DOWNLOAD Sony SAVA-D900 / SAVA-D900FR / SAVA-D900R / SS-T900 Service Manual ↓ Size: 32.06 MB | Pages: 99 in PDF or view online for FREE

13

1

 Slide the slider (u/d)

     fully in the arrow 
     direction.

3

 Gear (gear B)

2

 Gear (U/D slider)

4

 Gear (gear A)

Portion A

Adjust the gear (gear B) with the 
portion A as shown.

Slider (U/D) gear

Adjust the gear so that it meshes with
the bottom tooth of slider (U/D) gear,
as shown.

Gear
(gear B)

Linearly

Adjust so as to be aligned with
gear B linearly, as shown.

2

 Gear (chuking)

6

 Two screws 

     (PTPWH M2.6)

5

 Washer

3

 Convex portion of

     slider (selection)

4

 Compression spring

7

 Insert the slider (selection)

    into the portion A.

1

 Rotary encoder

Rotary encoder

Align with the slot of
rotary encoder.

Align marking

Portion A

Gear (chuking)

Insert a convex portion into
a groove of gear (chuking).

14

2

 Portion A of tray (sub)

1

 Stocker section

3

 Two step screws

4

 Two step screws

Hook the portion A of tray (sub)
to the slider (selection).

Portion A
of tray (sub)

Sticking of 
slider (selection)

3

 Three screws 

     (BVTP M2.6)

2

 Insert the gear (eject0

     under the gear (LD 
     deceleration).

1

 Insert the portion A of

    chassis (mold B) section
    into the portion B of 
    slider (selection).

Gear (LD deceleration)

Portion A

Portion B of
slider (selection)

15

Blue display (test mode)

DVD microprocessor downloading mode

All cliar of STR side

Key Check

Display Check

Speaker Check

—

—

—

SAVA-D900’s key

STOP

STOP

SWMODE

SWMODE

SWMODE

SWMODE

SWMODE

SWMODE

BAND

STOP

STOP

STOP

BAND

STOP

DISC 1

DISC 2

DISC 3

EJECT 3

EJECT 5

EJECT 4

* The speaker check mode is the test mode in which the sound signel that is input to the TV INPUT is output

from all speakers at the unity sound level.

• Selcting 9K or 10K of AM

Select the AM band. Turn off the main power. While pressing the SUB WOOFFER MODE button, press the ?/1
(power) switch to turn on the main power.

16

The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).

Set the FUNCTION to DVD with the main unit power on. Next,
while pushing the [STOP] button and the [MUTING] button on the
main unit at the same time, turn the regulator to the right to start
Test Mode and display the menu shown below on the TV screen. At
the bottom of the menu screen, the model name and revision number
are displayed.
To execute each function, select the desired menu and press its
number on the remote commander. To exit from Test Mode, press
the [POWER] button.

Test Mode Menu

0. Syscon Diagnosis

1. Drive Auto Adjustment

2. Drive Manual Operation

3. Mecha Aging

4. Emergency History

5. Version Information

6. Video Level Adjustment

Exit: Power Key

_

Model

: HCX932xxxx

Revision : 1.xxx

The same contents as board detail check by serial interface can be
checked from the remote commander.
On the Test Mode Menu screen, press 

[0]

 key on the remote

commander, and the following check menu will be displayed.

### Syscon Diagnosis ###

Check Menu

0. Quit

1. All

2. Version

3. Peripheral

4. Servo

5. Supply

6. AV Decoder

7. Video

8. Audio

_

Quit the Syscon Diagnosis and return to the Test Mode Menu.

All items continuous check
This menu checks all diagnostic items continuously. Normally, all
items are checked successively one after another automatically
unless an error is found, but at a certain item that requires judgment
through a visual check to the result, the following screen is displayed
for the key entry.

### Syscon Diagnosis ###

Diag All Check

No. 2 Version

 2-3. ROM Check Sum

Check Sum = 2005

Press NEXT Key to Continue

Press PREV Key to Repeat

_

For the ROM Check, the check sum calculated by the Syscon is
output, and therefore you must compare it with the specified value
for confirmation.
Following the message, press 

[NEXT]

 key to go to the next item, or

[PREV]

 key to repeat the same check again. To quit the diagnosis

and return to the Check Menu screen, press 

[STOP]

 or

[ENTER]

 key. If an error occurred, the diagnosis is suspended and

the error code is displayed as shown below.

### Syscon Diagnosis ###

 3-3. EEPROM Check

Error 03: EEPROM Write/Reed N

Address

: 00000001

Write Data : 2492

Read Data

: 2490

Press NEXT Key to Continue

Press PREV Key to Repeat

_

Press 

[STOP]

 key to quit the diagnosis, or 

[PREV]

 key to repeat

the same item where an error occurred, or 

[NEXT]

 key to continue

the check from the item next to faulty item.

Selecting 2 and subsequent items calls the submenu screen of each
item.
For example, if “5. Supply” is selected, the following submenu will
be displayed.

### Syscon Diagnosis ###

Check Menu

No. 5 Supply

0. Quit

1. All

2. ARP Register Check

3. ARP to RAM Data Bus

4. ARP to RAM Address Bus

5. ARP RAM Check

_

Quit the submenu and return to the main menu.

All submenu items continuous check
This menu checks 2 and subsequent items successively. At the item
where visual check is required for judgment or an error occurred,
the checking is suspended and the message is output for key entry.
Normally, all items are checked successively one after another
automatically unless an error is found.