Sony STR-DA1200ES Service Manual ▷ View online
9
STR-DA1200ES
HARNESS SETTING
front panel block
POWER SW board
Please band together so that a ribbon cable
does not approach a primary side
of POWER SW board.
does not approach a primary side
of POWER SW board.
Please band the cable from a VIDEO 3 board
together in this position.
together in this position.
Please band together so that the ribbon cable
from a DIGITAL board cannot touch a heat sink.
from a DIGITAL board cannot touch a heat sink.
DIGITAL
board
board
heat sink
heat sink
Please band together by purse lock
so that a cable cannot touch a heat sink.
so that a cable cannot touch a heat sink.
Please band together so that a primary side
cable cannot touch a power transformer.
cable cannot touch a power transformer.
power
transformer
Please band together so that a cable cannot touch
a power transformer and a heat sink.
a power transformer and a heat sink.
Please band together so that the ribbon cable (5pin) to AC board
and the ribbon cable (4 pin) from SP TERMNAL board
do not approach the primary side parts of AC board.
and the ribbon cable (4 pin) from SP TERMNAL board
do not approach the primary side parts of AC board.
SP TERMNAL board
AC board
10
STR-DA1200ES
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
To remove the cover
Press PUSH.
When you remove the cover, keep it out of reach from
When you remove the cover, keep it out of reach from
children.
Front panel
Name
Function
A
POWER
Press to turn the receiver on or
off.
off.
B
AUTO CAL MIC
jack
jack
Connects to the supplied
optimizer microphone for the
Digital Cinema Auto
Calibration function.
optimizer microphone for the
Digital Cinema Auto
Calibration function.
C
TONE MODE
Adjusts FRONT BASS and
FRONT TREBLE.
Press TONE MODE repeatedly
to select BASS or TREBLE,
then turn TONE to adjust the
Press TONE MODE repeatedly
to select BASS or TREBLE,
then turn TONE to adjust the
level.
TONE
D
MEMORY/
ENTER
ENTER
Press to operate a tuner
(FM/AM).
(FM/AM).
TUNING MODE
TUNING
E
Remote sensor
Receives signals from remote
commander.
commander.
F
DIMMER
Press to adjust brightness of the
display.
G
SLEEP
Press to activate the SLEEP
function.
function.
H
SUR BACK
DECODING
DECODING
Press to activate SB
DECODING.
DECODING.
I
Display
window
window
The current status of the
selected component or a list of
selectable items appears here.
selected component or a list of
selectable items appears here.
J
2CH
Press to select sound field.
A.F.D.
MOVIE
MUSIC
K
DISPLAY
Press to select the input mode
when the same components are
connected to both digital and
analog jacks.
when the same components are
connected to both digital and
analog jacks.
INPUT MODE
Name
Function
L
MULTI CH IN
Press to select the audio input
signal from the component
connected to the MULTI
CHANNEL INPUT jack.
signal from the component
connected to the MULTI
CHANNEL INPUT jack.
M
A.DIRECT
Press to listen to high quality
analog sound.
analog sound.
N
PHONES jack
Connects to headphones.
O
SPEAKERS
(OFF/A/B/A+B)
(OFF/A/B/A+B)
Press to select A, B, A+B, OFF
of the front speakers.
of the front speakers.
P
VIDEO 3 IN/
PORTABLE AV
IN jack
PORTABLE AV
IN jack
Connect to a portable audio/
video component such as a
camcorder or video game.
video component such as a
camcorder or video game.
Q
MULTI
CHANNEL
DECODING
lamp
CHANNEL
DECODING
lamp
Lights up when multichannel
audio signals are decoded.
audio signals are decoded.
R
INPUT
SELECTOR
SELECTOR
Turn to select the input source
to play back.
to play back.
S
MASTER
VOLUME
Turn to adjust the volume level
of all speakers at the same time.
of all speakers at the same time.
Name
Function
Rear panel
A
DIGITAL INPUT/OUTPUT section
OPTICAL IN/
OUT jacks
OUT jacks
Connects to a DVD player,
Super Audio CD player,
etc. The COAXIAL jack
provides a better quality
sound.
Super Audio CD player,
etc. The COAXIAL jack
provides a better quality
sound.
