Sony CDX-F7000 / CDX-F7005X / CDX-FW700 Service Manual ▷ View online
5
CDX-F7000/F7005X/FW700
4
Location of controls
Refer to the pages listed for details.
a
DSPL (display mode change) button
12, 14, 21
12, 14, 21
b
Number buttons
Radio:
To store stations/receive stored stations.
CD/MD:
(1):
To store stations/receive stored stations.
CD/MD:
(1):
REP
13
(2):
SHUF
13
c
DSO button
23
d
MENU button
To display the menus.
e
SOURCE (Power on/Radio/CD/MD
*
1
/
AUX
*
2
) button
To select the source.
f
SEEK/AMS (
<
/
,
) buttons
To skip tracks/fast-forward, reverse a track/
tune in stations automatically, find a station
manually/select a setting.
tune in stations automatically, find a station
manually/select a setting.
g
SOUND button
20
h
OFF (Stop/Power off) button
11, 24
i
VOL (+/–) buttons
To turn up or down the volume.
j
EQ7 button
22
Card remote commander RM-X118A
DISC
–
ATT
OFF
REP
PTY
SHUF
DSPL
1
4
MODE
2
5
3
6
SOURCE
DISC
+
SEEK+
SEEK–
SOUND
ENTER
MENU
LIST
CAT
EQ7
DSO
VOL
DISC –
SOURCE
DISC +
SEEK+
SEEK–
In menu mode, the currently selectable button(s) of
these four are indicated with a “
these four are indicated with a “
v
” in the display.
(SEEK)
(
<
):
to select
leftwards
leftwards
(DISC)
(
M
):
to select upwards
(DISC)
(
m
):
to select downwards
(SEEK)
(
,
):
to select
rightwards
rightwards
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
5
k
MODE button
To change operation.
l
LIST (CAT)
*
3
button
15, 18
m
DISC (ALBUM) (
M
/
m
) buttons
To receive preset stations/change the disc*
4
,
skip albums*
5
/select a menu.
n
ENTER button
To enter a setting.
o
ATT button
20
*1
When an optional MD unit is connected.
*2
Available only when an optional Sony portable
device is connected to AUX IN terminal of the unit.
When you connect a Sony portable device and CD/
MD unit(s) at the same time, use the AUX IN
selector.
device is connected to AUX IN terminal of the unit.
When you connect a Sony portable device and CD/
MD unit(s) at the same time, use the AUX IN
selector.
*3
The CAT button is available only when the XM
tuner is connected.
tuner is connected.
*4
When an optional CD/MD unit is connected.
*5
Available only when an optional CD unit with the
MP3 file control function is connected, and MP3 file
is played.
MP3 file control function is connected, and MP3 file
is played.
Note
If the display disappears by pressing
If the display disappears by pressing
(OFF)
, it cannot
be operated with the card remote commander unless
(SOURCE)
on the unit is pressed, or a disc is inserted
to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery” on page 25.
For details on how to replace the battery, see
“Replacing the lithium battery” on page 25.
Selecting a disc and album
Disc and album can be skipped using the DISC
(ALBUM) (M/m) buttons.
(ALBUM) (M/m) buttons.
(With optional unit)
*6
Available only when an optional CD unit with the
MP3 file control function is connected, and MP3 file
is played.
MP3 file control function is connected, and MP3 file
is played.
Skipping tracks continuously
Press once either SEEK/AMS (< or ,)
button, then press again within about 1 second
and hold.
button, then press again within about 1 second
and hold.
To
Press
Skip discs
– Disc selection
– Disc selection
M or m [once for each disc]
Skip albums*
6
– Album selection
M or m [hold for a moment]
and release.
To continuously skip
albums, press (and hold)
within about 1 second of
first releasing the button.
and release.
To continuously skip
albums, press (and hold)
within about 1 second of
first releasing the button.
6
The buttons on the unit share the same
functions as those on the card remote
commander.
functions as those on the card remote
commander.
a
5
SEEK/AMS (
.m
/
M>
)
buttons
b
Volume control dial/SOUND button
Rotate to:
– Adjust the volume.
