DOWNLOAD Sony TA-VE800G Service Manual ↓ Size: 1.22 MB | Pages: 50 in PDF or view online for FREE

— 21 —

— 22 —

1

Screw (BVTP 3x8)

7

Flat type wire (21 core) (CNS402)

6

Flat type wire (17 core) (CNJ203)

5

Flat type wire (21 core) (CNS702)

8

Front panel assembly

2

Screw (BVTP 3x8)

3

Screw (BVTP 3x8)

4

Remove the connector

 Follow the disassembly procedure in the numerical order given.

— 23 —

OSD board
JW10
(FS CHECK)

frequency counter

Method:
1. Press the POWER button without connecting anything to the ex-

ternal input terminal (VIDEO IN etc.).

2. Adjust CT202 of the OSD board so that the reading on the fre-

quency counter becomes 17.734475 MHz 

±

 40 MHz.

SET

Monitor

TM201

!•

PIN (GROUND)

Method:
1. With the power turned OFF, press the TAPE MONITOR button

and VIDEO 2 button simultaneously and turn on the power. The
position of the OSD image set by the user will be cleared and set
to position set at shipment.

2. The OSD function frame will be displayed on the monitor. This

screen will disappear in a few seconds automatically when the
input of codes using the remote commander stops.
If it disappears during adjustments, move the cursor of the at-
tached remote commander. The screen will appear again.

3. While watching the monitor screen, adjust CT201 of the OSD

board so that the following standard is satisfied.

TM201

!ª

PIN (VIDEO)

monitor screen

B

A

OSD function frame

NOTE:
Extra margin is provided in this adjustment in consideration of the
deviation of the screen according to the type of monitor used.
Consequently, the user is able to adjust the position of the screen
freely. (For details, refer to “Adjustment of OSD Screen Position” in
1. Service Note. Refer to page 3.)

Adjustment standard:
Adjust so that the width A of the OSD function frame becomes the
same as space B of the monitor screen.

— 24 —

J209

J210

Video frequency

CT202

CT201

JW10

OSD width

20

21

TM201

2

1

OSD width

!ª

(VIDEO)

!•

(GROUND)