COAXIAL IN
jacks
jacks
HDMI IN/
MONITOR
OUT jacks
MONITOR
OUT jacks
Connects to a DVD player,
or a satellite tuner. An
image and the sound are
output to TV or a projector.
or a satellite tuner. An
image and the sound are
output to TV or a projector.
B
ANTENNA section
FM ANTENNA
jack
jack
Connects to the FM wire
antenna (aerial) supplied
with this receiver.
antenna (aerial) supplied
with this receiver.
AM
ANTENNA
jack
ANTENNA
jack
Connects to the AM loop
antenna (aerial) supplied
with this receiver.
antenna (aerial) supplied
with this receiver.
C
COMPONENT VIDEO INPUT/
OUTPUT section
OUTPUT section
COMPONENT
VIDEO (Y, P
VIDEO (Y, P
B
/
C
B
, P
R
/C
R
)
INPUT/
OUTPUT
jacks*
OUTPUT
jacks*
Connects to a DVD
player, TV, or a
satellite tuner.
player, TV, or a
satellite tuner.
D
AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a MD deck
or tape deck, etc.
or tape deck, etc.
MULTI
CHANNEL
INPUT jacks
CHANNEL
INPUT jacks
Connects to a Super Audio
CD player or DVD player
with an analog audio jack
for 7.1 channel or 5.1
channel sound.
CD player or DVD player
with an analog audio jack
for 7.1 channel or 5.1
channel sound.
PRE OUT jacks Connects to an external
power amplifier.
L
R
* You can watch the selected input image when you
connect the MONITOR OUT jack to a TV.
You can also display certain menu settings and the sound
field on the monitor when you press ON SCREEN on
the remote.
You can also display certain menu settings and the sound
field on the monitor when you press ON SCREEN on
the remote.
E
VIDEO/AUDIO INPUT/OUTPUT
section
section
AUDIO IN/
OUT jack
OUT jack
Connects to a VCR or a
DVD player etc.
DVD player etc.
VIDEO IN/
OUT jack*
OUT jack*
S VIDEO IN/
OUT jack*
OUT jack*
F
SPEAKERS section
Connects to speakers.
L
R
11
STR-DA1200ES
You can use the supplied remote RM-AAP015
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate.
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate.
RM-AAP015
Remote commander
Name
Function
A
AV
?
/
1
(on/standby)
Press to turn on or off the audio/
video components that the
remote is assigned to operate.
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
video components that the
remote is assigned to operate.
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
switch changes automatically
each time you press the input
button (C).
B ?
/
1
(on/standby)
Press to turn the receiver on or
off.
off.
C
Input
buttons
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can program
the remote to control non-Sony
components following the steps
in “Programming the remote”.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can program
the remote to control non-Sony
components following the steps
in “Programming the remote”.
E
NIGHT
MODE
MODE
Press to activate the NIGHT
MODE function.
MODE function.
F
INPUT
MODE
MODE
Press to select the input mode
when the same components are
connected to both digital and
analog jacks.
when the same components are
connected to both digital and
analog jacks.
G
2CH
Press to select a sound field.
A.F.D.
MOVIE
MUSIC
H
Numeric
buttons
buttons
Press to
− preset/tune to preset stations.
− select track numbers of the
CD player, DVD player or
MD deck. Press 0/10 to
select track number 10.
MD deck. Press 0/10 to
select track number 10.
− select channel numbers of
the VCR or satellite tuner.
− After pressing TV (wj),
press the numeric buttons to
select the TV channels.
select the TV channels.
I
ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons.
selecting a channel, disc or
track using the numeric buttons.
MEMORY
Press to store a tuner station
during tuner operation.
during tuner operation.
J
DISPLAY
Press to select information
displayed on the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, or MD deck.
displayed on the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, or MD deck.
K
After pressing MENU (qd) or
TOP MENU (qk), press V/v, B
or b to select the settings. Then
press
TOP MENU (qk), press V/v, B
or b to select the settings. Then
press
to enter the selection.
L
TOOLS
Press to display and select items
from the option menus for DVD
player, etc.
from the option menus for DVD
player, etc.
OPTIONS
M
MENU
Press to display the menu of the
receiver, a DVD player or TV,
etc.
receiver, a DVD player or TV,
etc.
N
REPLAY
B
·/
ADVANCE
·
·
b
Press to replay the previous
scene or fast forward the current
scene of the VCR or DVD
player.
scene or fast forward the current
scene of the VCR or DVD
player.