– Adjust the sound settings.
Press to:
– Select the sound items.
– Adjust the volume.
– Adjust the sound settings.
Press to:
– Select the sound items.
3
qs
DISC (ALBUM)/PRESET (+/–)
buttons
buttons
4
MODE button
6
DSO button
7
SCRL (scroll) button
8
Display window
9 Z
(eject) button
(located on the front side
of the unit, behind the front panel)
10, 11
0
OPEN button 9, 10, 11
qa
Receptor for the card remote
commander
commander
qd
OFF (Stop/Power off) button
*
qf
EQ7 button
qg
RESET button
(located on the front side of
the unit, behind the front panel)
8
qh
SOURCE button
qj
Number buttons
qk
DSPL (display mode change) button
ql
IMAGE button 23
*
Warning when installing in a car without
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
and hold
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
and hold
(OFF)
on the unit until the display
disappears.
Otherwise, the display does not turn off and this
causes battery drain.
causes battery drain.
PUS
H SOUND
DISC/
PRESET
MODE
DISC/
PRESET
SEEK
+
SEEK
–
IMAGE
OFF
DSO
EQ7
SCRL
REP
SHUF
6
OPEN
D
E
SOURCE
DSPL
1
S
2
5
3
4
CDX-F7005X/F7000
6
The buttons on the unit share the same
functions as those on the card remote
commander.
functions as those on the card remote
commander.
a
5
SEEK/AMS (
.m
/
M>
)
buttons
b
Volume control dial/SOUND button
Rotate to:
– Adjust the volume.
– Adjust the sound settings.
Press to:
– Select the sound items.
– Adjust the volume.
– Adjust the sound settings.
Press to:
– Select the sound items.
3
qs
DISC (ALBUM)/PRESET (+/–)
buttons
buttons
4
MODE button
6
DSO button
7
SCRL (scroll) button
8
Display window
9 Z
(eject) button
(located on the front side
of the unit, behind the front panel)
10, 11
0
OPEN button 9, 10, 11
qa
Receptor for the card remote
commander
commander
qd
OFF (Stop/Power off) button
*
qf
EQ7 button
qg
RESET button
(located on the front side of
the unit, behind the front panel)
8
qh
SOURCE button
qj
Number buttons
qk
DSPL (display mode change) button
ql
IMAGE button 23
*
Warning when installing in a car without
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
and hold
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
and hold
(OFF)
on the unit until the display
disappears.
Otherwise, the display does not turn off and this
causes battery drain.
causes battery drain.
PUS
H SOUND
DISC/
PRESET
MODE
DISC/
PRESET
SEEK
+
SEEK
–
IMAGE
OFF
DSO
EQ7
SCRL
REP
SHUF
6
OPEN
D
E
SOURCE
DSPL
1
S
2
5
3
4
CDX-FW700
6
CDX-F7000/F7005X/FW700
L
R
AUDIO OUT
FRONT
BUS AUDIO IN
/AUX IN
*
2
BUS
CONTROL IN
REMOTE
IN
AUDIO OUT
REAR
SUB OUT (MONO)
Schéma de raccordement (
3
)
1
À un point métallique de la voiture
Branchez d‘abord le fil de masse noir et, ensuite,
les fils d‘entrée d‘alimentation jaune et rouge.
les fils d‘entrée d‘alimentation jaune et rouge.
2
Vers le fil de commande de l‘antenne électrique ou
le fil d‘alimentation de l‘amplificateur d‘antenne
le fil d‘alimentation de l‘amplificateur d‘antenne
Remarques
• Il n'est pas nécessaire de raccorder ce fil s'il n'y a
• Il n'est pas nécessaire de raccorder ce fil s'il n'y a
pas d'antenne électrique ni d'amplificateur
d'antenne, ou avec une antenne télescopique
manuelle.
d'antenne, ou avec une antenne télescopique
manuelle.
