Sony SA-NS510 Service Manual ▷ View online
SA-NS510
29
Pin No.
Pin Name
I/O
Description
61
LED_LINK (GRN)
O
LED drive signal output terminal for LINK indicator (green color) “L”: LED on
62
Vcc2
-
Power supply terminal (+3.3V)
63
LED_AUDIO_IN
O
LED drive signal output terminal for AUDIO IN indicator (green color) “L”: LED on
64
Vss
-
Ground terminal
65
BCO_XAMP_MUTE
I
Amplifi er muting on/off control signal input from the wireless LAN module “L”: muting on
66
KEY_ALL_RESET
I
ALL RESET key input terminal
67
KEY_STBY_MODE
I
STANDBY MODE switch input terminal “L”: STANDBY, “H”: NETWORK STANDBY
68
POWER_SW_DET
I
OPERATE switch input terminal “L”: OFF, “H”: ON
69, 70
NO USE
O
Not used
71
BAT_CHARGING
I
Charging status signal input from the power/charge controller “L”: charging
72
BAT_FULL_CHG
I
Full charge status signal input from the power/charge controller “L”: full charge
73
PVDD_DET
I
PVDD power supply detection signal input terminal
74
KEY_POWER
I
Power key input terminal
75
AC_CUT
I
AC cut detection signal input terminal
76
POWER_SUPPLY_STT
I
Power supply status signal input from the power/charge controller “L”: AC, “H”: battery
77
DBUG_TDX
O
Serial data output terminal for debug
78
DBUG_RDX
I
Serial data input terminal for debug
79
BAT_CHG_EN
O
Charge enable signal output to the power/charge controller “H”: charge
80
CHG_SPD
O
Charge speed control signal output terminal “L”: slow, “H”: standard
81
BAT_LEVEL_EN
O
Battery voltage detection control signal output terminal
82
BAT_TEMP_EN
O
Battery temperature detection control signal output terminal Not used
83
VSYS_LEVEL_EN
O
System voltage detection control signal output terminal
84
AUDIO_DET
I
Audio detection signal input terminal
85
WIFI_MAX_CH_SEL
I
Wi-Fi destination setting signal input terminal
“L”: 1–13 ch (AEP, UK and Australian models), “H”: 1–11 ch (US and Canadian models)
“L”: 1–13 ch (AEP, UK and Australian models), “H”: 1–11 ch (US and Canadian models)
86
BAT_LEVEL_DET
I
Battery voltage detection signal input terminal
87
BAT_TEMP_DET
I
Battery temperature detection signal input terminal
88
VSYS_LEVEL_DET
I
System voltage detection signal input terminal
89
NO USE
O
Not used
90
KEY_PARTY
I
Party streaming function key input terminal
91
KEY_INPUT
I
INPUT key input terminal
92
KEY_VOL+
I
VOLUME + key input terminal
93
KEY_VOL−
I
VOLUME − key input terminal
94
KEY_WPS
I
WPS key input terminal
95
INT_ENABLE
O
Interrupt enable signal output terminal for low battery status
96
Avss
-
Ground terminal
97
DEST
I
Destination setting signal input terminal Fixed at “L” in this unit
98
VREF
I
Reference voltage (+3.3V) input terminal
99
Avcc
-
Power supply terminal (+3.3V)
100
KEY_UPDATE
I
UPDATE key input terminal
SA-NS510
30
MAIN BOARD IC109 TAS5602DCAR (DIGITAL POWER AMPLIFIER)
Pin No.
