Sony SA-NS500 Service Manual ▷ View online
SA-NS500
5
Note: Follow the disassembly procedure in the numerical order given.
2-2. PANEL (TOP) BLOCK
2-3. DRAPE BLOCK
3 two screws
(3.5)
1 five claws
4 claw
5 Lift up the panel (top) block.
7 panel (top) block
6 flexible flat cable (21 core)
(CN900)
2 cover (top)
1 four screws
(3.5)
2 drape block
SA-NS500
6
2-4. LITHIUM ION SECONDARY BATTERY BLOCK
2
cavity cushion (upper)
4
battery
connector
3
cushion
(connector)
5
two screws
(3.5)
6
lid (battery) block
7
lithium ion secondary
battery
block
1
cavity cushion (lower)
Match the flexible flat cable (21 core)
with the right end of a slot.
with the right end of a slot.
Put the flexible flat cable (21 core)
inside a slot and match the FFC
cushion with the upper side of the
cavity.
inside a slot and match the FFC
cushion with the upper side of the
cavity.
Match with the rib and the lower
side of the cavity and paste the
cavity cushion (lower).
side of the cavity and paste the
cavity cushion (lower).
Match with the left of a screw hole
and the upper side of the cavity and
paste the cavity cushion (upper).
and the upper side of the cavity and
paste the cavity cushion (upper).
battery wire
wire
lid (battery)
cushion (connector)
guide line
guide line
:LUHVHWWLQJ
)OH[LEOHIODWFDEOHFRUHVHWWLQJ
OK
NG
)OH[LEOHIODWFDEOHFRUHVHWWLQJ
battery cushion (wire)
Wire is straight.
Wire is twisted.
:LUHVHWWLQJ
SA-NS500
7
2-6. SHIELD
(BOTTOM)
2-5. COVER (BOTTOM) BLOCK
1
two foots
1
two foots
3 cover (bottom) block
S107
S100
2 two screws
(BVTP3.5
u 20)
2 two screws
(BVTP3.5
u 20)
– Bottom view –
knobs (slide)
MAIN board
switch
Note: When installing cover (bottom) block,
match the position of two knobs (slide)
and two switches (S100, S107).
1 five screws
(BVTP3
u 8)
1 six screws
(BVTP3
u 8)
– Bottom view –
2 shield (bottom)
SA-NS500
8
2-8. MAIN BOARD
2-7. WIRELESS LAN MODULE (11SA-NS500) (MOD1)
1
cupper cushion
(antenna)
2
cushion (satellite)
cushion (satellite)
upper cushion
(antenna)
(antenna)
3
antenna
connector
antenna wire
4 screw
(BVTP3
u 8)
– Bottom view –
wireless LAN module (MOD1)
MAIN board
:iUe VettiQJ
5 connector (CN104)
Note
1: When installing the wireless LAN module, check that there
are no foreign substances, such as dust, in the contacting part.
6 wireless LAN module (11SA-NS500) (MOD1)
Note
2: When replacing the wireless LAN module
(11SA-NS500) (Ref. No. MOD1), refer to
“NOTE OF REPLACING THE WIRELESS
LAN MODULE (11SA-NS500)” and
“PROCESSING OF REPLACING THE
WIRELESS LAN MODULE (11SA-NS500) ”
(page 3).
4
flexible flat cable (21 core)
(CN101)
2
woofer connector
(CN107)
3
tweeter connector
(CN108)
5 four screws
(BVTP3
u 8)
1 battery connector
(CN600)
9 MAIN board
7 shield (top)
8 bridge cushion (A)
6
– Bottom view –
Click on the first or last page to see other SA-NS500 service manuals if exist.