Sony CDX-GT710 / CDX-GT71W / CDX-GT760 Service Manual ▷ View online
5
CDX-GT71W/GT710/GT760
SECTION 1
SERVICE NOTE
SERVO BOARD
CN2
CN2
MAIN BOARD
CNP301
CNP301
J-2502-076-1
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
as shown below.
• Connect the MAIN board (CNP301) and the SERVO board (CN2)
with the extension cable (Part No. J-2502-076-1).
NOTE FOR THE OPENING OF THE FRONT PANEL
In this set, the front panel is lowered to below the bottom face when
it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board (A-1177-362-A) should
be replaced since any parts in the SERVO board cannot be repaired.
be replaced since any parts in the SERVO board cannot be repaired.
stand
6
CDX-GT71W/GT710/GT760
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
• LOCATION OF CONTROLS
• CDX-GT71W
• CDX-GT71W
• CDX-GT710: US, Canadian model
8
Location of controls and basic operations
Main unit
Card remote commander
RM-X152
RM-X152
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
SEEK +/– control
CD/MD*
1
:
To skip tracks (press up/down); skip tracks
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
B
MODE button 10, 13
To select the radio band (FM/AM); select the
SAT tuner band (mode)*
SAT tuner band (mode)*
2
; select the unit*
3
.
C
Volume control dial
To adjust volume.
SOUND button
To enter sound setting.
ENTER button
To apply a menu setting.
D
Receptor for the card remote
commander
commander
E
MENU button
To enter menu.
F
IMAGE button
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
MODE
MENU
DSPL
SCRL
OFF
AUX
REP
SHUF
PAUSE
BBE MP
GP/ALBM
LIST
IMAGE
SOURCE
SEEK
SEEK
PUSH SOUND / ENTER
ANGLE
1
2
3
4
5
6
CDX-GT71W
1
2
3
7
8
9
q;
qa qs
qdqf
qg
qh qj
qk
5
4
6
OFF
DSPL
REP
SHUF
MENU
SCRL
SOURCE
SOUND
MODE
PAUSE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
ENTER
LIST/
CAT
qs
5
wd
qj
2
w;
ql
qf
ws
wa
wh
wg
wf
qh
9
G
RESET button
(Location behind the front
panel)
4
H
Disc slot 6
To insert the disc.
I
Display window
J Z
(eject)/ANGLE button 7
To eject the disc/slide down the front panel
(press); angle the front panel in 3 positions
(press and hold).
(press); angle the front panel in 3 positions
(press and hold).
K
(front panel release) button 5
L
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/AUX/SAT*
2
).
M
LIST button 11, 14
To list up.
N
DSPL (display) button 10
To change display items.
O
Number buttons
CD/MD*
1
:
(1):
REP 10, 14
(2):
SHUF 10, 14
(3)/(4):
GP
*
4
/ALBM
*
5
–/+
To skip albums (press); skip albums
continuously (press and hold).*
continuously (press and hold).*
6
(5):
BBE MP 2
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
“BBE MP on.” To cancel, set “BBE MP
off.”
(6):
PAUSE
*
7
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
P
SCRL (scroll) button 10
To scroll the display item.
Q
OFF button
To power off; stop the source.
R
AUX input jack 13
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql
ENTER button
To complete a setting.
w; <
/
,
(SEEK –/+) buttons
CD/MD*
1
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
wa
VOL (volume) +/– button
To adjust volume.
ws
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wd
SOUND button
To enter sound setting.
wf
LIST/CAT
*
2
button 11, 14
To list up.
wg M
/
m
(+/–) buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
skip groups continuously (press and hold).
wh
Number buttons
CD/MD*
1
:
(1):
REP 10, 14
(2):
SHUF 10, 14
(6):
PAUSE
*
7
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
*1
When an MD changer is connected.
*2
When the SAT tuner is connected.
*3
When a CD/MD changer is connected.
*4
When an ATRAC CD is played.
*5
When an MP3/WMA/AAC is played.
*6
If the changer is connected, the operation is
different, see page 14.
different, see page 14.
*7
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
8
Location of controls and basic operations
Main unit
Card remote commander
RM-X152
RM-X152
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
SEEK +/– control
CD/MD*
1
:
To skip tracks (press up/down); skip tracks
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
B
MODE button 10, 13
To select the radio band (FM/AM); select the
SAT tuner band (mode)*
SAT tuner band (mode)*
2
; select the unit*
3
.
C
Volume control dial
To adjust volume.
SOUND button
To enter sound setting.
ENTER button
To apply a menu setting.
D
Receptor for the card remote
commander
commander
E
MENU button
To enter menu.
F
IMAGE button
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
MODE
MENU
DSPL
SCRL
OFF
AUX
REP
SHUF
PAUSE
BBE MP
GP/ALBM
LIST
IMAGE
SOURCE
SEEK
SEEK
PUSH SOUND / ENTER
ANGLE
1
2
3
4
5
6
CDX-GT710
1
2
3
7
8
9
q;
qa qs
qdqf
qg
qh qj
qk
5
4
6
OFF
DSPL
REP
SHUF
MENU
SCRL
SOURCE
SOUND
MODE
PAUSE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
ENTER
LIST/
CAT
qs
5
wd
qj
2
w;
ql
qf
ws
wa
wh
wg
wf
qh
9
G
RESET button
(Location behind the front
panel)
4
H
Disc slot 6
To insert the disc.