• Si votre voiture est équipée d'une antenne FM/
AM intégrée dans la vitre arrière/latérale, voir
« Remarques sur les fils de commande et
d'alimentation ».
« Remarques sur les fils de commande et
d'alimentation ».
3
Au niveau du AMP REMOTE IN de l’amplificateur
de puissance en option
de puissance en option
Ce raccordement s’applique uniquement aux
amplificateurs. Le
amplificateurs. Le
branchement de tout autre
système risque d’endommager l’appareil.
4
Vers le cordon de liaison d’un téléphone de
voiture
voiture
5
Vers le connecteur du signal d’éclairage de la
voiture
voiture
Raccordez d’abord le fil de masse noir à un point
métallique du véhicule.
métallique du véhicule.
6
À la borne +12 V qui est alimentée quand la clé de
contact est sur la position accessoires
contact est sur la position accessoires
Remarques
• S'il n'y a pas de position accessoires, raccordez la
• S'il n'y a pas de position accessoires, raccordez la
borne d'alimentation (batterie) +12 V qui est
alimentée en permanence.
Raccordez d’abord le fil de masse noir à un point
métallique du véhicule.
alimentée en permanence.
Raccordez d’abord le fil de masse noir à un point
métallique du véhicule.
• Si votre voiture est équipée d'une antenne FM/
AM intégrée dans la vitre arrière/latérale, voir
« Remarques sur les fils de commande et
d'alimentation ».
« Remarques sur les fils de commande et
d'alimentation ».
7
À la borne +12 V qui est alimentée en
permanence
permanence
Raccordez d’abord le fil de masse noir à un point
métallique du véhicule.
métallique du véhicule.
Remarques sur les fils de commande et
d’alimentation
• Le fil de commande de l’antenne électrique (bleu)
d’alimentation
• Le fil de commande de l’antenne électrique (bleu)
fournit une alimentation de +
12
V
CC
lorsque vous
mettez la radio sous tension.
• Lorsque votre voiture est équipée d’une antenne
FM/AM intégrée dans la vitre arrière/latérale,
raccordez le fil de commande de l’antenne (bleu)
ou l’entrée d’alimentation des accessoires (rouge)
à la borne d’alimentation de l’amplificateur
d’antenne existant. Pour plus de détails, consultez
votre détaillant.
raccordez le fil de commande de l’antenne (bleu)
ou l’entrée d’alimentation des accessoires (rouge)
à la borne d’alimentation de l’amplificateur
d’antenne existant. Pour plus de détails, consultez
votre détaillant.
• Une antenne électrique sans boîtier de relais ne
peut pas être utilisée avec cet appareil.
Raccordement pour la conservation de la mémoire
Lorsque le fil d’entrée d’alimentation jaune est
raccordé, le circuit de la mémoire est alimenté en
permanence même si la clé de contact est sur la
position d’arrêt.
Lorsque le fil d’entrée d’alimentation jaune est
raccordé, le circuit de la mémoire est alimenté en
permanence même si la clé de contact est sur la
position d’arrêt.
Remarques sur le raccordement des haut-parleurs
• Avant de raccorder les haut-parleurs, mettez
• Avant de raccorder les haut-parleurs, mettez
l’appareil hors tension.
• Utilisez des haut-parleurs ayant une impédance de
4 à 8 ohms avec une capacité électrique adéquate
pour éviter de les endommager.
pour éviter de les endommager.
• Ne raccordez pas les bornes du système de haut-
parleurs au châssis de la voiture et ne raccordez
pas les bornes des haut-parleurs droit à celles du
haut-parleur gauche.
pas les bornes des haut-parleurs droit à celles du
haut-parleur gauche.
• Ne raccordez pas le câble de masse de cet appareil
à la borne négative (–) de l’enceinte.
• N’essayez pas de raccorder les haut-parleurs en
parallèle.
• Raccordez uniquement des haut-parleurs passifs.
Le raccordement de haut-parleurs actifs (avec
amplificateurs intégrés) aux bornes des
amplificateurs intégrés) aux bornes des
haut-
parleurs peut endommager l’appareil.
