Geel
switched power supply
geschaltete Stromversorgung
alimentation commutée
alimentazione commutata
geschakelde voeding
7
Red
Rot
Rouge
Rosso
Rosso
Rood
continuous power supply
permanente Stromversorgung
alimentation continue
alimentazione continua
continu voeding
Foot brake type
Fußbremse
Type pédale de frein
Freno a pedale
Type voetrem
Fußbremse
Type pédale de frein
Freno a pedale
Type voetrem
Hand brake type
Handbremse
Type frein à main
Freno a mano
Type handrem
Handbremse
Type frein à main
Freno a mano
Type handrem
Parking brake switch cord
Parkbremsenschaltleitung
Cordon du capteur du frein
à main
Cavo di commutazione del
freno a mano
Schakelsnoer van de
parkeerrem
Parkbremsenschaltleitung
Cordon du capteur du frein
à main
Cavo di commutazione del
freno a mano
Schakelsnoer van de
parkeerrem
Parking brake switch cord
Parkbremsenschaltleitung
Cordon du capteur du frein à main
Cavo di commutazione del freno
a mano
Schakelsnoer van de parkeerrem
Parkbremsenschaltleitung
Cordon du capteur du frein à main
Cavo di commutazione del freno
a mano
Schakelsnoer van de parkeerrem
Face the hook inwards.
Der Haken muss nach innen
weisen.
weisen.
Tournez le crochet vers
l’intérieur.
l’intérieur.
Con il gancetto rivolto verso
l’interno.
l’interno.
Het haakje moet naar binnen
wijzen.
wijzen.
182 mm
53 mm
Claws
Klammern
Griffes
Morsetti
Klemhaken
Klammern
Griffes
Morsetti
Klemhaken
Dashboard
Armaturenbrett
Tableau de bord
Cruscotto
Dashboard
Armaturenbrett
Tableau de bord
Cruscotto
Dashboard
Fire wall
Motorraumtrennwand
Paroi ignifuge
Parete tagliafiamma
Brandschot
Motorraumtrennwand
Paroi ignifuge
Parete tagliafiamma
Brandschot
MEX-DV150UE/DV1500U/DV1505U
12
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SET
3-2. SUB PANEL COMPLETE ASSY
(Page
(Page
12)
3-3. DVD MECHANISM DECK BLOCK
(Page
(Page
13)
3-4. DC FAN (25X25) (M850),
MAIN
MAIN
BOARD
(Page
13)
3-5. CHASSIS (T612Z) SUB ASSY,
SENSOR
SENSOR
BOARD
(Page
14)
3-7. SERVO BOARD
(Page
(Page
15)
3-6. CHASSIS (OP, ZA) COMPLETE ASSY
(Page
(Page
14)
FRONT PANEL SECTION
Note:
Note:
Illustration of disassembly is omitted.
Note: Follow the disassembly procedure in the numerical order given.
3-2. SUB PANEL COMPLETE ASSY
screw
(PTT2.6
(PTT2.6
× 6)
two screws
(PTT2.6
(PTT2.6
× 6)
two bosses
two bosses
cover block
two claws
three claws
two claws
sub panel complete assy
Click on the first or last page to see other MEX-DV1500U / MEX-DV1505U / MEX-DV150UE service manuals if exist.