Sony SRS-BTV25 Service Manual ▷ View online
SRS-BTV25
9
2-6. PILLAR BAFFLE BLOCK
4 Peel off from the
adheshive
escutcheon
in two places.
4 Peel off from the adheshive
escutcheon in two places.
5 escutcheon
ditch
rib
6 three screws
(P2.6
u 8)
1 connector
(CN101)
1 CN402
2 CN401
2 connector
(CN401)
3 connector
(CN402)
key wire (lower) cushion
top (rib) cushion
:LUHVHWWLQJ
:LUHVHWWLQJ
:LUHVHWWLQJ
(;&(37.RUHDQ
.RUHDQ
7 pillar baffle block
Note 1: When installing the pillar baffle block,
mutch the position of the rib to the ditch.
Note 3: When installing the connector, please attach in order of the following.
CN402
CN401
%RQGIL[DWLRQ
Part No.
Part No.
Description
7-600-000-48 ADHESIVE AGENT
(SC608LVZ2) 180 ml
Note 4: Please apply a bond so that board,
connector and wire are reinforced.
Note 2: Connectors (CN401 and CN402) cannot be removed.
Please move on to 2-14.
Ver. 1.3
SRS-BTV25
10
2-7. BAFFLE BLOCK
1 two screws
(P2.6
u 10)
1 two screws
(P2.6
u 10)
button (front)
“FRONT” mark
2 baffle block
Note
1: When installing the baffle block,
set the “FRONT” mark in the
direction of the button (front).
rib
baffle (rib) cushion
baffle cushion
screw hole
rear side
Note 2: Do not overflow into
the upper surface.
Note 2: Do not overflow into
the upper surface.
3DVWLQJSRVLWLRQRIFXVKLRQV
0.5 to 2 mm
edge
±6LGHYLHZ±
baffle cushion
Note 3: Paste the baffle cushion to
cover a root of bosses.
1 to 2 mm
SRS-BTV25
11
2-8. LOUDSPEAKER (5.6 cm) (WOOFER) (SP1)
Note 1: When replacing LOUDSPEAKER (5.6 cm) (WOOFER) (SP1), please also exchange MAIN board and LOUDSPEAKER (20 mm) (TWEETER)
(SP2) simultaneously. (Korean model only)
1 two screws
(BVTP3
u 8)
1 two screws
(BVTP3
u 8)
3 Remove the solder.
5 loudspeaker (5.6 cm)
(woofer)
(SP1)
4 woofer connector wire
3 Remove the solder.
– Bottom view –
2
woofer wire (upper) cushion
woofer wire (upper) cushion
black
Terminal color is white.
Terminal color is red.
red
woofer wire (upper) cushion
rear side
front side
5 mm or less
– Bottom view –
/oXGVSeDNeU Fm 63 VettiQJ
.oUeDQ
.oUeDQ
Note 3: Please involve in the both ends of clamp.
Note 2: This connector cannot be removed.
< step 1 >
< step 2 >
< step 3 >
NG
2.
clamp filter
(ferrite core)
(ferrite core)
tweeter wire
(lower) cushion
(lower) cushion
Ver. 1.3
SRS-BTV25
12
2-9. PANEL TOP BLOCK
1 two screws
(P2.6
u 8)
longer side
red wire
pillar block
2 panel top block
panel top block
red wire
rear side
front side
front side
rear side
:LUHVHWWLQJ
.RUHDQ
Note: This connector
cannot be removed.
(;&(37.RUHDQ
longer side
red wire
pillar block
rear side
front side
.RUHDQ
Ver. 1.3
Click on the first or last page to see other SRS-BTV25 service manuals if exist.