Sony TA-FA1200ES Service Manual ▷ View online
5
TA-FA1200ES
DISCHARGING THE CAPACITORS
CNP5301
brown
black
connector
C36
DC board
In checking the board, connect the lead of
brown and black by resistance and make
a capacitor discharge of C36 for electric shock
prevention.
brown and black by resistance and make
a capacitor discharge of C36 for electric shock
prevention.
800
Ω
/2W
MAIN DIF board
C5331
C5331
In checking the board, make a capacitor
discharge of C5331 for electric shock
prevention.
discharge of C5331 for electric shock
prevention.
800
Ω
/2W
6
TA-FA1200ES
MAIN DIF BOARD SERVICE POSITION
HARNESS SETTING
clip
MAIN DIF board
lead wire
lead wire
lead wire
chassis
ground point
ground point
ground point
hole
Solder three lead wires to three grand points of MAIN DIF board.
Connect each grand point and chassis with a clip.
Connect each grand point and chassis with a clip.
partition of hole
lead from transformer
ribbon cable
7
TA-FA1200ES
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Front panel
Location of Parts and Operation
Name
Function
A
POWER
Press to turn the
amplifier on or off.
amplifier on or off.
B
AUTO CAL MIC
jack
jack
Connects to the
supplied optimizer
microphone for the
Auto Calibration
function.
supplied optimizer
microphone for the
Auto Calibration
function.
G
MUTING
Press to activate the
muting function.
muting function.
H
PHONES jack
Connects to
headphones.
headphones.
I
SPEAKERS
(OFF/A/B/A+B)
(OFF/A/B/A+B)
Turn to select OFF, A,
B, A+B of the speakers.
B, A+B of the speakers.
J
INPUT
SELECTOR
SELECTOR
Turn to select the input
source to play back.
source to play back.
K
VOLUME
Turn to adjust the
volume level of
speakers.
volume level of
speakers.
Name
Function
Name
Function
D
Remote sensor
Receives signals from
the remote.
the remote.
E
Display
The current status of
the selected component
or a list of selectable
items appears here.
the selected component
or a list of selectable
items appears here.
F
DIRECT
Press to bypass the
TONE function to
listen to better quality
sound.
TONE function to
listen to better quality
sound.
Note
When you play back a DTS
96/24 format disc, set the
DIRECT function to ON.
If the DIRECT function is set
to OFF, the DTS signal is
played back at 48 kHz.
96/24 format disc, set the
DIRECT function to ON.
If the DIRECT function is set
to OFF, the DTS signal is
played back at 48 kHz.
C
TONE
BASS/TREBLE
BASS/TREBLE
Turn to adjust the
BASS and TREBLE
levels.
The level can be
adjusted from –10 dB
to +10 dB.
BASS and TREBLE
levels.
The level can be
adjusted from –10 dB
to +10 dB.
Rear panel
A
AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a Super
Audio CD player,
tape deck, MD deck
or DAT player, etc.
Audio CD player,
tape deck, MD deck
or DAT player, etc.
B
DIGITAL INPUT/OUTPUT section
COAXIAL IN
jacks
jacks
Connects to a DVD
player, Super Audio
CD player, etc. The
COAXIAL jacks
provide a better
quality sound.
player, Super Audio
CD player, etc. The
COAXIAL jacks
provide a better
quality sound.
OPTICAL IN/
OUT jack
OUT jack
C
SPEAKERS section
Connects to speakers.
D
IMPEDANCE SELECTOR
Set the appropriate speaker impedance for the
speakers you are using.
speakers you are using.
L
R
8
TA-FA1200ES
Remote commander
RM-AAU010
Name
Function
A ?
/
1
(on/standby)
Press to turn the amplifier on or
off.
off.
B U/u/I/i
ENTER
After pressing MENU (9),
press U/u, I or i to select the
settings. Then press ENTER to
enter the selection.
press U/u, I or i to select the
settings. Then press ENTER to
enter the selection.
C
Input
buttons
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the amplifier
turns on.
select the component you want
to use. When you press any of
the input buttons, the amplifier
turns on.
D
BALANCE
L/R
L/R
Press to adjust the balance
between left and right speakers.
Both the left and the right
balance can be adjusted from 0
dB to +20 dB. The initial setting
is 0 dB (center).
between left and right speakers.
Both the left and the right
balance can be adjusted from 0
dB to +20 dB. The initial setting
is 0 dB (center).
E
BASS/
TREBLE +/–
TREBLE +/–
Press to adjust the BASS and
TREBLE levels. The level can
be adjusted from –10 dB to +10
dB.
TREBLE levels. The level can
be adjusted from –10 dB to +10
dB.
F
DIMMER
Press to adjust brightness of the
display.
display.
G
VOLUME +/–
Press to adjust the volume level
of speakers.
The level can be adjusted from
–
of speakers.
The level can be adjusted from
–
∞ dB to +23 dB.
H
SLEEP
Press to activate the Sleep
Timer function and the duration
which the amplifier turns off
automatically.
The Sleep Timer can be set to
30, 60, 90, or 120 minutes.
Timer function and the duration
which the amplifier turns off
automatically.
The Sleep Timer can be set to
30, 60, 90, or 120 minutes.
I
MENU
Press to display the menu for
the amplifier.
the amplifier.
J
DIRECT
Press to bypass the TONE
function to listen to better
quality sound.
function to listen to better
quality sound.
Note
When you play back a DTS 96/24
format disc, set the DIRECT
function to ON.
If the DIRECT function is set to
OFF, the DTS signal is played back
at 48 kHz.
format disc, set the DIRECT
function to ON.
If the DIRECT function is set to
OFF, the DTS signal is played back
at 48 kHz.
K
MUTING
Press to activate the muting
function.
function.
Click on the first or last page to see other TA-FA1200ES service manuals if exist.