Sony SCD-XA9000ES Service Manual ▷ View online
9
SCD-XA9000ES
NOTE ON POSITION OF WIRE (FLAT TYPE)
MAIN board
wire (flat type)
heatsink
A-POWER board
Heatsink gets heated up to a high temperature.
Be careful to keep the position of wire (flat type).
Be careful to keep the position of wire (flat type).
B
FRONT
10
SCD-XA9000ES
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
6
A
OPEN/CLOSE button
Press to open or close the disc tray.
7
N
button
Press to start play.
N
indicator
Lights up during playback.
8
X
button
Press to pause play.
X
indicator
Lights up during pause.
9
x
button
Press to stop play.
0
PHONES
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.
qa
PHONE LEVEL
Adjust the headphones volume.
Adjust the headphones volume.
qs
MENU
Press to enter the menu.
Press to exit from the menu and return to the normal
display.
Press to enter the menu.
Press to exit from the menu and return to the normal
display.
qd
MULTI/2CH button
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded.
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded.
qf
Remote sensor
qg
Display window
Shows various information.
Shows various information.
qh
.
AMS > dial (AMS: Automatic Music Sensor)
When you turn the . AMS > dial
counterclockwise by one click, you go back to the
preceding track; when you turn the . AMS >
dial clockwise by one click, you go to the succeeding
track.
counterclockwise by one click, you go back to the
preceding track; when you turn the . AMS >
dial clockwise by one click, you go to the succeeding
track.
PHONES
PHONE LEVEL
MIN
MAX
PUSH
ENTER
AMS
TIME/TEXT
SACD/CD
MENU
MULTI/2CH
POWER
i.LINK
1
POWER switch
Press to turn on the player.
Press to turn on the player.
2
TIME/TEXT button
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
3
SACD/CD button
Each time you press the button while playing back a
hybrid disc, the layer to be played back switches
between the HD (Super Audio CD) layer and the CD
layer.
Each time you press the button while playing back a
hybrid disc, the layer to be played back switches
between the HD (Super Audio CD) layer and the CD
layer.
4
i.LINK button
Each time you press the button, i.LINK function turns
on or off.
Each time you press the button, i.LINK function turns
on or off.
i.LINK indicator
Lights up when the i.LINK function is used.
Lights up when the i.LINK function is used.
5
Disc tray
Press A OPEN/CLOSE to open/close the disc tray.
Press A OPEN/CLOSE to open/close the disc tray.
Front Panel Parts Descriptions
11
SCD-XA9000ES
Rear Panel Parts Descriptions
1
ANALOG 5.1CH OUT jacks
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
2
DIGITAL (CD) OUT COAXIAL connector
Connect to an audio component using the coaxial
digital cable.
Connect to an audio component using the coaxial
digital cable.
3
DIGITAL (CD) OUT OPTICAL connector
Connect to an audio component using an optical
digital cable.
Connect to an audio component using an optical
digital cable.
4
i.LINK S200 AUDIO OUT jack
Connect to STR-DA9000ES/TA-DA9000ES using the
i.LINK connecting cord.
Connect to STR-DA9000ES/TA-DA9000ES using the
i.LINK connecting cord.
5
AC IN terminal
Connect the AC power cord.
Connect the AC power cord.
6
ANALOG 2CH OUT L/R jacks
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT
connectors.
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT
connectors.
When the i.LINK indicator is lit
No signal is output from all the other jacks (ANALOG 2CH OUT
jacks, ANALOG 5.1CH OUT jacks, PHONES jack, DIGITAL (CD)
OUT jacks).
jacks, ANALOG 5.1CH OUT jacks, PHONES jack, DIGITAL (CD)
OUT jacks).
ANALOG
L
L
R
R
R
L
5.1CH OUT
2CH OUT
OUT
OPTICAL
COAXIAL
CENTER
FRONT
SURROUND
SUB WOOFER
DIGITAL(CD)
AC IN
AUDIO OUT
i.LINK S200
12
SCD-XA9000ES
Remote Parts Descriptions
CONTINUE SHUFFLE
PLAY MODE
PROGRAM
SACD/CD
1
2
3
4
5
6
7
8
10/0
9
TIME/TEXT
REPEAT
AMS
B
A
CLEAR
>10
ENTER
MODE
DISPLAY/
MULTI/2CH
INDEX
LEVEL
ADJ
CHECK
1
CONTINUE button
Press to resume normal play from Shuffle Play or
Program Play.
Press to resume normal play from Shuffle Play or
Program Play.
SHUFFLE button
Press to select Shuffle Play.
Press to select Shuffle Play.
PROGRAM button
Press to select Program Play.
Press to select Program Play.
2
DISPLAY MODE button
Press to turn the display information off or on.
Press to turn the display information off or on.
3
TIME/TEXT button
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
4
Number buttons
Press to enter the track numbers.
Press to enter the track numbers.
5
i
10 button
Press to locate a track numbered over 10.
6
REPEAT button
Press repeatedly to play all tracks or only one track on
the disc.
Press repeatedly to play all tracks or only one track on
the disc.
7
AyB button
Press to select Repeat A-B Play.
Press to select Repeat A-B Play.
8
H
button
Press to start play.
X
button
Press to pause play.
x
button
Press to stop play.
9
AMS ./> (AMS: Automatic Music Sensor)
buttons
Press to locate a specific track.
buttons
Press to locate a specific track.
0
m
/M buttons
Press to locate a portion you want to play within a
track.
track.
qa
INDEX >/. buttons
Press to locate a specific point marked with an index
signal when you play a disc that has index signals.
Press to locate a specific point marked with an index
signal when you play a disc that has index signals.
qs
SACD/CD button
Each time you press the button, ”SACD“ or ”CD“
appears in the display. Select the type of CD you want
to play.
Each time you press the button, ”SACD“ or ”CD“
appears in the display. Select the type of CD you want
to play.
qd
MULTI/2CH button
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded.
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded.
qf
ENTER button
Press to decide the selection.
Press to decide the selection.
qg
CLEAR button
Press to delete a programed track number.
Press to delete a programed track number.
qh
LEVEL ADJ button
Press to adjust the output level balance for the Multi-
channel management function.
Press to adjust the output level balance for the Multi-
channel management function.
qj
CHECK button
Press to check the programed order.
Press to check the programed order.
Click on the first or last page to see other SCD-XA9000ES service manuals if exist.