Sony PHA-1A / PHA-1AEU Service Manual ▷ View online
PHA-1A/1AEU
5
2-3. CASE BLOCK, MAIN BOARD BLOCK
1 screw
(M1.4
u 2.5)
4 case block
3 MAIN board block
2 Push the MAIN board block
in the direction of the arrow.
Note: When replacing the case, be sure to replace the MAIN board
simultaneously.
Among the repair parts, the MAIN board and case are supplied
as one unit.
as one unit.
2-4. BATTERY ASSY (BAT1)
3 Lift up the battery assy (BAT1)
in the direction of the arrow.
2 Peel off the battery assy (BAT1)
from the frame sheet.
frame block
4 connector
(CN702)
– Frame block battery installation side –
connector
(CN702)
(CN702)
Push the wire inside
of the frame.
of the frame.
frame
battery assy
(BAT1)
(BAT1)
:ire settinJ
3astinJ Sosition oI battery cXsKion
battery assy
(BAT1)
(BAT1)
battery cushion
guide line
(center)
(center)
5 battery assy (BAT1)
Note
2: When removing the battery assy (BAT1),
the battery assy (BAT1) cannot be reused.
Be sure to replace them with new parts.
1 battery cushion
Note
1: When removing the battery cushion from
the battery assy (BAT1), be sure to replace
the battery assy (BAT1) with new parts.
PHA-1A/1AEU
6
2-5. MAIN BOARD
Note 1: When replacing the MAIN board, be sure to replace the case
simultaneously.
Among the repair parts, the MAIN board and case are sup-
plied as one unit.
4 four screws
(M1.7
u 4.5)
5 Lift up the MAIN board in
the direction of the arrow.
7 connector (CN002)
6 connector (CN001)
hole
boss
boss
hole
3 connector (CN303)
2 woofer sheet
1 frame sheet
8 MAIN board
Note
2: When installing the MAIN board,
align two holes and two bosses.
– Frame block battery installation side –
– Frame block MAIN board installation side –
:LUHVHWWLQJ
connector
(CN002)
(CN002)
connector
(CN303)
(CN303)
MAIN board
HP JACK board
Pass the wire under the MAIN board.
3DVWLQJSRVLWLRQRIIUDPHVKHHW
:LUHVHWWLQJ
woofer sheet
connector
(CN001)
(CN001)
connector
(CN301)
(CN301)
frame sheet
guide line
guide line
PHA-1A/1AEU
7
2-6. PLATE MIDDLE ASSY
2-7. HP JACK BOARD
4 plate middle assy
1 screw
(M1.7
u 4.5)
frame block
1 screw
(M1.7
u 4.5)
1 screw
(M1.7
u 4.5)
2 connector
(CN301)
3 light guide
– Frame block MAIN board installation side –
1 screw
(M1.7
u 4.5)
2 HP JACK board
ditch
boss
– Frame block MAIN board installation side –
frame block
PHA-1A/1AEU
8
MEMO
Click on the first or last page to see other PHA-1A / PHA-1AEU service manuals if exist.