O m
/
M
a)
x
a)
X
a)
H
b)
.
/
>
a)
Press to operate the DVD
player, CD player, MD deck or
tape deck, etc.
player, CD player, MD deck or
tape deck, etc.
TUNING +/–
Press to select stations.
P
PRESET
+
+
b)
/–
Press to register FM/AM Radio
stations or to select preset
stations.
stations or to select preset
stations.
TV CH +/–
Press TV (wj) and then press
TV CH+/– to operate the TV,
satellite tuner, VCR, etc.
TV CH+/– to operate the TV,
satellite tuner, VCR, etc.
Name
Function
Name
Function
V/v/B/b
Q
F1/F2
Press TV (wj) and then press
F1 or F2 to select a component
to operate.
F1 or F2 to select a component
to operate.
• Hard disk recorder
F1: HDD
F2: DVD
F2: DVD
• DVD/VHS combo player
F1: DVD
F2: VHS
F2: VHS
TV/VIDEO
Press TV/VIDEO and TV (wj)
at the same time to select the
input signal (TV input or video
input).
at the same time to select the
input signal (TV input or video
input).
WIDE
Press to select the wide picture
mode.
mode.
R
TOP MENU
Press to display the menu or
on-screen guide of the DVD
player on the TV screen. Then
use V/v/B/b and
on-screen guide of the DVD
player on the TV screen. Then
use V/v/B/b and
to
perform
menu operations.
MENU
Press to display the menus of
the DVD player on the TV
screen. Then use V/v/B/b and
the DVD player on the TV
screen. Then use V/v/B/b and
to perform menu operations.
S
MUTING
Press to activate the muting
function.
function.
T
MASTER
VOL +/–
VOL +/–
Press to adjust the volume level
of all speakers at the same time.
of all speakers at the same time.
TV VOL +/–
Press TV (wj) and then press
TV VOL +/
TV VOL +/
− to adjust the
volume level of the TV.
U
DISC SKIP
Press to skip a disc when using
a multi-disc changer.
a multi-disc changer.
V
RETURN/
EXIT
EXIT
O
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
W
ON SCREEN
Press to display the receiver
status. Then, if you press
MENU (qd), the menus of the
receiver appear.
status. Then, if you press
MENU (qd), the menus of the
receiver appear.
D
RECEIVER
Press to enable the receiver
operation.
operation.
a)
See the table on page 93 for information on the
buttons that you can use to control each
component.
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
PRESET+). Use as a mark of operation.
Notes
•Some functions explained in this section may not
work depending on the model.
•The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
X
CLEAR
Press to
− clear a mistake when you
press the incorrect numeric
button.
button.
− return to continuous
playback, etc. of the satellite
tuner or DVD player.
tuner or DVD player.
>10
Press to select
− track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
player or MD deck.
− channel numbers of the
Digital CATV terminal.
D.TUNING
Press to enter direct tuning
mode.
mode.
Y
A.DIRECT
Press to switch the audio of the
selected input to analog signal
without any adjustment.
selected input to analog signal
without any adjustment.
Z
SLEEP
Press to activate the Sleep
Timer function and the duration
which the receiver turns off
automatically.
Timer function and the duration
which the receiver turns off
automatically.
wj
TV
Press to enable TV operation.
wk
RM SET UP
Press to set up the remote.
STR-DA1200ES
12
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note 1: The process described in
can be performed in any order.
Note 2: Without completing the process described in
, the next process can not be performed.
SECTION 3
DISASSEMBLY
3-2. CASE
(Page 13)
3-4. S-VIDEO
BOARD
(Page 14)
(Page 14)
3-3. FRONT PANEL
ASSY
(Page 13)
(Page 13)
3-7. VIDEO BOARD
(Page 15)
3-5. TUNER
(Page 14)
3-10. POWER
TRANSFORMER (T01)
(Page 17)
(Page 17)
3-6. E-VOLUME
BOARD
(Page 15)
(Page 15)
SET
3-9. ANALOG BOARD
(Page 16)
3-11. MAIN BOARD
(Page 17)
3-8. SPK TERMINAL
BOARD
(Page 16)
(Page 16)
Click on the first or last page to see other STR-DA1200ES service manuals if exist.