Sony CDX-GT620U / CDX-GT627UE / CDX-GT670U / CDX-GT670US Service Manual ▷ View online
CDX-GT620U/GT627UE/GT670U/GT670US
13
3-3. MAIN BOARD
3-4. SERVO BOARD
MAIN board
insulating sheet
two screws
(+PTT
2.6
× 8)
three ground point screws
(+PTT
2.6
× 6)
two screws
(+P
2.6
× 8)
screw
(+PTT
2.6
× 10)
heat sink
two screws
(+P
2.6
× 8)
two screws
(+PTT
2.6
× 10)
SERVO board
SERVO board
claw
claw
toothed lock screw
(M
1.7
× 2.5)
toothed lock screw
(M
1.7
× 2.5)
Remove the eleven solders.
GRY
YEL
BLU
ORG
RED
BLK
RED
WHT
BLK
RED
WHT
optical pick-up (16 core)
(CN111)
CDX-GT620U/GT627UE/GT670U/GT670US
14
3-5. CHASSIS (T) SUB ASSY
3-6. ROLLER ARM ASSY
chassis (T) sub assy
claw
two precision screws
(+P
1.7
× 2.2)
two precision screws
(+P
1.7
× 2.2)
washer
gear (RA1)
roller arm assy
spring (RAL)
spring (RAR)
CDX-GT620U/GT627UE/GT670U/GT670US
15
3-7. CHASSIS (OP) ASSY
3-8. CHUCKING ARM SUB ASSY
coil spring (damper) (natural)
coil spring (damper) (green)
chassis (OP) assy
tension spring (KF)
gear (LE1)
lever (D)
slider (R)
chucking arm sub assy
spring
Note: Have this portion receive the chassis.
Note: Have this portion receive the chassis.
Note: Be careful not to touch the turn table.
CDX-GT620U/GT627UE/GT670U/GT670US
16
3-9. SLED MOTOR ASSY
sled mtor assy
sled mtor assy
spring
spring
stand
stand
turn table
three serration screws
(M
2
× 3)
three
serration
screws
(M
2
× 3)
Note: Place the stand with care not to touch the turn table.
Note:
Never remove these parts since they were adjusted.
Never remove these parts since they were adjusted.
Note for Assembly
Note: Take care to prevent the chassis from being bent
when tightening the three machine screws.
Click on the first or last page to see other CDX-GT620U / CDX-GT627UE / CDX-GT670U / CDX-GT670US service manuals if exist.