I
Display window
J Z
(eject)/ANGLE button 7
To eject the disc/slide down the front panel
(press); angle the front panel in 3 positions
(press and hold).
(press); angle the front panel in 3 positions
(press and hold).
K
(front panel release) button 5
L
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/AUX/SAT*
2
).
M
LIST button 11, 14
To list up.
N
DSPL (display) button 10
To change display items.
O
Number buttons
CD/MD*
1
:
(1):
REP 10, 14
(2):
SHUF 10, 14
(3)/(4):
GP
*
4
/ALBM
*
5
–/+
To skip albums (press); skip albums
continuously (press and hold).*
continuously (press and hold).*
6
(5):
BBE MP 2
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
“BBE MP on.” To cancel, set “BBE MP
off.”
(6):
PAUSE
*
7
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
P
SCRL (scroll) button 10
To scroll the display item.
Q
OFF button
To power off; stop the source.
R
AUX input jack 13
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql
ENTER button
To complete a setting.
w; <
/
,
(SEEK –/+) buttons
CD/MD*
1
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
wa
VOL (volume) +/– button
To adjust volume.
ws
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wd
SOUND button
To enter sound setting.
wf
LIST/CAT
*
2
button 11, 14
To list up.
wg M
/
m
(+/–) buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
skip groups continuously (press and hold).
wh
Number buttons
CD/MD*
1
:
(1):
REP 10, 14
(2):
SHUF 10, 14
(6):
PAUSE
*
7
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
*1
When an MD changer is connected.
*2
When the SAT tuner is connected.
*3
When a CD/MD changer is connected.
*4
When an ATRAC CD is played.
*5
When an MP3/WMA/AAC is played.
*6
If the changer is connected, the operation is
different, see page 14.
different, see page 14.
*7
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
7
CDX-GT71W/GT710/GT760
• CDX-GT710: AEP, UK model
• CDX-GT760
8
Location of controls and basic operations
Main unit
Card remote commander
RM-X154
RM-X154
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
SEEK +/– control
CD/MD*
1
:
To skip tracks (press up/down); skip tracks
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
B
MODE button 10, 15
To select the radio band (FM/MW/LW);
select the unit*
select the unit*
2
.
C
Volume control dial
To adjust volume.
SOUND button
To enter sound setting.
ENTER button
To apply a menu setting.
D
Receptor for the card remote
commander
commander
E
MENU button
To enter menu.
F
IMAGE button
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
MODE
MENU
DSPL
AF/TA
OFF
AUX
REP
PTY
SHUF
PAUSE
BBE MP
GP/ALBM
LIST
IMAGE
SOURCE
SEEK
SEEK
PUSH SOUND / ENTER
ANGLE
1
2
3
4
5
6
CDX-GT710
1
2
3
7
8
9
q;
qa qs
qdqf
qg
qh qj
qk
5
4
6
OFF
DSPL/PTY
REP
SHUF
MENU
LIST
SCRL
SOURCE
SOUND
MODE
PAUSE
1
3
2
4
6
5
ATT
VOL
+
ñ
+
ñ
ENTER
qs
qd
wd
5
2
qj
ql
w;
qf
ws
wa
wh
wf
wg
OFF
DSPL/PTY
REP
SHUF
MENU
LIST
SCRL
SOURCE
SOUND
MODE
PAUSE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
ENTER
qs
qd
wd
5
2
qj
ql
w;
qf
ws
wa
wh
wf
wg
9
G
RESET button
(Location behind the front
panel)
4
H
Disc slot 6
To insert the disc.
I
Display window
J Z
(eject)/ANGLE button 7
To eject the disc/slide down the front panel
(press); angle the front panel in 3 positions
(press and hold).
(press); angle the front panel in 3 positions
(press and hold).
K
(front panel release) button 5
L
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/AUX).
M
LIST button 11, 15
To list up.
N
DSPL (Display)/PTY (Program Type)
button 12
button 12
To change display items/select PTY in RDS.
O
Number buttons
CD/MD*
1
:
(1):
REP 10, 15
(2):
SHUF 10, 15
(3)/(4):
GP
*
3
/ALBM
*
4
–/+
To skip albums (press); skip albums
continuously (press and hold).*
continuously (press and hold).*
5
(5):
BBE MP 2
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
“BBE MP on.” To cancel, set “BBE MP
off.”
(6):
PAUSE
*
6
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
P
AF (Alternative Frequencies)/TA
(Traffic Announcement) button 11
(Traffic Announcement) button 11
To set AF and TA in RDS.
Q
OFF button
To power off; stop the source.
R
AUX input jack 14
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql
ENTER button
To complete a setting.
w; <
/
,
(SEEK –/+) buttons
CD/MD*
1
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
wa
VOL (volume) +/– button
To adjust volume.
ws
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wd
SOUND button
To enter sound setting.
wf M
/
m
(+/–) buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
skip groups continuously (press and hold).
wg
SCRL (scroll) button 10
To scroll the display item.
wh
Number buttons
CD/MD*
1
:
(1):
REP 10, 15
(2):
SHUF 10, 15
(6):
PAUSE
*
6
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
*1
When an MD changer is connected.