• Pour éviter tout dysfonctionnement, n’utilisez pas
les fils des haut-parleurs intégrés installés dans
votre voiture si l’appareil partage un fil négatif
commun (–) pour les haut-parleurs droit et gauche.
votre voiture si l’appareil partage un fil négatif
commun (–) pour les haut-parleurs droit et gauche.
• Ne raccordez pas entre eux les cordons des haut-
parleurs de l’appareil.
Remarque sur le raccordement
Si les haut-parleurs et l’amplificateur ne sont pas
raccordés correctement, le message « FAILURE »
s’affiche. Dans ce cas, assurez-vous que les haut-
parleurs et l’amplificateur sont bien raccordés.
Si les haut-parleurs et l’amplificateur ne sont pas
raccordés correctement, le message « FAILURE »
s’affiche. Dans ce cas, assurez-vous que les haut-
parleurs et l’amplificateur sont bien raccordés.
Notes on the control and power supply leads
• The power antenna control lead (blue) supplies
• The power antenna control lead (blue) supplies
+12 V DC when you turn on the tuner.
• When your car has built-in FM/AM antenna in the
rear/side glass, connect the power antenna control
lead (blue) or the accessory power input lead (red)
to the power terminal of the existing antenna
booster. For details, consult your dealer.
lead (blue) or the accessory power input lead (red)
to the power terminal of the existing antenna
booster. For details, consult your dealer.
• A power antenna without a relay box cannot be
used with this unit.
Memory hold connection
When the yellow power input lead is connected,
power will always be supplied to the memory circuit
even when the ignition switch is turned off.
When the yellow power input lead is connected,
power will always be supplied to the memory circuit
even when the ignition switch is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms,
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms,
and with adequate power handling capacities to
avoid its damage.
avoid its damage.
• Do not connect the speaker terminals to the car
chassis, or connect the terminals of the right
speakers with those of the left speaker.
speakers with those of the left speaker.
• Do not connect the ground lead of this unit to the
negative (–) terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active
• Connect only passive speakers. Connecting active
speakers (with built-in amplifiers) to the speaker
terminals may damage the unit.
terminals may damage the unit.
• To avoid a malfunction, do not use the built-in
speaker leads installed in your car if the unit shares
a common negative (–) lead for the right and left
speakers.
a common negative (–) lead for the right and left
speakers.
• Do not connect the unit’s speaker leads to each
other.
Note on connection
If speaker and amplifier are not connected correctly,
“FAILURE” appears in the display. In this case, make
sure the speaker and amplifier are connected
correctly.
If speaker and amplifier are not connected correctly,
“FAILURE” appears in the display. In this case, make
sure the speaker and amplifier are connected
correctly.
3
Source selector
(not supplied)
Sélecteur de source
(non fourni)
XA-C30
AMP REM
Max. supply current 0.3 A
Courant max. fourni 0,3 A
Courant max. fourni 0,3 A
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
Blue/white striped
Rayé bleu/blanc
Rayé bleu/blanc
White
Blanc
Blanc
Green
Vert
Vert
Purple
Mauve
Mauve
White/black striped
Rayé blanc/noir
Rayé blanc/noir
Gray/black striped
Rayé gris/noir
Rayé gris/noir
Green/black striped
Rayé vert/noir
Rayé vert/noir
Purple/black striped
Rayé mauve/noir
Rayé mauve/noir
Gray
Gris
Gris
Supplied with the CD/MD changer
Fourni avec le changeur de CD/MD
Fourni avec le changeur de CD/MD
3
*
6
from car antenna
à partir de l’antenne de la voiture
à partir de l’antenne de la voiture
Left
Gauche
Gauche
Right
Droit
Droit
Left
Gauche
Gauche
Right
Droit
Droit
2
5
6
4
ANT REM
4
Red
Rouge
Rouge
Yellow
Jaune
Jaune
Black
Noir
Noir
Blue
Bleu
Bleu
Light blue
Bleu ciel
Bleu ciel
Max. supply current 0.1 A
Courant max. fourni 0,1 A
ATT
1
*
1
*
1
RCA pin cord (not supplied)
*
2
Be sure to match the color-coded
cord for audio to the appropriate
jacks from the unit. If you connect an
optional CD/MD unit, you cannot use
AUX IN terminal.
cord for audio to the appropriate
jacks from the unit. If you connect an
optional CD/MD unit, you cannot use
AUX IN terminal.
