Sony ZS-PE40CP (serv.man2) Service Manual ▷ View online
ZS-PE40CP
5
Note: Follow the disassembly procedure in the numerical order given.
2-2. PANEL (FRONT) BLOCK
Note 2: When installing the flexible flat
cable, ensure the colored line.
No slanting after insertion.
Note 1: Please spread a sheet under
a unit not to injure grill side.
CD OPEN
9 connector
(CN1002)
8 connector
(CN1001)
0 connector
(CN805)
7 Remove the panel (front)
block in the direction of
an
arrow.
– Front bottom view –
2 Lift up the telescopic
antenna.
1 battery lid assy
3 four tapping screws
(BV
B2.6)
3 tapping screw
(BV
B2.6)
3 two tapping screws
(BV
B2.6)
3 two tapping screws
(BV
B2.6)
– Rear bottom view –
qs flexible flat cable
(4P)
(CN606)
qa flexible flat cable
(6 core) (CN607)
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat
cable
cable
flexible flat
cable
cable
connector
connector
OK
NG
5 three tapping screws
(BV
B2.6)
6 two claws
6 two claws
qd panel (front) block
4 Open the CD lid.
:ire VettinJ
Flexible flat cables at the lower of
screw holes.
screw holes.
Flexible flat cables at the upper of
screw holes.
screw holes.
OK
NG
:ire VettinJ
KEY (L) board
The flexible flat cable (6 core) passes through
the lower side of the wire.
the lower side of the wire.
USB board
ZS-PE40CP
6
2-3. CABINET (REAR) BLOCK
3 connector
(CN1)
4 cabinet (rear) block
guide line
telescopic
antenna wire
antenna wire
tape
(sub material)
(sub material)
1 three tapping screws
(BV
B2.6)
1 three tapping screws
(BV
B2.6)
2 Remove the chassis (main) block
in the direction of an arrow.
LCD board
LCD board
:LUHVHWWLQJ
:LUHVHWWLQJ
–)URQWERWWRPYLHZ–
Flexible flat cables at the lower of
screw holes.
screw holes.
Flexible flat cables at the upper of
screw holes.
screw holes.
OK
NG
1 two tapping screws
(BV
B2.6)
ZS-PE40CP
7
2-4. JACK BOARD
1 tapping screw
(BV
B2.6)
2 Remove the JACK board block
in the direction of an arrow.
– Rear top view –
6 JACK board
5 connector
(CN351)
4 connector
(CN352)
3 connector
(CN353)
OK
NG
Speaker wire is not floated.
Speaker wire is floated and
touching the wire from MAIN board.
touching the wire from MAIN board.
:ire VettiQJ
ZS-PE40CP
8
2-5. MAIN BOARD
6 connector
(CN985)
OK
NG
OK
NG
3 five tapping screws
(BV
B2.6)
4 Remove the MAIN board
block in the direction of
an
arrow.
:LUHVHWWLQJ
–5HDUERWWRPYLHZ–
–0$,1ERDUGIURQWYLHZ–
7 MAIN board
fuse (F983)
MAIN board
POWER board
POWER board
Wire is not touch the fuse (F983).
Wire is not touch the fuse (F983).
MAIN board
fuse (F983)
2 flexible flat cable
(18 core) (CN802)
1 flexible flat cable
(22P)
(CN801)
5 flexible flat cable
(26 core) (CN603)
OK
NG
Cover the connector
MAIN board
MAIN board
MAIN board
J140
J140
MAIN board
MAIN board
tape (sub material)
tape
(sub material)
(sub material)
X1
X801
CN2
Note: Check that not covering the JW140.
Click on the first or last page to see other ZS-PE40CP (serv.man2) service manuals if exist.