Pin Name
I/O
Description
1 to 3
PGNDA
-
Ground terminal
4 to 6
PVCCA
-
Power supply terminal (+18V)
7
NC
-
Not used
8
DVDD
-
Power supply terminal (+3.3V)
9
DGND
-
Ground terminal
10
PWM_AP
I
Audio signal input from the digital power amplifi er
11
NC
-
Not used
12
PWM_BP
I
Audio signal input from the digital power amplifi er
13
NC
-
Not used
14
PWM_CP
I
Audio signal input from the digital power amplifi er
15
NC
-
Not used
16
PWM_DP
I
Audio signal input from the digital power amplifi er
17
HIZ
I
Power down signal input from the system controller “L”: power down
18
RESET
I
Reset signal input from the digital power amplifi er “L”: reset
19
FAULT
O
Fault signal output to the system controller
20
SE/BTL
I
Not used
21
THERM
O
Thermal warming signal output to the system controller
22
NC
-
Not used
23 to 25
PVCCD
-
Power supply terminal (+18V)
26 to 28
PGNDD
-
Ground terminal
29, 30
OUTD
O
Audio signal output terminal
31 to 33
PGNDC
-
Ground terminal
34, 35
OUTC
O
Audio signal output terminal
36, 37
PVCCC
-
Power supply terminal (+18V)
38
BSC
I/O
Bootstrap input/output terminal
39
VCLA_CD
-
External capacitor connection terminal
40
BSD
I/O
Bootstrap input/output terminal
41
BYPASS
O
Reference voltage output terminal
42
AGND
-
Ground terminal
43
AVCC
-
Power supply terminal (+18V)
44
NC
-
Not used
45
BSA
I/O
Bootstrap input/output terminal
46
VCLA_AB
-
External capacitor connection terminal
47
BSB
I/O
Bootstrap input/output terminal
48, 49
PVCCB
-
Power supply terminal (+18V)
50, 51
OUTB
O
Audio signal output terminal Not used
52 to 54
PGNDB
-
Ground terminal
55, 56
OUTA
O
Audio signal output terminal Not used
SA-NS510
31
MAIN BOARD IC601 BQ24610RGER (POWER/CHARGE CONTROLLER)
Pin No.
Pin Name
I/O
Description
1
ACN
I
Adaptor current sense resistor (−) connection terminal
2
ACP
I
Adaptor current sense resistor (+) connection terminal
3
/ACDRV
O
AC adaptor power supply on/off control signal output terminal “L”: power on
4
CE
I
Charge enable signal input from the system controller “H”: charge
5
STAT1
O
Charging status signal output to the system controller “L”: charging
6
TS
I
Temperature condition voltage input terminal for battery
7
TTC
I
Safety timer setting and charge end control terminal
8
/PG
O
Power supply status signal output to the system controller “L”: AC, “H”: battery
9
STAT2
O
Full charge status signal output to the system controller “L”: full charge
10
VREF
O
Reference voltage (+3.3V) output terminal
11
ISET1
I
Charge speed control signal input terminal “L”: standard, “H”: slow
12
VFB
I
Charge voltage setting terminal
13
SRN
I
Charge current sense resistor (−) connection terminal
14
SRP
I
Charge current sense resistor (+) connection terminal
15
ISET2
I
Pre-charge current and charge end current setting terminal
16
ACSET
I
Adaptor current setting terminal
17
AGND
-
Ground terminal
18
REGN
O
+6V power supply output terminal
19
LODRV
O
Charge control signal output terminal
20
PH
I
Minus power supply input terminal
21
HIDRV
O
Charge control signal output terminal
22
BTST
I
Bootstrap voltage input terminal
23
/BATDRV
O
Battery power supply on/off control signal output terminal “L”: power on
24
VCC
-
Power supply terminal (+18V)
32
SA-NS510
SECTION 5
EXPLODED VIEWS
1
4-294-981-03 COVER
(TOP)
2
4-986-971-02 SCREW
(3.5)
3
X-2582-526-1 PANEL
ASSY
(TOP)
4
A-1883-719-A PANEL BOARD, COMPLETE
#1
7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
• Abbreviation
AUS :
AUS :
Australian
model
CND : Canadian model
5-1. PANEL (TOP) SECTION
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
1
4
3
2
2
cover (bottom) section
#1
Click on the first or last page to see other SA-NS510 service manuals if exist.