*
3
Auxiliary optional equipment such
as portable DVD player (not
supplied)
as portable DVD player (not
supplied)
*
4
Supplied with the auxiliary
equipment
equipment
*
5
Supplied with XA-C30
*
6
Insert with the cord upwards.
*
1
Cordon à broche RCA (non fourni)
*
2
Veillez à faire correspondre le code
couleur audio aux fiches de
l’appareil. Si vous raccordez un
appareil CD ou MD en option, vous
ne pouvez pas utiliser la borne AUX
IN.
couleur audio aux fiches de
l’appareil. Si vous raccordez un
appareil CD ou MD en option, vous
ne pouvez pas utiliser la borne AUX
IN.
*
3
Appareil auxiliaire en option, par
exemple un lecteur de DVD
portable (non fourni)
exemple un lecteur de DVD
portable (non fourni)
*
4
Fourni avec l’appareil auxiliaire
*
5
Fourni avec le XA-C30
*
6
Insérez avec le câble vers le bas.
*
4
*
3
*
5
*
1
7
Orange/white striped
Rayé orange/blanc
Rayé orange/blanc
ILLUMINATION
Connection diagram (
3
)
1
To a metal surface of the car
First connect the black ground lead, then
connect the yellow and red power input leads.
connect the yellow and red power input leads.
2
To the power antenna control lead or power
supply lead of antenna booster amplifier
supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if there
• It is not necessary to connect this lead if there
is no power antenna or antenna booster, or
with a manually-operated telescopic antenna.
with a manually-operated telescopic antenna.
• When your car has a built-in FM/AM antenna in
the rear/side glass, see “Notes on the control
and power supply leads.”
and power supply leads.”
3
To AMP REMOTE IN of an optional power
amplifier
amplifier
This connection is only for amplifiers. Connecting
any other system may damage the unit.
any other system may damage the unit.
4
To the interface cable of a car telephone
5
To a car’s illumination signal
Be sure to connect the black ground lead to a
metal surface of the car first.
metal surface of the car first.
6
To the +12 V power terminal which is energized
in the accessory position of the ignition key
switch
in the accessory position of the ignition key
switch
Notes
• If there is no accessory position, connect to the
• If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energized at all times.
Be sure to connect the black ground lead to a
metal surface of the car first.
energized at all times.
Be sure to connect the black ground lead to a
metal surface of the car first.
• When your car has a built-in FM/AM antenna in
the rear/side glass, see “Notes on the control
and power supply leads.”
and power supply leads.”
7
To the +12 V power terminal which is energized
at all times
at all times
Be sure to connect the black ground lead to a
metal surface of the car first.
metal surface of the car first.
Connections (CDX-F7000/F7005X)
7
CDX-F7000/F7005X/FW700
L
R
AUDIO OUT
FRONT
BUS AUDIO IN
/AUX IN
*
2
SUB OUT (MONO)
BUS
CONTROL IN
REMOTE
IN
AUDIO OUT
REAR
Diagrama de conexión (
3
)
1
A una superficie metálica del automóvil
Conecte primero el cable de toma a tierra negro, y
después los cables con raya naranja/blanca,
amarillo, y rojo de entrada de alimentación.
después los cables con raya naranja/blanca,
amarillo, y rojo de entrada de alimentación.
2
Al cable de control de la antena motorizada o al
cable de fuente de alimentación del amplificador
de antena
cable de fuente de alimentación del amplificador
de antena
Notas
• Si no se dispone de antena motorizada ni de
• Si no se dispone de antena motorizada ni de
amplificador de antena, o se
utiliza una antena
telescópica accionada manualmente, no será
necesario conectar este cable.
necesario conectar este cable.
