Sony CDX-GT240 / CDX-GT24W / CDX-GT290 / CDX-GT290S Service Manual ▷ View online
CDX-GT24W/GT240/GT290/GT290S
13
3-7. CHASSIS (OP) ASSY
3-8. CHUCKING ARM SUB ASSY
7 two coil springs (damper) (natural)
8 coil spring (damper) (green)
6 chassis (OP) assy
5
1 tension spring (KF)
2 gear (LE1)
3 lever (D)
4 slider (R)
3 chucking arm sub assy
2
1 spring
Note: Have this portion receive the chassis.
Note: Have this portion receive the chassis.
Note: Be careful not to touch the turn table.
CDX-GT24W/GT240/GT290/GT290S
14
3-9. SLED MOTOR ASSY
3 sled motor assy
sled motor assy
1 spring
spring
stand
stand
turn table
2 three serration screws
(M
2
u 3)
three serration screws
(M 2
(M 2
u 3)
Note: Place the stand with care not to touch the turn table.
Note:
Never remove these parts since they were adjusted.
Never remove these parts since they were adjusted.
bearing (R)
bearing (F)
Note for Assembly
Note: Take care to prevent the chassis from being bent
when tightening the three machine screws.
CDX-GT24W/GT240/GT290/GT290S
15
3-10. OPTICAL PICK-UP SECTION
3-11. OPTICAL PICK-UP
1
2 optical pick-up section
Note: Be careful not to touch the lens and hologram
terminal when removing the optical pick-up section.
1 tapping screw
(P
1.4)
2 leaf spring (OPS)
3 rack
5 optical pick-up
4 lead screw assy
CDX-GT24W/GT240/GT290/GT290S
16
MEMO
Click on the first or last page to see other CDX-GT240 / CDX-GT24W / CDX-GT290 / CDX-GT290S service manuals if exist.