DOWNLOAD Sony TA-SA500WR / TA-SA600WR / TA-SA700WR Service Manual ↓ Size: 2.15 MB | Pages: 30 in PDF or view online for FREE

1.0

2014.01

New

1.1

2014.04

Addition of Chinese, Taiwan and Thai models (TA-SA500WR/SA600WR).

Addition of Singapore model (TA-SA500WR/SA600WR/SA700WR).

Change P/N for Ref No.4 in page 23 and 28.

Change P/N of L551 and L571 in WLK6-MAIN board.

Change P/N of R241 in WLK6-MAIN board.

Change of WLK6-MAIN board (Suffi x 12).

Delete Servicing Notes for IC201 in WLK6-MAIN board.

1.2

2014.06

Addition of Russian, Chilean and Peruvian models (TA-SA500WR/SA600WR).

Add Ref. No. 58 in page 24 and page 28.

Change P/N for Ref. No. 4 in page 23 and page 28.

1.3

2014.09

Addition of Argentina model (TA-SA500WR/SA600WR).

Change P/N for Ref. No. 4 in page 23 and 28.

Change P/N for Ref. No. 54 in page 24 and 28 (TA-SA500WR/SA600WR).

Delete of CORE, FERRITE and CABLE TIE in page 4, 5 ,6, 7, 8, 23, 24 and 28.

Delete of D551, D552, D553, D554, D571, D572, D573 and D574 in WLK6-MAIN board.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note: If you still see the original page, press the [Enter] key again.

1.0

2014.01

New

1.1

2014.04

Addition of Chinese, Taiwan and Thai models (TA-SA500WR/SA600WR).

Addition of Singapore model (TA-SA500WR/SA600WR/SA700WR).

Change P/N for Ref No.4 in page 23 and 28.

Change P/N of L551 and L571 in WLK6-MAIN board.

Change P/N of R241 in WLK6-MAIN board.

Change of WLK6-MAIN board (Suffi x 12).

Delete Servicing Notes for IC201 in WLK6-MAIN board.

1.2

2014.06

Addition of Russian, Chilean and Peruvian models (TA-SA500WR/SA600WR).

Add Ref. No. 58 in page 24 and page 28.

Change P/N for Ref. No. 4 in page 23 and page 28.

1.3

2014.09

Addition of Argentina model (TA-SA500WR/SA600WR).

Change P/N for Ref. No. 4 in page 23 and 28.

Change P/N for Ref. No. 54 in page 24 and 28 (TA-SA500WR/SA600WR).

Delete of CORE, FERRITE and CABLE TIE in page 4, 5 ,6, 7, 8, 23, 24 and 28.

Delete of D551, D552, D553, D554, D571, D572, D573 and D574 in WLK6-MAIN board.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note: If you still see the original page, press the [Enter] key again.

1.0

2014.01

New

1.1

2014.04

Addition of Chinese, Taiwan and Thai models (TA-SA500WR/SA600WR).

Addition of Singapore model (TA-SA500WR/SA600WR/SA700WR).

Change P/N for Ref No.4 in page 23 and 28.

Change P/N of L551 and L571 in WLK6-MAIN board.

Change P/N of R241 in WLK6-MAIN board.

Change of WLK6-MAIN board (Suffi x 12).

Delete Servicing Notes for IC201 in WLK6-MAIN board.

1.2

2014.06

Addition of Russian, Chilean and Peruvian models (TA-SA500WR/SA600WR).

Add Ref. No. 58 in page 24 and page 28.

Change P/N for Ref. No. 4 in page 23 and page 28.

1.3

2014.09

Addition of Argentina model (TA-SA500WR/SA600WR).

Change P/N for Ref. No. 4 in page 23 and 28.

Change P/N for Ref. No. 54 in page 24 and 28 (TA-SA500WR/SA600WR).

Delete of CORE, FERRITE and CABLE TIE in page 4, 5 ,6, 7, 8, 23, 24 and 28.

Delete of D551, D552, D553, D554, D571, D572, D573 and D574 in WLK6-MAIN board.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note: If you still see the original page, press the [Enter] key again.

1.0

2014.01

New

1.1

2014.04

Addition of Chinese, Taiwan and Thai models (TA-SA500WR/SA600WR).

Addition of Singapore model (TA-SA500WR/SA600WR/SA700WR).

Change P/N for Ref No.4 in page 23 and 28.

Change P/N of L551 and L571 in WLK6-MAIN board.

Change P/N of R241 in WLK6-MAIN board.

Change of WLK6-MAIN board (Suffi x 12).

Delete Servicing Notes for IC201 in WLK6-MAIN board.

1.2

2014.06

Addition of Russian, Chilean and Peruvian models (TA-SA500WR/SA600WR).

Add Ref. No. 58 in page 24 and page 28.

Change P/N for Ref. No. 4 in page 23 and page 28.

1.3

2014.09

Addition of Argentina model (TA-SA500WR/SA600WR).

Change P/N for Ref. No. 4 in page 23 and 28.

Change P/N for Ref. No. 54 in page 24 and 28 (TA-SA500WR/SA600WR).

Delete of CORE, FERRITE and CABLE TIE in page 4, 5 ,6, 7, 8, 23, 24 and 28.

Delete of D551, D552, D553, D554, D571, D572, D573 and D574 in WLK6-MAIN board.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note: If you still see the original page, press the [Enter] key again.