• Si el automóvil incorpora una antena de FM/AM
en el cristal trasero o lateral, consulte “Notas
sobre los cables de control y de fuente de
alimentación”.
sobre los cables de control y de fuente de
alimentación”.
3
Para conectar a AMP REMOTE IN del amplificador
de potencia opcional
de potencia opcional
Esta conexión es sólo para amplificadores. La
conexión de cualquier otro sistema puede dañar la
unidad.
conexión de cualquier otro sistema puede dañar la
unidad.
4
Al cable de interfaz de un teléfono para automóvil
5
A una señal de iluminación del automóvil
Asegúrese de conectar primero el cable de toma a
tierra negro a una superficie metálica del
automóvil.
tierra negro a una superficie metálica del
automóvil.
6
Al terminal de alimentación de +12 V que recibe
energía en la posición de accesorio del interruptor
de la llave de encendido
energía en la posición de accesorio del interruptor
de la llave de encendido
Notas
• Si no hay posición de accesorio, conéctelo al
• Si no hay posición de accesorio, conéctelo al
terminal de alimentación (batería) de +12 V que
recibe energía sin interrupción.
Asegúrese de conectar primero el cable de toma
a tierra negro a una superficie metálica del
automóvil.
recibe energía sin interrupción.
Asegúrese de conectar primero el cable de toma
a tierra negro a una superficie metálica del
automóvil.
• Si el automóvil incorpora una antena de FM/AM
en el cristal trasero/lateral, consulte “Notas sobre
los cables de control y de fuente de
alimentación”.
los cables de control y de fuente de
alimentación”.
7
Al terminal de alimentación de +12 V que recibe
energía sin interrupción
energía sin interrupción
Asegúrese de conectar primero el cable de toma a
tierra negro a una superficie metálica del automóvil.
tierra negro a una superficie metálica del automóvil.
Notas sobre los cables de control y de fuente de
alimentación
• El cable de control de la antena motorizada (azul)
alimentación
• El cable de control de la antena motorizada (azul)
suministrará cc de + 12V cuando conecte la
alimentación del sintonizador.
alimentación del sintonizador.
• Si el automóvil dispone de una antena de FM/AM
incorporada en el cristal trasero o lateral, conecte
el cable de control de antena motorizada (azul) o
el cable de entrada de alimentación auxiliar (rojo)
al terminal de alimentación del amplificador de
antena existente. Para obtener más información,
consulte a su proveedor.
el cable de control de antena motorizada (azul) o
el cable de entrada de alimentación auxiliar (rojo)
al terminal de alimentación del amplificador de
antena existente. Para obtener más información,
consulte a su proveedor.
• Con esta unidad no es posible utilizar una antena
motorizada sin caja de relé.
Conexión para protección de la memoria
Si conecta el conductor de entrada amarillo, el
circuito de la memoria recibirá siempre
alimentación, aunque apague la llave de encendido.
Si conecta el conductor de entrada amarillo, el
circuito de la memoria recibirá siempre
alimentación, aunque apague la llave de encendido.
Notas sobre la conexión de los altavoces
• Antes de conectar los altavoces, desconecte la
• Antes de conectar los altavoces, desconecte la
alimentación de la unidad.
• Utilice altavoces con una impedancia de 4 a 8
Ω
con la capacidad de potencia adecuada para evitar
que se dañen.
que se dañen.
• No conecte los terminales de altavoz al chasis del
automóvil, ni conecte los terminales del altavoz
derecho con los del izquierdo.
derecho con los del izquierdo.
• No conecte el cable de toma a tierra de esta
unidad al terminal negativo (–) del altavoz.
• No intente conectar los altavoces en paralelo.
• Conecte solamente altavoces pasivos. Si conecta
• Conecte solamente altavoces pasivos. Si conecta
altavoces activos (con amplificadores incorporados)
a los terminales de altavoz, puede dañar la unidad.
a los terminales de altavoz, puede dañar la unidad.
