Sony SA-NS500 Service Manual ▷ View online
SA-NS500
9
2-9. BASE (SATELLITE) BLOCK
6 base (satellite) block
1 Pull out the base (satellite) block.
3
Draw out the antenna wire.
2
Draw out the flexible
flat cable (21 core).
5
Draw out the loudspeaker (11 cm) wire.
4
Draw out the battery wire.
– Bottom view –
base (satellite)
The wire has not covered
on the screw hole.
on the screw hole.
The wire has covered
on the screw hole.
on the screw hole.
The wire is through the
left side of a hole.
left side of a hole.
The wire is through the
right side of a hole.
right side of a hole.
– Bottom view –
OK
OK
NG
NG
:iUe VettiQJ
front side
SA-NS500
10
2-10. FRAME (GRILLE) ASSY
1 four screws
(3.5)
– Bottom view –
4
Draw out the antenna wire.
3
Draw out the flexible
flat cable (21 core).
6
Draw out the loudspeaker (11 cm) wire.
7
frame (grille) assy
5
Draw out the battery wire.
2
SA-NS500
11
2-11. BASE (SATELLITE) BLOCK
2
cavity cushion (upper)
3
flexible flat cable (21 core)
5
two screws
(3.5)
6
holder (antenna) block
7
lower cushion (antenna)
lower cushion
(antenna)
(antenna)
8
antenna (ANT1)
1
cavity cushion (lower)
4
two upper cushions (antenna)
upper cushion
(antenna)
(antenna)
upper
cushion
(antenna)
cushion
(antenna)
Match the flexible flat cable (21 core)
with the right end of a slot.
with the right end of a slot.
Put the flexible flat cable (21 core)
inside a slot and match the FFC
cushion with the upper side of the
cavity.
inside a slot and match the FFC
cushion with the upper side of the
cavity.
Match with the center of the screw
and the lower side of the cavity and
paste the cavity cushion (lower).
and the lower side of the cavity and
paste the cavity cushion (lower).
Match with the left of a screw hole
and the upper side of the cavity and
paste the cavity cushion (upper).
and the upper side of the cavity and
paste the cavity cushion (upper).
)OH[LEOHIODWFDEOHFRUHVHWWLQJ
)OH[LEOHIODWFDEOHFRUHVHWWLQJ
$QWHQQDZLUHVHWWLQJ
holder (antenna)
antenna (ANT1)
5 mm
5 mm
–/HIWVLGHYLHZ–
10 mm
SA-NS500
12
2-13. LOUDSPEAKER (11 cm) (WOOFER) (SP5)
2-12. LOUDSPEAKER (3 cm) (TWEETER)
1 three screws
(3.5)
2
5 loudspeaker
(3 cm) (tweeter)
(SP1)
4 cushion
(SAT speaker)
loudspeaker (3 cm)
(tweeter) (SP3)
(tweeter) (SP3)
loudspeaker (3 cm)
(tweeter) (SP2)
(tweeter) (SP2)
loudspeaker (3 cm)
(tweeter) (SP4)
(tweeter) (SP4)
3
two terminals
Note: These loudspeakers
(3 cm) (tweeter)
(SP2, SP3, SP4) can
be similarly removed.
1 red
2 black
4 black
6 brown
8 brown
3 red
5 blue
7 blue
1 red 2 black
SP4
SP2
SP1
SP3
hole
4 black
3 red
6 brown
8 brown
5 blue
7 blue
:LUHVHWWLQJ
1 four screws
(3.5)
2
4 loudspeaker (11 cm) (woofer)
(SP5)
3
two terminals
– Bottom view –
Click on the first or last page to see other SA-NS500 service manuals if exist.