DOWNLOAD Sony ZS-S2IP Service Manual ↓ Size: 2.74 MB | Pages: 54 in PDF or view online for FREE

On repairing CD section, playing a disc without the lid (CD), use 
Chuck Plate Jig.
•  Code number of Chuck Plate Jig: X-4918-255-1

LASER  DIODE  AND  FOCUS  SEARCH  OPERATION
CHECK
1.  Turn ON the [POWER] (US, Canadian model) or [OPERATE] 

(AEP, UK, Australian model) button and press [CD] button to 
CD position.

2.  Open the CD lid.
3.  Turn on S801 with screwdriver, etc. as following fi gure.
4.  Press the [

N

 

X

] (CD) button.

5. Confi rm the laser diode emission while observing the object-

ing lens. When there is no emission, Auto Power Control cir-
cuit or Optical Pick-up is broken.

  Objective lens moves up and down three times for focus 

search.

This section is extracted 
from instruction manual.

V

VOLUME + qa have a tactile dot.

OLUME + qa and 

u 8 have a tactile dot.

Playing the iPod

Press iPod qs (direct power-on).
“DC OUT” appears in the display (AC only).

Press 

u

8.

The iPod begins to play.

You can operate the connected iPod by the unit or the 
iPod buttons.

Pause playback

u

 8

To resume play, press it again.

Stop playback

x

 8

Go to the next 
track

>

 6

Go back to the 
previous track

.

 6

Locate a point 
while listening to 
the sound

>

 (forward) or 

.

 (backward) 

6 

while playing and hold it until 

you find the point.

Locate a point 
while observing 
on the iPod 
display

>

 (forward) or 

.

 (backward) 

6 

in pause and hold it until you 

Select a menu

Press MENU and 

find the point.

M 

or 

m 

qk on the 

remote to select a menu, and then 
press ENTER qk.

Go back to the 
previous menu

Press MENU qk on the remote.

‡ You may use the universal adaptor supplied with your iPod for a 

more customized fit. The iPod may be docked without the use of an 
adaptor.

‡ If you connect the iPod when another function is in use, the 

function will change to iPod automatically.

‡ Apple’s iPod Universal Dock Adapter (not supplied) can be used 

with this unit.

‡ To use an iPod, refer to the user’s guide of your iPod.
‡ Before disconnecting the iPod, pause playback.

You can use the unit as a battery charger. The charging 
status appears in the iPod display. For details, see the 
user’s guide of your iPod.

‡ iPod is a trademark of Apple Inc., registered in the U.S. 

and other countries.

‡ All other trademarks and registered trademarks are 

of their respective holders. In this manual, ™ and ® 
marks are not specified.

Opening/closing the Sliding Tray

Press the PUSH OPEN/CLOSE button qf.

The Sliding Tray qg is ejected half way.

Pull the Sliding Tray qg all the way out.

Attach the iPod Universal Dock Adapter if 

necessary (not supplied).

Place your iPod on the Sliding Tray qg.

Push in and adjust the Sliding Tray qg so that the 

iPod fits on the Back Support qh.

Back 
Support 

Remove the iPod

Push the Sliding Tray qg until it clicks.

Press the PUSH OPEN/CLOSE button qf.

Push the Sliding Tray qg into the unit.

‡ Do not carry the unit with an iPod set on the connector. Doing so 

may cause a malfunction.

‡ Be sure to store the Sliding Tray qg before moving the unit.

Selecting the play mode

Press MODE 4 until “     1”, “    ”, “SHUF”, “SHUF”
and “    ”, “PGM”, or “PGM” and “    ” appear in
the display. Then proceed as follows:

Repeat a 
single track

“     1”

Press 

.

 or 

>

6 to 

select the track that you want 
to repeat, then press 

u

8.

Repeat all 
tracks

“    ”

Press 

u

8.

Shuffle play “SHUF”

Press 

u

8.

Repeat tracks 
in random 
order

“SHUF” 
and “    ”

Press 

u

8.

Program 
play

“PGM”

Press 

.

 or 

>

6 then 

press DISPLA<‡E1TER 5
or E1TER qk on the remote 
for the tracks (up to 20) you 
want to program in the order 
you want. Then press 

u

8.

Programed 

track

Playing 
order

Repeat 
programed 
tracks

“PGM” 
and “    ”

Press 

.

 or 

>

6 then 

press DISPLA<‡E1TER 5
or E1TER qk on the remote 
for the tracks (up to 20) you 
want to program in the order 
you want. Then Press 

u

8.

Press MODE 4 repeatedly until the selected mode 
disappears from the display.

To check the order of tracks before play, press 
DISPLA<‡E1TER 5 or E1TER qk on the remote.
Every time you press the button, the track number 
appears in the programed order.