• Para evitar fallos de funcionamiento, no utilice los
cables de altavoz incorporados instalados en el
automóvil si
automóvil si
su
unidad comparte un cable negativo
común (–) para los altavoces derecho e izquierdo.
• No conecte los cables de altavoz de la unidad entre
sí.
Nota sobre la conexión
Si el altavoz y el amplificador no están conectados
correctamente, aparecerá “Failure” en la pantalla. Si
es así, compruebe la conexión de ambos dispositivos.
Si el altavoz y el amplificador no están conectados
correctamente, aparecerá “Failure” en la pantalla. Si
es así, compruebe la conexión de ambos dispositivos.
Notes on the control and power supply leads
• The power antenna control lead (blue) supplies
• The power antenna control lead (blue) supplies
+12 V DC when you turn on the tuner.
• When your car has built-in FM/AM antenna in the
rear/side glass, connect the power antenna control
lead (blue) or the accessory power input lead (red)
to the power terminal of the existing antenna
booster. For details, consult your dealer.
lead (blue) or the accessory power input lead (red)
to the power terminal of the existing antenna
booster. For details, consult your dealer.
• A power antenna without a relay box cannot be
used with this unit.
Memory hold connection
When the yellow power input lead is connected,
power will always be supplied to the memory circuit
even when the ignition switch is turned off.
When the yellow power input lead is connected,
power will always be supplied to the memory circuit
even when the ignition switch is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms,
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms,
and with adequate power handling capacities to
avoid its damage.
avoid its damage.
• Do not connect the speaker terminals to the car
chassis, or connect the terminals of the right
speakers with those of the left speaker.
speakers with those of the left speaker.
• Do not connect the ground lead of this unit to the
negative (–) terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active
• Connect only passive speakers. Connecting active
speakers (with built-in amplifiers) to the speaker
terminals may damage the unit.
terminals may damage the unit.
• To avoid a malfunction, do not use the built-in
speaker leads installed in your car if the unit shares
a common negative (–) lead for the right and left
speakers.
a common negative (–) lead for the right and left
speakers.
• Do not connect the unit’s speaker leads to each
other.
Note on connection
If speaker and amplifier are not connected correctly,
“Failure” appears
If speaker and amplifier are not connected correctly,
“Failure” appears
in
the
display. In
this
case,
make
sure the speaker and amplifier are connected
correctly.
correctly.
3
Source selector
(not supplied)
Selector de fuente
(no suministrado)
XA-C30
AMP REM
Max. supply current 0.3 A
Corriente máx. de alimentación de 0,3 A
Corriente máx. de alimentación de 0,3 A
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
Blue/white striped
Con rayas azules y blancas
Con rayas azules y blancas
White
Blanco
Blanco
Green
Verde
Verde
Purple
Morado
Morado
White/black striped
Con rayas blancas y negras
Con rayas blancas y negras
Gray/black striped
Con rayas grises y negras
Con rayas grises y negras
Green/black striped
Con rayas verdes y negras
Con rayas verdes y negras
Purple/black striped
Gray
Gris
Gris
Supplied with the CD/MD changer
Suministrado con el cambiador de CD/MD
Suministrado con el cambiador de CD/MD
3
*
6
from car antenna
desde la antena del automóvil
desde la antena del automóvil
Left
Izquierdo
Izquierdo
Right
Derecho
Derecho
Left
Izquierdo
Izquierdo
Right
Derecho
Derecho
2
5
6
4
ANT REM
4
Red
Rojo
Rojo
Yellow
Amarillo
Amarillo
Black
Negro
Negro
Blue
Azul
Azul
Light blue
Azul celeste
Azul celeste
Max. supply current 0.1 A
Corriente máx. de alimentación de 0,1 A
ATT
1
*
1
*
1
RCA pin cord (not supplied)
*
2
Be sure to match the color-coded
cord for audio to the appropriate
jacks from the unit. If you connect an
optional CD/MD unit, you cannot use
AUX IN terminal.
cord for audio to the appropriate
jacks from the unit. If you connect an
optional CD/MD unit, you cannot use
AUX IN terminal.
