Sony SA-NS510 Service Manual ▷ View online
SA-NS510
5
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
SET
2-6. SHIELD
(BOTTOM)
(Page
8)
2-8. MAIN
BOARD
(Page
9)
2-9. BASE (SATELLITE) BLOCK
(Page
(Page
10)
2-11. ANTENNA (ANT1)
(Page
(Page
12)
2-10. FRAME (GRILLE) ASSY
(Page
(Page
11)
2-12. LOUDSPEAKER (3 cm)
(TWEETER)
(Page
(TWEETER)
(Page
13)
2-13. LOUDSPEAKER (11 cm)
(WOOFER)
(WOOFER)
(SP5)
(Page
13)
2-7. WIRELESS LAN MODULE
(MOD1)
(Page
(MOD1)
(Page
9)
2-2. PANEL (TOP) BLOCK
(Page
(Page
6)
2-3. DRAPE
BLOCK
(Page
6)
2-4. LITHIUM ION SECONDARY
BATTERY
BATTERY
BLOCK
(Page
7)
2-5. COVER (BOTTOM) BLOCK
(Page
(Page
8)
Ver. 1.1
SA-NS510
6
Note: Follow the disassembly procedure in the numerical order given.
2-2. PANEL (TOP) BLOCK
2-3. DRAPE BLOCK
3 two screws
(3.5)
1 five claws
4 claw
5 Lift up the panel (top) block.
7 panel (top) block
6 flexible flat cable (21 core)
(CN900)
2 cover (top)
1 four screws
(3.5)
2 drape block
Note: When installing the drape block, arrange in the right
position not to bite flexible flat cable (21 core).
flexible flat cable (21 core) is arranged correctly.
flexible flat cable (21 core)
claw
claw
flexible flat cable (21 core)
NG
OK
SA-NS510
7
2-4. LITHIUM ION SECONDARY BATTERY BLOCK
2
cavity cushion (upper)
4
battery
connector
3
cushion
(connector)
5
two screws
(3.5)
6
lid (battery) block
7
lithium ion secondary
battery
block
1
cavity cushion (lower)
Match the flexible flat cable (21 core)
with the right end of a slot.
with the right end of a slot.
Put the flexible flat cable (21 core)
inside a slot and match the FFC
cushion with the upper side of the
cavity.
inside a slot and match the FFC
cushion with the upper side of the
cavity.
Match with the rib and the lower
side of the cavity and paste the
cavity cushion (lower).
side of the cavity and paste the
cavity cushion (lower).
Match with the left of a screw hole
and the upper side of the cavity and
paste the cavity cushion (upper).
and the upper side of the cavity and
paste the cavity cushion (upper).
Do not exceed guide lines.
Do not exceed guide line.
battery wire
wire
lid (battery)
cushion (connector)
guide line
guide line
:LUHVHWWLQJ
)OH[LEOHIODWFDEOHFRUHVHWWLQJ
OK
NG
)OH[LEOHIODWFDEOHFRUHVHWWLQJ
battery cushion (wire)
Wire is straight.
Wire is twisted.
:LUHVHWWLQJ
NG
OK
NG
OK
SA-NS510
8
2-6. SHIELD
(BOTTOM)
2-5. COVER (BOTTOM) BLOCK
1
two foots
1
two foots
3 cover (bottom) block
S107
S100
2 two screws
(BVTP3.5
u 20)
2 two screws
(BVTP3.5
u 20)
– Bottom view –
knobs (slide)
MAIN board
switch
NG
OK
Note 1: When installing cover (bottom) block,
match the position of two knobs (slide)
and two switches (S100, S107).
Note 2: Check that the knobs
(slide) are installed
correctly.
2 five screws
(BVTP3
u 8)
1 flexible flat cable (21 core)
(CN101)
2 six screws
(BVTP3
u 8)
– Bottom view –
3 shield (bottom)
coloured line
coloured line
Insert is straight to the interior.
Insert is incline
flexible flat
cable
cable
flexible flat
cable
cable
connector
connector
OK
NG
Note: When installing the flexible flat cable, ensure the coloured line.
No slanting after insertion.
Click on the first or last page to see other SA-NS510 service manuals if exist.