Press 

x

8 once if the CD is stopped and twice if the 

CD is playing. The current program will be erased. 
Then create a new program following the programing 
procedure.

You can play the same program again, since the program is saved 
until you open the CD compartment.

Listening to the radio

3UHVV5$',2‡%$1'‡$UTO PRESET qs

repeatedly (direct power-on) or press RADIO qs

DQGSUHVV%$1'qj repeatedly on the remote.
Each time you press the button, the indication 
changes as follows:
“FM” 

y “AM”

Hold down 781(RU±9 until the frequency 

digits begin to change in the display.
The player automatically scans the radio frequencies 
and stops when it finds a clear station.
If you can’t tune in a station, press the button 
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST” 
appears.

‡ If the FM broadcast is noisy, press MODE 4 until “Mono” appears 

in the display and the radio will play in monaural.

‡ If you touch or operate an iPod connected to this unit while 

listening to AM/FM, noise may occur. Avoid touching or operating 
the iPod in this case.

‡ If you hear noise from the AM/FM while supplying power to 

iPod (“DC OUT” indicator appears in the display), press and hold 
MODE for a few seconds to stop the power supply to the iPod (“DC 
OUT” indicator disappears from the display).

Presetting radio stations

You can store radio stations into the player’s memory. 
You can preset up to 30 radio stations, 20 for FM and 10 
for AM in any order.

3UHVV5$',2‡%$1'‡$UTO PRESET qs or 

%$1'qj on the remote to select the band.

Hold doZQ5$',2‡%$1'‡$UTO PRESET qs

or RADIO qs on the remote for 2 seconds until 

“AUTO” flashes in the display.

Press DISPLA<‡(17(55 RU(17(5qk on the 

remote.
The stations are stored in memory from the lower 
frequencies to the higher ones.

You need to preset a station with a weak signal 
manually.

3UHVV5$',2‡%$1'‡$UTO PRESET qs or 

%$1'qj on the remote to select the band.

Tune in a station you want.

Hold down DISPLA<‡(17(55RU(17(5qk

on the remote for 2 seconds until the preset 

number flashes in the display.

3UHVV35(6(7RU±6 until the preset number 

you want for the station flashes in the display.

Press DISPLA<‡(17(55RU(17(5qk on the 

remote.
The new station replaces the old one.

The preset radio stations remain in memory even if you unplug the 
AC power cord or remove the batteries.

Playing preset radio stations

3UHVV5$',2‡%$1'‡$UTO PRESET qs or 

%$1'qj on the remote to select the band.

3UHVV35(6(7RU±6 to tune in the stored 

station.

Connecting optional components

You can enjoy the sound from an optional component 
such as a portable digital music player through the 
speakers of this unit. Be sure to turn off the power of 
each component before making any connections. For 
details, refer to the instruction manual of the component 
to be connected.

Connect the A8',2,1MDFk q; on the unit to 

WKHOLQHRXWSXWMDFk of the portable digital music 

player or other components using an audio 

connecting cable (not supplied).

Turn the unit and the connected component on.

Press A8',2,1qs and start playing sound on 

the connected component.
The sound from the connected component is output 
from the speakers. 

To connect the unit to a TV or VCR, use an extension 
cable (not supplied) with a stereo-mini jack on one 
end and two phono plugs on the other end.

Playing a CD

Press CD qs (direct power-on).

Press 

Z PUSH 23(1&/26(7 and place a disc 

with the label side up in the CD compartment.
To close the CD compartment, press 

Z PUSH OPE1/

CLOSE 7.

Press 

u 8.

The player plays all the tracks once.

Track Playing

number

time

Pause playback

u

8

To resume play, press it again.

Stop playback

x

8

Go to the next 
track

>

6

Go back to the 
previous track

.

6

Locate a point 
while listening to 
the sound

>

 (forward) or 

.

 (backward) 

6 while playing and hold it until 
you find the point.

find the point.

Locate a point 
while observing 
the display

>

 (forward) or 

.

 (backward) 

6 in pause and hold it until you 

Remove the CD

Z

 PUSH OPE1/CLOSE 7

Using the display

In stop mode, press DISPLAY‡E1TER 5 or DISPLAY 

5 on the remote.

Press DISPLAY‡E1TER 5 or DISPLAY 5 on the 
remote repeatedly while playing a CD. The display 
changes as follows:

The current track number and playing time

B

r

The current track number and the remaining 
time of the current track*

r

The number of tracks left and remaining 
time on the CD

* For a track whose number is more than 20, the remaining time 

appears as “- -:- -” in the display.

•  This set can be disassembled in the order shown below.