Sony NWZ-S515 / NWZ-S516 / NWZ-S615F / NWZ-S616F / NWZ-S618F Service Manual ▷ View online
NWZ-S515/S516/S615F/S616F/S618F
5
SECTION 2
GENERAL
Parts and Controls
Front
Rear
This section is extracted
from instruction manual.
from instruction manual.
Headphone jack
For connecting the headphones.
Insert the jack pin until it clicks into
place. If the headphones are
connected improperly, the sound
from the headphones may not sound
right.
Insert the jack pin until it clicks into
place. If the headphones are
connected improperly, the sound
from the headphones may not sound
right.
Strap hole
This is used to attach a strap (sold
separately).
separately).
HOLD switch
You can protect the player against
accidental operation by using the
HOLD switch when carrying it. By
sliding the HOLD switch in the
direction of the arrow, all operation
buttons are disabled. If you slide the
HOLD switch to the opposite
position, the HOLD function is
released.
accidental operation by using the
HOLD switch when carrying it. By
sliding the HOLD switch in the
direction of the arrow, all operation
buttons are disabled. If you slide the
HOLD switch to the opposite
position, the HOLD function is
released.
Display
The display may vary, depending on
functions.
functions.
VOL +
*
2
/– button
Adjusts the volume.
OPTION/PWR OFF button
*
1
Displays the option menu.
If you press and hold the OPTION/
PWR OFF button, the screen turns
off and the player enters the standby
mode. If you press any button while
the player is in the standby mode,
the “Now Playing” screen, etc.,
appears and the player is ready for
operation. Furthermore, if you leave
the player in the standby mode for
about a day, the player turns
completely off automatically. If you
press any button when the player is
turned off, the start up screen
appears first, then the “Now Playing”
screen appears.
If you press and hold the OPTION/
PWR OFF button, the screen turns
off and the player enters the standby
mode. If you press any button while
the player is in the standby mode,
the “Now Playing” screen, etc.,
appears and the player is ready for
operation. Furthermore, if you leave
the player in the standby mode for
about a day, the player turns
completely off automatically. If you
press any button when the player is
turned off, the start up screen
appears first, then the “Now Playing”
screen appears.
Note
The player consumes battery power very
slightly even when it is in the standby
mode. Therefore, the player might
turn completely off in a short time,
depending on the power remaining in
the battery.
slightly even when it is in the standby
mode. Therefore, the player might
turn completely off in a short time,
depending on the power remaining in
the battery.
*
1
Functions of marked with
on the
player are activated if you press and hold
the corresponding buttons.
the corresponding buttons.
*
2
There are tactile dots. Use them to help
with button operations.
with button operations.
RESET button
Resets the player when you press the
RESET button with a small pin, etc..
RESET button with a small pin, etc..
WM-PORT jack
Use this jack to connect the supplied
USB cable, or optional peripheral
devices, such as supported
accessories for the WM-PORT.
USB cable, or optional peripheral
devices, such as supported
accessories for the WM-PORT.
BACK/HOME button
*
1
Press to go up one list screen level, or
to return to the previous menu.
Press and hold the BACK/HOME
button to display the Home menu.
to return to the previous menu.
Press and hold the BACK/HOME
button to display the Home menu.
5-way button
*
2
Starts playback and enables
navigation of the player’s on-screen
menus.
navigation of the player’s on-screen
menus.
NWZ-S515/S516/S615F/S616F/S618F
6
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE (UPPER) SUB ASSY
3-2. CASE (UPPER) SUB ASSY
(Page
(Page
6)
3-3. LCD SUB ASSY (LCD801)
(Page
(Page
7)
3-4. MAIN
BOARD
(Page
7)
3-5. LITHIUM ION BATTERY
(Page
(Page
8)
SET
two screws
(1.4)
(1.4)
model name label
"
#
Open the case (upper) sub assy
in the direction of arrow ".
sheet switch
sheet (SW CN)
R case (upper) sub assy
sheet switch
(CN881)
(CN881)
saranet cushion
two claws
two claws
two claws
Lift up the LCD flexible board
in the direction of arrow #.
Note:
Take care not to break
the sheet switch.
NWZ-S515/S516/S615F/S616F/S618F
7
3-3. LCD SUB ASSY (LCD801)
3-4. MAIN BOARD
four screws
(B1.4)
(B1.4)
LCD flexible board
(CN801)
LCD sub assy
(LCD801)
(LCD801)
BATT wire sheet
connector
(CN901)
screw (B1.4)
switch (S602)
switch (S602)
knob (hold)
knob (hold)
MAIN board
sheet (PWB rib)
holder (multi)
sheet (multi)
Remove the MAIN board
in the direction of the arrow.
Note: On installation of knob (hold),
adjust the position of switch (S602)
and knob (hold).
Note: When the LCD SUB ASSY (LCD801) is replaced, refer to
SUPPLEMENT-2.
Ver. 1.3
NWZ-S515/S516/S615F/S616F/S618F
8
3-5. LITHIUM ION BATTERY
lithium ion battery
Note: Adhesive sheet (BATT) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (BATT) is removed.
adhesive sheet (BATT)
Click on the first or last page to see other NWZ-S515 / NWZ-S516 / NWZ-S615F / NWZ-S616F / NWZ-S618F service manuals if exist.