DOWNLOAD Sony DSC-W670 (serv.man2) Service Manual ↓ Size: 432.81 KB | Pages: 10 in PDF or view online for FREE

DSC-W670_ADJ

2012F08-1

© 2012.06

1.0

2012.02

Official Release

—

—

1.1

2012.06

Revised-1
(A1 12-116)

•  Addition of Writing Lens data code.
•  Addition of Setting Default Gyro Value.
 Page 

5-2

, 

5-3

, 

5-4

, 

5-5

, 

5-6

, 

5-7

, 

5-8

, 

5-9

, 

5-10E 

Yes

DSC-W670_ADJ

5-2

When replacing these parts, adjust the items indicated by “ z ” in the following table.

Adjustment item

Replaced parts 

X6 Lens Unit

CCD Block Assy

Main Board Assy

ST Board Assy

Main Frame Assy

Writing Lens data code

z

z

Setting Default Gyro Value

z

z

Focus Adjustment

z

z

z

OB Adjustment

z

z

z

WB/AGC Adjustment

z

z

z

MeShut80 Adjustment

z

z

z

Dark DP Adjustment

z

z

z

Light/S.S Adjustment

z

z

z

Flash WB Adjustment

z

z

z

z

AF Lamp Check

z

Lens Option

z

Set Language Destination

z

Personal computer
(Note)

J-1

J-3

J-5

J-4

Clear chart
J-6082-560-A

J-6

9 colors chart
J-6082-562-A

J-7

Mini flange back jig

J-6082-719-A

or

Flange back

adjustment jig

J-6082-563-A

or

Infinity jig (1000mm)

J-6082-747-A

J-2

Small pattern box
PTB-1450
J-6082-557-A

J-9

Camera table
J-6082-384-A

J-8

Dedicated USB cable
1-834-311-51

Rechargeable
battery pack
NP-BN1
or
NP-BN

J-10

Background paper
J-2501-130-A

SD-Card

Note:
Personal computer
OS 

: Windows2000/XP  Home/XP  Pro/Vista/7

RAM  : 256 MB (1 GB: Vista/7) or more recommended
USB  : 2.0 recommended (also compatible with 1.1)

Following are keys and functions used in adjustment. (Fig. 5-1-2)

z

 button (OK Key)

b 

button (Left Key)

v

 

button (Up Key)

B

 

button

(Right Key)

V

 

button (Down Key)

Control button

W/T (Zoom) button 

 (Playback) button

ON/OFF (Power) button 

Insert the SD-Card and the Battery pack as shown below. (Fig. 5-1-3)

Ensure the notched corner faces correctly.

Eject lever

Note:
Use the fully charged Battery pack in adjustment.

Set the camera on the Camera table. (Fig. 5-1-4)

Camera table
(J-6082-384-A)

The changed portions from
Ver. 1.0 are shown in blue.

DSC-W670_ADJ

5-3

The MB (Main Board)/LCD Function Check order is as follows.

If NG appears for more than one check item, confirm the adjusting 
environment and recheck. (Fig. 5-2-4)

Ver : 01.0000

RTC :

Iris :

MSHUT :

ZOOM :

STROB :

CARD :

Mem :

AUDIO:

Diff -

Cal Err

NG

-OK

-OK

-OK

-OK

-OK

-NG

-OK

RE

-OK

51

 

Example:  NG appears for  

CARD.

1)  Check that the camera is on the adjustment mode.

 Note:
 

For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).

2)  Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-2-2)

3)  Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “MB/LCD”, 
 

press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.

 Note:
 

If the check is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the check. (Page 5-3)

4)  Confirm the indication on the screen.
 

If OK appears for all check items, press the “ 

 (Playback)” button 

to return to adjustment menu. (Fig. 5-2-3)

Ver : 01.0226

RTC :

Iris :

MSHUT :

ZOOM :

STROB :

CARD :

Mem :

AUDIO:

Diff -

FINISH

OK

-OK

-OK

-OK

-OK

-OK

-OK

-OK

RE

-OK

37

 

Item

Description

RTC

Compare Crystal RTC time and OS time. If Crystal RTC time and OS time are the same, conform to spec.

Iris

Change difference aperture to check their luminance value. If it has different luminance value, conform to spec.

MSHUT

Change difference Mechanical Shutter ON/OFF to check their luminance value. If it has different luminance value,  
conform to spec.

ZOOM

Change difference Lens ZOOM IN/OUT position to check their zoom position value. If it has different zoom position
value, conform to spec.

STROB

Strobe board flash function, check if it can be triggered or not.

CARD

Check Memory card socket can be read/written.

Mem

Check Internal memory size, conform to spec.

AUDIO

REC/PLAY audio file, check Microphone and Speaker are working.

When performing adjustments using the 9 colors chart, insert the 
transparent window in the lower right position. (Fig. 5-2-1)

Small pattern box

9 colors chart

Transparent window

 

1)  Download the adjustment tool “ADJ_Tool_W670_Ver[][][].zip” from the TISS homepage.
 

Uncompress the “ADJ_Tool_W670_Ver[][][].zip”, then confirm that it includes the following items.

• EnableTest.txt
•  USB Driver (Folder)
• Service Tool (Folder)

 

The above two folders “USB Driver” and “Service Tool” are used in “5-3-

12

. Set Language Destination”. (Page 5-9)

2)  Download the adjustment tool “Sub_ADJ_Tool_W670.zip” from the TISS homepage.
 