*
3
Auxiliary optional equipment such
as portable DVD player
(not supplied)
as portable DVD player
(not supplied)
*
4
Supplied with the auxiliary
equipment
equipment
*
5
Supplied with XA-C30
*
6
Insert with the cord upwards.
*
1
Cable con terminales RCA
(no suministrado)
(no suministrado)
*
2
Asegúrese de hacer coincidir el
código codificado con colores para
audio con las tomas apropiadas de
la unidad. Si conecta una unidad de
CD/MD opcional, no podrá utilizar
el terminal AUX IN.
código codificado con colores para
audio con las tomas apropiadas de
la unidad. Si conecta una unidad de
CD/MD opcional, no podrá utilizar
el terminal AUX IN.
*
3
Equipo opcional auxiliar como un
reproductor de DVD portátil
(no suministrado)
reproductor de DVD portátil
(no suministrado)
*
4
Suministrado con el equipo auxiliar
*
5
Suministrado con el XA-C30
*
6
Insertar con el cable hacia arriba.
*
4
*
3
*
5
*
1
7
Orange/white striped
Con rayas naranjas y blancas
Con rayas naranjas y blancas
ILLUMINATION
Con rayas violetas y negras
Connection diagram (
3
)
1
To a metal surface of the car
First connect the black ground lead, then
connect the yellow and red power input leads.
connect the yellow and red power input leads.
2
To the power antenna control lead or power
supply lead of antenna booster amplifier
supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if there
• It is not necessary to connect this lead if there
is no power antenna or antenna booster, or
with a manually-operated telescopic antenna.
with a manually-operated telescopic antenna.
• When your car has a built-in FM/AM antenna in
the rear/side glass, see “Notes on the control
and power supply leads.”
and power supply leads.”
3
To AMP REMOTE IN of an optional power
amplifier
amplifier
This connection is only for amplifiers. Connecting
any other system may damage the unit.
any other system may damage the unit.
4
To the interface cable of a car telephone
5
To a car’s illumination signal
Be sure to connect the black ground lead to a
metal surface of the car first.
metal surface of the car first.
6
To the +12 V power terminal which is energized
in the accessory position of the ignition key
switch
in the accessory position of the ignition key
switch
Notes
• If there is no accessory position, connect to the
• If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energized at all times.
Be sure to connect the black ground lead to a
metal surface of the car first.
energized at all times.
Be sure to connect the black ground lead to a
metal surface of the car first.
• When your car has a built-in FM/AM antenna in
the rear/side glass, see “Notes on the control
and power supply leads.”
and power supply leads.”
7
To the +12 V power terminal which is energized
at all times
at all times
Be sure to connect the black ground lead to a
metal surface of the car first.
metal surface of the car first.
Connections (CDX-FW700)
8
CDX-F7000/F7005X/FW700
SECTION 2
DISASSEMBLY
Note : This set can be disassemble according to the following sequence.
2-1.
SUB PANEL ASSY (CD)
(Page 9)
(Page 9)
2-2.
CD MECHANISM BLOCK
(Page 9)
(Page 9)
SET
2-3.
MAIN BOARD
(Page 10)
(Page 10)
2-4.
CHASSIS (T) SUB ASSY
(Page 10)
(Page 10)
2-5.
ROLLER ARM ASSY
(Page 11)
(Page 11)
2-6.
CHASSIS (OP) ASSY
(Page 11)
(Page 11)
2-8.
SL MOTOR ASSY (M902)
(Page 12)
(Page 12)
2-10. SERVO BOARD
(Page 13)
2-7.
OPTICAL PICK-UP
(Page 12)
(Page 12)
2-9.
LE MOTOR ASSY (M903)
(Page 13)
(Page 13)
Click on the first or last page to see other CDX-F7000 / CDX-F7005X / CDX-FW700 service manuals if exist.