*2
When a CD/MD changer is connected.
*3
When an ATRAC CD is played.
*4
When an MP3/WMA/AAC is played.
*5
If the changer is connected, the operation is
different, see page 15.
different, see page 15.
*6
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 18.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 18.
8
Location of controls and basic operations
Main unit
Card remote commander
RM-X156
RM-X156
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
SEEK +/– control
CD/MD*
1
:
To skip tracks (press up/down); skip tracks
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
continuously (press up/down, then press up/
down again within about 1 second and hold);
reverse/fast-forward a track (press up/down
and hold).
Radio:
To tune in stations automatically (press up/
down); find a station manually (press up/
down and hold).
B
MODE button 10, 13
To select the radio band (FM/AM); select the
unit*
unit*
2
.
C
Volume control dial
To adjust volume.
SOUND button
To enter sound setting.
ENTER button
To apply a menu setting.
D
Receptor for the card remote
commander
commander
E
MENU button
To enter menu.
F
IMAGE button
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Wall paper mode 1-3 t
normal play/reception mode
MODE
MENU
DSPL
SCRL
OFF
AUX
REP
SHUF
PAUSE
BBE MP
GP/ALBM
LIST
IMAGE
SOURCE
SEEK
SEEK
PUSH SOUND / ENTER
ANGLE
1
2
3
4
5
6
CDX-GT760
1
2
3
5
4
6 7
8
9
q;
qa qs
qdqf
qh
qj qk
ql
qg
OFF
DSPL
REP
SHUF
MENU
SCRL
SOURCE
SOUND
MODE
PAUSE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
ENTER
LIST
qs
5
wf
qk
2
wa
w;
qf
wd
ws
wh
qj
wg
qd
9
G
RESET button
(Location behind the front
panel)
4
H
Disc slot 6
To insert the disc.
I
Display window
J Z
(eject)/ANGLE button 7
To eject the disc/slide down the front panel
(press); angle the front panel in 3 positions
(press and hold).
(press); angle the front panel in 3 positions
(press and hold).
K
(front panel release) button 5
L
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/AUX).
M
LIST button 11, 14
To list up.
N
DSPL (display) button 10
To change display items.
O
Frequency select switch
(located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
See “Frequency select switch” in the
supplied installation/connections manual.
P
Number buttons
CD/MD*
1
:
(1):
REP 10, 14
(2):
SHUF 10, 14
(3)/(4):
GP
*
3
/ALBM
*
4
–/+
To skip albums (press); skip albums
continuously (press and hold).*
continuously (press and hold).*
5
(5):
BBE MP 2
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
“BBE MP on.” To cancel, set “BBE MP
off.”
(6):
PAUSE
*
6
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
Q
SCRL (scroll) button 10
To scroll the display item.
R
OFF button
To power off; stop the source.
S
AUX input jack 13
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
w;
ENTER button
To complete a setting.
wa <
/
,
(SEEK –/+) buttons
CD/MD*
1
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
ws
VOL (volume) +/– button
To adjust volume.
wd
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wf
SOUND button
To enter sound setting.
wg M
/
m
(+/–) buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
skip groups continuously (press and hold).
wh
Number buttons
CD/MD*
1
:
(1):
REP 10, 14
(2):
SHUF 10, 14
(6):
PAUSE
*
6
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
*1
When an MD changer is connected.
*2
When a CD/MD changer is connected.
*3
When an ATRAC CD is played.
*4
When an MP3/WMA/AAC is played.
*5
If the changer is connected, the operation is
different, see page 14.
different, see page 14.
*6
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
8
CDX-GT71W/GT710/GT760
• CONNECTIONS
• CDX-GT71W
• CDX-GT71W
A
B
AUDIO OUT
FRONT
AUDIO OUT
REAR
SUB OUT (MONO)
BUS AUDIO IN
BUS CONTROL IN
BUS AUDIO IN
BUS CONTROL IN
Source selector
*
Selector de fuente
*
XA-C40
*
not supplied
no suministrado
Ejemplo de conexiones
Notas (
2
-A)
•
Asegúrese de conectar primero el cable de conexión a masa
antes de realizar la conexión del amplifi cador.
antes de realizar la conexión del amplifi cador.
•
La alarma sonará únicamente si se utiliza el amplifi cador
incorporado.
incorporado.
Sugerencia (
2
-B- )
Si desea conectar dos o más cambiadores de CD/MD,
necesitará el selector de fuente XA-C40 (no suministrado).
necesitará el selector de fuente XA-C40 (no suministrado).
Connection example
Notes (
2
-A)
•
Be sure to connect the ground (earth) lead before connecting
the amplifi er.
the amplifi er.
•
The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C40 (not supplied) is necessary.
selector XA-C40 (not supplied) is necessary.
Click on the first or last page to see other CDX-GT710 / CDX-GT71W / CDX-GT760 service manuals if exist.