Uncompress the “Sub_ADJ_Tool_W670.zip”, then confirm that it includes the following items.

• W670_Set_Default Gyro Value_v[][][].zip
• W670_Write_Lens Code_v[][][].zip

 

The above two files “W670_Set_Default Gyro Value_v[][][].zip” and “W670_Write_Lens Code_v[][][].zip” are used in “5-3-1. Writing Lens data 
code” and “5-3-2. Setting Default Gyro Value”. (Page 5-4)

3

)  Save the uncompressed file “EnableTest.txt” in the root directory of the SD-Card after formatting the it.

  Saving it in other directories causes a malfunction of program.
  Save the SD-Card after confirming that the “EnableTest.txt” is empty.
  Be sure to format the SD-Card on the camera.
  If “EnableTest.txt” is still remained after the adjustment, delete it.

4

)  With the camera turned off, insert the SD-Card with the “EnableTest.txt” into the Memory card slot of the camera.

5

)  Press the “ 

 (Playback)” button while pressing the “T (W/T)” button and the Control button “ z ”.

6

)  After a few seconds, the Adjustment mode screen will appear on the LCD display. (Fig. 5-1-5)

7

)  Press the “ 

 (Playback)” button, the initial screen for the adjustment mode will appear. (Fig. 5-1-6)

 

Ver : 1.0000

BoxNo:00000015

DscID:80800934

MB/LCD
AF Clbt
OB Clbt
Wb/Agc
MeShut26
MeShut80
Light/S.S
Dark DPC
FlashWB

OK
OK
OK
OK
OK
OK
OK
OK
OK

OK
OK
OK
OK
OK
OK
OK

USB Mode
Boot Type
Auto Clbt
AF Lamp
OIS Check
LensOption
SonyBatt.
CKS 98515886

CT35100

Index : 12

1.0000

A0BB7K000005

Index : 12

HW : 0

CLBTINFO

V

V

V

FOCUS

OBCLBT

WB/AGC

(Infinity)

(BLACK)

(LY10)

 

 

The item that has been adjusted may be disabled to be readjusted. 
If the readjustment is required, or when replacing X6 Lens Unit, CCD Block Assy and ST Board Assy, it is necessary to enable 
the adjustment upon the following procedure.

1)  Press the Control button “ b ” “ B ” and “ v ” “ V ” to choose an adjustment item.

2)  Press the “ 

 (Playback)” button.

3)  Press the Control button “ b ”.
 (Disable 

“00001” 

→ Disable “00000”) (Fig. 5-1-7)

Example: For MB/LCD

 

1.0000

A0BB7K000005

Index : 12

HW : 0

CLBTINFO

V

V

V

FOCUS

OBCLBT

WB/AGC

(Infinity)

(BLACK)

(LY10)

Disable

00000

Capture

00000

FocusOnly

00001

AFClbtPass

00000

1.0000

A0BB7K000005

Index : 12

HW : 0

CLBTINFO

V

V

V

FOCUS

OBCLBT

WB/AGC

(Infinity)

(BLACK)

(LY10)

Disable

00001

Capture

00000

FocusOnly

00001

AFClbtPass

00000

 

 

 

Equipment required: Small pattern box (PTB-1450)

Cover camera lens and
Small pattern box (PTB-1450)

(All black)

9 colors chart

Small pattern box
(PTB-1450)

5 mm or less

Black cloth

Camera

 

The changed portions from
Ver. 1.0 are shown in blue.

DSC-W670_ADJ

5-4

Perform the this operation additionally when replacing Main board or Lens.

The numbers downward of two-dimensional
black and white symbols.
Read the value with using a magnifier,
and make a note as "Lens data code". 
e.g. 
+000+000-002-039

Side of Lens

 

Preparations: 
 

Uncompress the “W670_Write_Lens Code_v[][][].zip” in any place of the PC, then confirm that it includes the following items.

    

Write_LensCode_v[][][].exe

    

UI43Api.dll 

 

The USB Driver is sane as “5-3-12. Set Language Destination”. 

1)  Check that the camera is on the adjustment mode.
 

Connect the camera and the PC. 

2)  Double click the “Write_LensCode.exe” to start up the writing tool. 

 
 (Fig. 

3)  Input the “Lens data code”, then press the “Write” button. (Fig. 5-3-3)

 
 (Fig. 

4)  In case of the setting is finished normally, the setting completion indication appears on the screen. (Fig. 5-3-4)
 

The power of the camera turns off automatically.

 
 (Fig. 

Perform the this operation additionally when replacing Main board or Lens.

Preparations: 
 

Uncompress the “W670_Set_Default Gyro Value_v[][][].zip” in any place of the PC, then confirm that it includes the following items.

    

Set_DefaultGyro_v[][][].exe

    

UI43Api.dll 

The USB Driver is sane as “5-3-12. Set Language Destination”. 

1)  Check that the camera is on the adjustment mode.
 

Connect the camera and the PC. 

2)  Double click the “Set_DefaultGyro.exe” to start up the writing tool. (Fig. 5-3-5)
3)  Press the “Set Default ” button. 

 
 (Fig. 

4)  In case of the setting is finished normally, the setting completion indication appears on the screen. (Fig. 5-3-6)
 

The power of the camera turns off automatically.

 
 (Fig.