Sony STR-DA4400ES Service Manual ▷ View online
STR-DA4400ES
13
Name
Function
Name
Function
a)
See the table on page 123 for information on the
buttons that you can use to control each
component.
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (TV/5,
/, PRESET +/TV CH +). Use as a mark of
operation.
/, PRESET +/TV CH +). Use as a mark of
operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
FT DISPLAY
Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
FE RETURN/
EXIT 0
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
FG CATEGORY
+/–
Press to select the category for
satellite tuner.
satellite tuner.
#·/·C
Press to select an album.
FH DISC SKIP
Press to skip a disc when using
a multi-disc changer.
a multi-disc changer.
FI MASTER
VOL +/–
Press to adjust the volume level
of all speakers at the same time.
of all speakers at the same time.
TV VOL +/–
Press TV (XG), then press TV
VOL +/– to adjust the volume
level of the TV.
level of the TV.
FK MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
temporarily. Press the button
again to restore the sound.
FL BD/DVD/
TOP MENU,
MENU
MENU
Press to display the menus of
the DVD player on the TV
screen. Then use 7/W/#/C and
the DVD player on the TV
screen. Then use 7/W/#/C and
to perform a menu
operations.
MACRO1,
MACRO2
MACRO2
Press AMP (), then press
MACRO 1 or MACRO 2 to set
up the macro function.
up the macro function.
Sub remote commander (RM-
AAU038)
This remote can only be used to operate the
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
Name
Function
" / (on/
standby)
Press to turn a receiver on or off.
# 2CH/
A.DIRECT
Press to select sound field.
A.F.D.
MOVIE
MUSIC
$ GUI MODE
Press to switch the display
mode of the menu between GUI
MODE (to display the menu on
the TV screen) and DISPLAY
MODE (to display the menu in
the display window).
mode of the menu between GUI
MODE (to display the menu on
the TV screen) and DISPLAY
MODE (to display the menu in
the display window).
%
7W#C
After pressing SCREEN/DSPL
CONTROL (), press 7/W/#/
C to select the menu item. Then
CONTROL (), press 7/W/#/
C to select the menu item. Then
press
to enter the selection.
& OPTIONS
Press to display and select items
from option menus.
from option menus.
' MENU
Press to display the menu to
operate the receiver.
operate the receiver.
( DMPORT
Press to operate the component
connected to the DIGITAL
MEDIA PORT adapter.
connected to the DIGITAL
MEDIA PORT adapter.
/*
Starts play.
Y
Stops play.
/
Skips tracks.
) INPUT
SELECTOR
Press to select the input source
to play back.
to play back.
* MASTER
VOLUME
+*/–
+*/–
Press to adjust the volume level.
+ MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
temporarily. Press the button
again to restore the sound.
, RETURN/
EXIT
Press to return to the previous
menu or exit the menu.
menu or exit the menu.
- DISPLAY
Press to select information
displayed in the display
window.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
displayed in the display
window.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
. PIP
Press PIP to switch the image of
the PIP (Picture in Picture)
window. The image will be
changed as follows. EXT
VIDEO U ZONE 2 VIDEO
U OFF. You can swap the
the PIP (Picture in Picture)
window. The image will be
changed as follows. EXT
VIDEO U ZONE 2 VIDEO
U OFF. You can swap the
position of the main screen and
the PIP window (swap) by
pressing the
the PIP window (swap) by
pressing the
(). You can
expand or shrink the window
using 7/W (). You can also
using 7/W (). You can also
change the window’s position
using #/C ().
using #/C ().
Note
The HDMI video signals are not
output while the PIP window is
displayed.
The HDMI video signals are not
output while the PIP window is
displayed.
STR-DA4400ES
14
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. CASE
(Page
(Page
15)
3-4. D-CONNECT
BOARD,
DSP
BOARD,
DIGITAL
BOARD,
CIS
BOARD
AND
CONTROL
BOARD
(Page
16)
3-7. S-VIDEO
BOARD
AND
A-VIDEO
BOARD
(Page
17)
3-8. FLI-1.8REG
BOARD
AND
ANALOG
BOARD
(Page
18)
3-9. POWER
TRANSFORMER
(T001),
E-VOL
BOARD
AND
MAIN
BOARD
(Page
19)
SET
3-6. FRONT PANEL BLOCK
(Page
(Page
17)
3-10. HEART SINK BLOCK
(Page
(Page
20)
3-3. SP-TM
BOARD,
TUNER
(FM/AM)
(Page
15)
3-5. D-VIDEO
BOARD
(Page
16)
STR-DA4400ES
15
3-3. SP-TM BOARD, TUNER (FM/AM)
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE
flat head screw
(TP)
(TP)
case
two screws
(BVST4 × 8)
two flat head screws
(TP)
(TP)
two spacers (case)
two screws
(BVST4 × 8)
tuner (FM/AM)
wire (flat type) (9 core)
(tuner
(tuner
(FM/AM))
SP-TM board
four connectors
(CX4101,
(CX4101,
CX4102
CX4103,
CX4104)
two screws (BV/ring)
two screws
(BVTT2.6 × 6)
clamp
clamp
clamp
STR-DA4400ES
16
3-5. D-VIDEO BOARD
3-4. D-CONNECT BOARD, DSP BOARD, DIGITAL BOARD, CIS BOARD AND CONTROL BOARD
RE DIGITAL board
RT bracket (AC)
connector (CN2203)
connector
(CN5001)
(CN5001)
D-CONNECT board
R DSP board
two screws
(BVTP3
(BVTP3
× 8)
eight screws
(BVTP3
(BVTP3
× 8)
RG two screws
(BVTP3
(BVTP3
× 8)
RK screw (BVTP3 × 8)
RB two screws
(BVTP3
(BVTP3
× 8)
four screws
(BVTP3
(BVTP3
× 8)
two connectors
(CN2204,
(CN2204,
CN2207)
RI CIS board
XB CONTROL board
RH
RM
RL three connectors
(CN2012,
(CN2012,
CN2013,
CN2014)
X connector (CN2002)
six connectors
(CN2401, CN2402, CN2403,
(CN2401, CN2402, CN2403,
CN2404, CN2405, CN2406)
five connectors
(CN3509,
(CN3509,
CN3523,
CN3605,
CN3611,
CN3902)
two screws
(BV3)
(BV3)
RB D-VIDEO board
screw
(BVTP3
(BVTP3
× 8)
clamp
bracket (HDMI)
two HS holders
heat sink (S58)
R radiation sheet (F)
screw
(BVTP3
(BVTP3
× 8)
seven screws
(B3
(B3
× 6)
Click on the first or last page to see other STR-DA4400ES service manuals if exist.