Sony SS-HA1 Service Manual ▷ View online
SS-HA1
5
1-5. LOUDSPEAKER (19 mm) (SP2)
– Rear view –
:ire VeWWiQJ
[gray]
[black]
loudspeaker
(19 mm)
(SP2)
(19 mm)
(SP2)
[gray]
(+) side
[black]
2 Remove the loudspeaker (SP2) block
in the direction of the arrow.
8 loudspeaker (19 mm) (SP2)
3 screw (3.5)
3 screw (3.5)
4
holder
(TW
ALG)
1 two screws
(3.5)
7
terminal
(narrow
side)
[black]
7
terminal
(wide
side)
[gray]
5 cushion (STW)
Note
1: Cushion (STW) is not reused.
Be sure to exchange it for new parts.
5 cushion (STW)
Note
1: Cushion (STW) is not reused.
Be sure to exchange it for new parts.
6 two insulation tapes
Note
2: Cut off and use a piece of commercially-available
insulation tape of the size below (be sure to use tape
that provides insulation).
40 mm × 12 mm
6 two insulation tapes
Note
2: Cut off and use a piece of commercially-available
insulation tape of the size below (be sure to use tape
that provides insulation).
40 mm × 12 mm
Ver. 1.1
SS-HA1
6
1-6. LOUDSPEAKER (19 mm) (SP3)
2 Remove the loudspeaker
(19 mm) (SP3) in the direction
of the arrow.
6 loudspeaker (19 mm)
(SP3)
1 screw
(3.5)
1 screw (3.5)
5
terminal
(narrow
side)
[black]
5
terminal
(wide
side)
[blue]
– Rear view –
:ire VeWWiQJ
(+) side
loudspeaker
(19 mm)
(SP3)
(19 mm)
(SP3)
[blue]
[black]
[gray]
[black]
3 cushion (STW)
Note
1: Cushion (STW) is not reused.
Be sure to exchange it for new parts.
3 cushion (STW)
Note
1: Cushion (STW) is
not
reused.
Be sure to exchange
it for new parts.
4 two insulation tapes
Note
2: Cut off and use a piece of commercially-available
insulation tape of the size below (be sure to use tape
that provides insulation).
40 mm × 12 mm
4 two insulation tapes
Note
2: Cut off and use a piece of commercially-available
insulation tape of the size below (be sure to use tape
that provides insulation).
40 mm × 12 mm
Ver. 1.1
SS-HA1
7
1-7. LOUDSPEAKER (25 mm) (SP4)
5 loudspeaker (25 mm)
(SP4)
1 screw (3.5)
1 screw (3.5)
3
cushion
– Rear view –
4
terminal
(wide
side)
[yellow]
4
terminal
(narrow
side)
[black]
2 Remove the loudspeaker (25 mm) (SP4)
in the direction of the arrow.
cushion
wide side
narrow side
:LUHVHWWLQJ
loudspeaker
(25 mm)
(SP4)
(25 mm)
(SP4)
SS-HA1
8
1-8. LOUDSPEAKER (13 cm) (SP1)
4 loudspeaker (13 cm)
(SP1)
1 four screws
(3.5)
3
terminal
(wide
side)
[brown]
3
terminal
(narrow
side)
[black]
2 Remove the loudspeaker (13 cm) (SP1)
in the direction of the arrow.
– Front view –
loudspeaker (13 cm)
(SP1)
(SP1)
terminals position
Note: When installing the loudspeaker (13 cm) (SP1),
make the position of terminals as shown in the
figure
below.
:ire VettinJ
Click on the first or last page to see other SS-HA1 service manuals if exist.